B312e repair z3x 34.1 error phone dead.29.4 ok TEAM

[mathew_di]

B312e repair z3x 34.1 error phone dead.after flash and z3x 29.4 ok TEAM

why 34.1 error ?


REPAIR INSTRUCTIONS:
1. Fill values, what you need to repair.
2. Press 'Repair' button.
3. Connect the phone in flash mode:
- (Disconnect battery and connect USB cable, insert battery after
connecting.)
- (Or disconnect battery, press vol.down and connect USB cable, insert
battery after connecting).
4. When you see 'Rebooting phone' message in log and your phone is not
restarting automatically,
then you must restart it manually and wait till process will finished.

Operation: Repair
Selected model: SM-B312E
Selected port: Auto, 921600
Software version: 34.1

Connect phone in flash mode
Waiting phone... OK
Sending preloader... OK
Sending loader... OK
Checking Flash ID... OK
Detected Flash ID: 220800EC
Reading security... OK
Patching firmware block... OK
Erase Flash... OK
Writing security... error (1)

Done with Samsung Tool PRO v.34.1


FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. Choose flash option if needed (Erase all flash).
Warning!This option will erase all calibration data!
3. Press 'Flash' button.
4. Connect the phone in flash mode (Reconnect battery and connect USB cable).

Operation: Flash
Selected model: SM-B312E
Selected port: Auto, 921600
Software version: 34.1

Waiting phone... OK
Sending preloader... OK
Sending loader... OK
Checking Flash ID... OK
Detected Flash ID: 220800EC
Erasing flash... OK
Sending BIN/BSY (CATFISH.fls)... OK
Sending CDS (CATFISH.fls)... OK
Sending CSC (SM-B312E_OJV.dffs)... OK
Flashing done (time - 00:02:16)
Done with Samsung Tool PRO v.34.1



REPAIR INSTRUCTIONS:
1. Fill values, what you need to repair.
2. Press 'Repair' button.
3. Connect the phone in flash mode:
- (Disconnect battery and connect USB cable, insert battery after
connecting.)
- (Or disconnect battery, press vol.down and connect USB cable, insert
battery after connecting).
4. When you see 'Rebooting phone' message in log and your phone is not
restarting automatically,
then you must restart it manually and wait till process will finished.

Operation: Repair
Selected model: SM-B312E
Selected port: Auto, 921600
Software version: 29.4

Connect phone in flash mode
Waiting phone... OK
Sending preloader... OK
Sending loader... OK
Checking Flash ID... OK
Detected Flash ID: 220800EC
Reading security... OK
Writing security... OK
Rebooting phone... OK
If phone not powered ON - turn ON phone
Searching Samsung modem... detected COM33
Reading phone info...
Model:
Country code:
Factory SW:
Unique number:
Memory phone:
SW version: B312EXXNE6/B312EOJVNG1
IMEI: 35977
Reading SN... OK
Phone SN: R21FC2B354
Bypass MSL... OK
Repairing IMEI... OK
Repairing Slave IMEI... OK
Repair done

Done with Samsung Tool PRO v.29.4