e1175t imei repair problem...help urgent
 

i have one e1175t ..after sucssesfuly flash imei is 00000000000 now i m trying to write imei but its alsways show error...

here is the log...

Selected model: E1175T
Selected com port: COM168
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone IMEI: 00000000000000
Phone SW: E1175TXEJF1
Phone BT ADDR: 0000-00-000000
Phone SN: RD3Z532546
Deactivated MSL - FAIL
Elapsed time: 13 second, sw ver: 3.4.0064

plz help me how to write imei in that model

try changing tat mode to flash mode in settings

thnks its done deepak but steel imei is 000000000000000

here is the log


elected model: E1175T
Selected com port: COM168
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 54
Sending loader2... OK
Repair IMEI block
Repair IMEI block
Repair IMEI block
Repair IMEI block
Repair - ok
Elapsed time: 40 second, sw ver: 3.4.0064
-------------------------------------------------------------------------------
plz help

did u enter imei and serial no. same as on back label or only imei ????

Put the imei in imei option then write imei.
If again not found success write eeprom first,then repeat the procedure.
Br.
Vijendra Saini.

yes i put both..imei and sn but still same....so now whats the other steps...so i can repair imei

thanks for attention and your reply..but you know what..there is no eeprom file on this model in support area...will u plz upload here if u have...

thanks in advance

oh *** nw am also same problem ., :(
 

my e1175t also same problem :(

any solution .,?

not get reply from z3x team ..still waiting for them reply....i think they dont have any rply or answer or sulution

too have this problem

after repair imei successfully still set shows imei 0000000
i wrote ok set eeprom but problem is still same imei 000000

Selected model: E1175T
Selected com port: COM2
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 54
Sending loader2... OK
Repair IMEI block
Repair IMEI block
Repair IMEI block
Repair IMEI block
Repair - ok
Elapsed time: 37 second, sw ver: 3.4.0064

after repair imei successfully still set shows imei 0000000
i wrote ok set eeprom but problem is still same imei 000000

Selected model: E1175T
Selected com port: COM2
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 54
Sending loader2... OK
Repair IMEI block
Repair IMEI block
Repair IMEI block
Repair IMEI block
Repair - ok
Elapsed time: 37 second, sw ver: 3.4.0064

z3x team how tosolve this problem?

waiting for support
elected model: E1175T
Selected com port: COM2
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 54
Sending loader2... OK
Repair IMEI block
Repair IMEI block
Repair IMEI block
Repair IMEI block
Repair - ok
all is ok still imei 0000000000000000000

Mr. blang...still i have this model ...the phone come with password...so was tryed to read password and but i was not succsec..so i flashed that phone ..phone sucsesfully flashed but imie become 00000000000...i m tring to repair imei..but i m not able to repair it...if u have any trick ..so plz tell me the solution...i got still that phone and see my post its a very old but still there is no reply from u guys...

plz help us to write imie in e1175t,,,thanks in advance