E2530 After unlock IMEI 0000.... - GSM-Forum

Thorenzz · 12-12-2011, 11:18

Hi there... I have done direct unlock of E2530 but after unlock phone IMEI is 00000000... And phone is showing after start "USER FAULT ON ILLEGAL TRIAL". I did try repair OTP, that was ok but problem still same. And when i trying to do IMEI repair, it wont do it.

LOG FROM IMEI REPAIR:

Selected model: E2530
Selected com port: COM17
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Deactivate MSL - fail
Repair - fail
Elapsed time: 24 second, sw ver: 3.5.0029

I seen many similar threads on forum but no answer in any of them.

Z3X please do something about it.

crisstian33 · 12-12-2011, 13:29

Hello I have a friend I also in that state and I can not repair.
Please help Z3X team.

regards

crisstian33 · 12-13-2011, 14:38

Please team.

regards

DJiCE · 02-14-2012, 03:46

im facing the same problem... with 5 e2530, imei is 000000 but cannot change it because it gives bypass msl error

alex999_ · 02-14-2012, 14:17

For repair 00000000000000 imei need fill "imei" and "serial number" field and press OTP button. And use latest version softeware.

zidoun · 05-07-2012, 16:21

from zidoun

Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Erasing ... OK
Writing ... OK
Repair OTP - ok
Elapsed time: 16 second, sw ver: 3.5.0035
-------------------------------------------------------------------------------
Selected model: E2530
Selected com port: COM15
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Phone SN: R21C15HG0T
Deactivate MSL - OK
Calculated code please wait...
Decrypted time: 7 sec
This is zone 0
[PCK]:Enter this without sim #0141*00000000# this is sim lock
[NCK]:Enter this without sim #0111*00000000# this is net lock
[SCK]:Enter this without sim #0121*00000000# this is CP lock
[SPCK]:Enter this without sim #0133*00000000# this is SP lock
[MCK]:Enter this without sim #0199*00000000# this is Master(freeze) code

Read info - ok
Elapsed time: 57 second, sw ver: 3.5.0035
-------------------------------------------------------------------------------

foufou34 · 08-31-2012, 16:49

e2530 imei 000000000000000 successfully reperaid

i use sumsung tool 3.5.007

check imei field
check SN

press OTP bouton

Selected model: E2530
Selected com port: COM5
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Erasing ... OK
Writing ... OK
Repair OTP - ok
Elapsed time: 11 second, sw ver: 3.5.0037

you need only usb cable not need uart for repaire imei

bartjav · 10-18-2012, 20:37

need sumsung tool 3.5.007

pepgra · 05-24-2013, 14:37

I have the same problem but I can not solve, the phone only vibrates and displays the message..

12-12-2011, 11:18	#1 (permalink)
Thorenzz Freak Poster Join Date: Dec 2009 Location: UK. Worcester Age: 35 Posts: 431 Member: 1176876 Status: Offline Sonork: 100.1607051 Thanks Meter: 154	E2530 After unlock IMEI 0000.... Hi there... I have done direct unlock of E2530 but after unlock phone IMEI is 00000000... And phone is showing after start "USER FAULT ON ILLEGAL TRIAL". I did try repair OTP, that was ok but problem still same. And when i trying to do IMEI repair, it wont do it. LOG FROM IMEI REPAIR: Selected model: E2530 Selected com port: COM17 Selected speed port: 921600 Phone must be OFF Press * and connect phone by USB cable Connecting to Device... OK Sending preloader ... OK Sending loader ... OK Damping ... OK Erasing ... OK Writing ... OK After power on phone - connect to UART cable Deactivate MSL - fail Repair - fail Elapsed time: 24 second, sw ver: 3.5.0029 I seen many similar threads on forum but no answer in any of them. Z3X please do something about it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
what prog changes imei on 6110 and how do i do it?	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-31-2012 20:09
Nokia 51xx/61xx imei changer ver. 1.10??????	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	04-06-2012 16:22
6110 imei changer !!!!!!	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	11-21-2011 01:44

12-12-2011, 13:29	#2 (permalink)
crisstian33 Crazy Poster Join Date: Aug 2010 Posts: 58 Member: 1370284 Status: Offline Thanks Meter: 11	Hello I have a friend I also in that state and I can not repair. Please help Z3X team. regards

12-13-2011, 14:38	#3 (permalink)
crisstian33 Crazy Poster Join Date: Aug 2010 Posts: 58 Member: 1370284 Status: Offline Thanks Meter: 11	Please team. regards

02-14-2012, 03:46	#4 (permalink)
DJiCE Freak Poster Join Date: Nov 2004 Posts: 358 Member: 93339 Status: Offline Thanks Meter: 27	im facing the same problem... with 5 e2530, imei is 000000 but cannot change it because it gives bypass msl error

02-14-2012, 14:17	#5 (permalink)
alex999_ Product Supporter Join Date: Aug 2007 Posts: 493 Member: 561932 Status: Offline Thanks Meter: 168	For repair 00000000000000 imei need fill "imei" and "serial number" field and press OTP button. And use latest version softeware.

05-07-2012, 16:21	#6 (permalink)
zidoun Freak Poster Join Date: Jun 2011 Posts: 174 Member: 1595286 Status: Offline Sonork: marocc Thanks Meter: 26	from zidoun Selected speed port: 921600 Phone must be OFF Press * and connect phone by USB cable Connecting to Device... OK Sending preloader ... OK Sending loader ... OK Erasing ... OK Writing ... OK Repair OTP - ok Elapsed time: 16 second, sw ver: 3.5.0035 ------------------------------------------------------------------------------- Selected model: E2530 Selected com port: COM15 Selected speed port: 921600 Phone must be OFF Press * and connect phone by USB cable Connecting to Device... OK Sending preloader ... OK Sending loader ... OK Damping ... OK Erasing ... OK Writing ... OK After power on phone - connect to UART cable Phone SN: R21C15HG0T Deactivate MSL - OK Calculated code please wait... Decrypted time: 7 sec This is zone 0 [PCK]:Enter this without sim #014100000000# this is sim lock [NCK]:Enter this without sim #011100000000# this is net lock [SCK]:Enter this without sim #012100000000# this is CP lock [SPCK]:Enter this without sim #013300000000# this is SP lock [MCK]:Enter this without sim #0199*00000000# this is Master(freeze) code Read info - ok Elapsed time: 57 second, sw ver: 3.5.0035 -------------------------------------------------------------------------------

08-31-2012, 16:49	#7 (permalink)
foufou34 No Life Poster Join Date: Feb 2008 Location: Algeria Posts: 1,481 Member: 695274 Status: Offline Thanks Meter: 814	e2530 imei 000000000000000 successfully reperaid i use sumsung tool 3.5.007 check imei field check SN press OTP bouton Selected model: E2530 Selected com port: COM5 Selected speed port: 921600 Phone must be OFF Press * and connect phone by USB cable Connecting to Device... OK Sending preloader ... OK Sending loader ... OK Erasing ... OK Writing ... OK Repair OTP - ok Elapsed time: 11 second, sw ver: 3.5.0037 you need only usb cable not need uart for repaire imei

10-18-2012, 20:37	#8 (permalink)
bartjav Junior Member Join Date: Sep 2005 Age: 44 Posts: 20 Member: 180842 Status: Offline Thanks Meter: 5	need sumsung tool 3.5.007

05-24-2013, 14:37	#9 (permalink)
pepgra Freak Poster Join Date: May 2004 Age: 49 Posts: 445 Member: 65351 Status: Offline Thanks Meter: 16	I have the same problem but I can not solve, the phone only vibrates and displays the message..