B3410 with ver B3410JVJJ1 flashing problem! - GSM-Forum

ReyTech · 04-18-2011, 08:55

@BLANG
I have a problem with samsung b3410 and it was with ver B3410JVJJ and i flashed B3410JPJC2_OJPJC3 and while flashing it gave an error! see picture attached!

and when i try to flash with z3x box iget this error

Code:

--------------------------------------------------------------------------
with TAT mode:
Selected model: B3410
Selected com port: COM32
Selected speed port: 921600
Please, connect phone and press shortly power button
Phone Detected
Sending loader1... OK
ARM version 3B11
Sending loader2... OK
Flash ID: 00EC2206000100000034
Start TFS format...
NAND format - Fail
Format TFS - fail
Elapsed time: 16 second, sw ver: 3.5.0010
--------------------------------------------------------------------------
with flsh mode:
Selected model: B3410
Selected com port: COM32
Selected speed port: 921600
Please, connect phone and press shortly power button
Phone Detected
Sending loader1... OK
ARM version 3B11
Sending loader2... OK
Flash ID: 00EC2206000100000034
Start TFS format...
NAND format - Fail
Format TFS - fail
Elapsed time: 15 second, sw ver: 3.5.0010

and i read in previoous thread about "ERASING" and flashing but i am using z3x ver 3.5.010 and its got only eeprom ersing and not flash erase! can u pls help me revive these phones?
WBR
ReyTech.

**blang** · 04-18-2011, 10:48

Quote:

Originally Posted by ReyTech

@BLANG
I have a problem with samsung b3410 and it was with ver B3410JVJJ and i flashed B3410JPJC2_OJPJC3 and while flashing it gave an error! see picture attached!

and when i try to flash with z3x box iget this error

Code:

--------------------------------------------------------------------------
with TAT mode:
Selected model: B3410
Selected com port: COM32
Selected speed port: 921600
Please, connect phone and press shortly power button
Phone Detected
Sending loader1... OK
ARM version 3B11
Sending loader2... OK
Flash ID: 00EC2206000100000034
Start TFS format...
NAND format - Fail
Format TFS - fail
Elapsed time: 16 second, sw ver: 3.5.0010
--------------------------------------------------------------------------
with flsh mode:
Selected model: B3410
Selected com port: COM32
Selected speed port: 921600
Please, connect phone and press shortly power button
Phone Detected
Sending loader1... OK
ARM version 3B11
Sending loader2... OK
Flash ID: 00EC2206000100000034
Start TFS format...
NAND format - Fail
Format TFS - fail
Elapsed time: 15 second, sw ver: 3.5.0010

and i read in previoous thread about "ERASING" and flashing but i am using z3x ver 3.5.010 and its got only eeprom ersing and not flash erase! can u pls help me revive these phones?
WBR
ReyTech.

what condition of phone was before flashing?

ReyTech · 04-18-2011, 10:50

Quote:

Originally Posted by blang

what condition of phone was before flashing?

@blang
all the 3pcs phone was working all right! i just wanted to change language in it! so i flashed 2 and hve 1 which i didnt flash and its on!
WBR
ReyTech

**blang** · 04-18-2011, 10:55

Quote:

Originally Posted by ReyTech

@blang
all the 3pcs phone was working all right! i just wanted to change language in it! so i flashed 2 and hve 1 which i didnt flash and its on!
WBR
ReyTech

try on other pc,. try other speed of port.

ReyTech · 04-18-2011, 12:36

Quote:

Originally Posted by blang

try on other pc,. try other speed of port.

@ blang
I get the same error! on different pc and different speed! what could be the problem?
WBZR
ReyTech.

ReyTech · 04-18-2011, 12:57

@blang
is there any full flash with TF and CSC together which i can flash? as always it stops at tfs and csc only!
WBR
ReyTech.

ReyTech · 04-21-2011, 13:51

@BLANG
CAN U PLS atleast upload b3410JVJJ1 file in support area! so that i can revive the phones?
WBR
ReyTech.

Karlos007 · 05-13-2011, 09:42

I have the same problem. I have tried to flash it with SPT, Z3X, HWK, original Flash loader 7.0.4 05 v 1.5, PNX6517 OneNAND Downloader v0.5 Lite and the result is always the same - error formatting NAND. Flashing *.bin file is ok, but there is a problem with flashing *.tfs and *.csc. I think it is new hardware revision and requires new flash algorithm. When I try to format NAND on a good piece there is also error when formatting NAND.

B.R.

Karel

REZA7268585 · 05-28-2011, 08:58

i have this problem are you solved this

Karlos007 · 05-30-2011, 10:05

Quote:

Originally Posted by REZA7268585

i have this problem are you solved this

Hi, Unfortunatelly I did not solve this problem. I tried many fleshers and boxes and many flashfiles but no succes. There is no possibility to format FS in these B3410.

Karel

promethee23 · 05-30-2011, 15:48

Hello,

the new B3410 (and C3510) have new flash memory

now the new memory is KAP20WN00M (OLD is KAP29SN00M) .
The old flasher (and Z3X program) is not compatible with this new memory.
we have to find the new samsung flasher program (or wait z3x update program).

muthoka · 05-30-2011, 20:03

please try to flash your set with usb mode instead of rj45 and use version 3.5.0018

mohsin10 · 05-30-2011, 20:16

erase eeprom then flash , hope problem will b fix

jmillado · 06-17-2011, 19:20

Quote:

Originally Posted by mohsin10

erase eeprom then flash , hope problem will b fix

Pls. don't make recommendation if you haven't tested this problem before. It will only make additional problem than helping. Thanks.

**blang** · 06-18-2011, 07:35

Added B3410N already. Its new flash chip phone.
Try choise this one for and flash phone.

05-30-2011, 15:48	#11 (permalink)
promethee23 Registered User Join Date: Jan 2009 Location: france Posts: 8 Member: 953264 Status: Offline Thanks Meter: 1	B3410 & C3510 flashing problem Hello, the new B3410 (and C3510) have new flash memory now the new memory is KAP20WN00M (OLD is KAP29SN00M) . The old flasher (and Z3X program) is not compatible with this new memory. we have to find the new samsung flasher program (or wait z3x update program).

05-30-2011, 20:03	#12 (permalink)
muthoka Freak Poster Join Date: Sep 2008 Location: At the center of the Earth Posts: 127 Member: 851708 Status: Offline Sonork: 1000.2brian Thanks Meter: 15	try this please try to flash your set with usb mode instead of rj45 and use version 3.5.0018

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
Nokia 51xx/61xx imei changer ver. 1.10??????	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	04-06-2012 16:22
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

04-18-2011, 12:57	#6 (permalink)
ReyTech No Life Poster Join Date: Apr 2005 Location: india Posts: 1,410 Member: 135945 Status: Offline Thanks Meter: 85	@blang is there any full flash with TF and CSC together which i can flash? as always it stops at tfs and csc only! WBR ReyTech.

04-21-2011, 13:51	#7 (permalink)
ReyTech No Life Poster Join Date: Apr 2005 Location: india Posts: 1,410 Member: 135945 Status: Offline Thanks Meter: 85	@BLANG CAN U PLS atleast upload b3410JVJJ1 file in support area! so that i can revive the phones? WBR ReyTech.

05-13-2011, 09:42	#8 (permalink)
Karlos007 Freak Poster Join Date: Aug 2005 Location: Prague, Czech Republic Age: 41 Posts: 196 Member: 170013 Status: Offline Thanks Meter: 42	I have the same problem. I have tried to flash it with SPT, Z3X, HWK, original Flash loader 7.0.4 05 v 1.5, PNX6517 OneNAND Downloader v0.5 Lite and the result is always the same - error formatting NAND. Flashing .bin file is ok, but there is a problem with flashing .tfs and *.csc. I think it is new hardware revision and requires new flash algorithm. When I try to format NAND on a good piece there is also error when formatting NAND. B.R. Karel

05-28-2011, 08:58	#9 (permalink)
REZA7268585 Junior Member Join Date: Dec 2006 Posts: 34 Member: 406733 Status: Offline Thanks Meter: 2	i have this problem are you solved this

05-30-2011, 20:16	#13 (permalink)
mohsin10 Cheater -Don't Deal with him- Join Date: Apr 2007 Location: Inside of my computer Posts: 759 Member: 490708 Status: Offline Sonork: 100.1587135 Thanks Meter: 569	erase eeprom then flash , hope problem will b fix

06-18-2011, 07:35	#15 (permalink)
blang Product Manager Join Date: Oct 2000 Location: future Posts: 22,431 Member: 2368 Status: Offline Sonork: 100.111111 Thanks Meter: 186,558	Added B3410N already. Its new flash chip phone. Try choise this one for and flash phone.