e2652w flashing bug! - GSM-Forum

SicilianBoy · 12-02-2012, 12:24

hi all i try to flash a samsung e2652w and i always see it stop at 88% of sending loader here is a pic:

[LINK]http://imageshack.us/photo/my-images/694/e2652w.jpg/[/LINK]

i already seen lots of people complaining about this problem,its incredible that this bug isnt still solved!

what could i do to flash this phone succesfully?

thanks a lot in advance

SicilianBoy · 12-02-2012, 12:35

i also tried flashing with FlashTool_E2_ROU and here is the log:

Device synchronized.
Injecting EBL-Loader (RPSI).
Injecting EBL
Boot-loader is active
EBL version: 6180_Bootloader_10.0_MKEYSKEY 10..0
Boot mode is: BB
Using: Faster CRC, Writing all blocks
Package length is 16384 - protocol: 3.32
Baud rate set to 921600
Get flash id.
CFI stage 1
Flash ID is: 220800EC
CFI stage 2
Boot process finished

Start downloading item 'CUST:temp_GT-E2652W_OXE.dffs'' from file 'G:\portatile\hobby\flash e2652w\FlashTool_E2_ROU\E2652WOXEKB2_CSC.dffs''.
Sending sec-pack.
Load region 0
Use flash pre-erase.
Sending data.
Process time was 1 min 30 sec.

Stopped at 11% total, 50% current
Timeout occured during packet reception
The phone did not answer within the timeout period. This could be that the communication is interrupted or that the target SW is in an endless loop.
Check the connection to the phone, battery etc. If the problem persists report the error to the developer.
Channel 1 is succesfully closed.

what could i do to flash succesfully this phone?????

rumenshom · 12-02-2012, 13:34

did u try without battery?

SicilianBoy · 12-02-2012, 22:15

no i didnt,i will try soon and post results

12-02-2012, 12:24	#1 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 44 Posts: 2,115 Member: 88333 Status: Offline Thanks Meter: 48	e2652w flashing bug! hi all i try to flash a samsung e2652w and i always see it stop at 88% of sending loader here is a pic: [LINK]http://imageshack.us/photo/my-images/694/e2652w.jpg/[/LINK] i already seen lots of people complaining about this problem,its incredible that this bug isnt still solved! what could i do to flash this phone succesfully? thanks a lot in advance

12-02-2012, 12:35	#2 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 44 Posts: 2,115 Member: 88333 Status: Offline Thanks Meter: 48	i also tried flashing with FlashTool_E2_ROU and here is the log: Device synchronized. Injecting EBL-Loader (RPSI). Injecting EBL Boot-loader is active EBL version: 6180_Bootloader_10.0_MKEYSKEY 10..0 Boot mode is: BB Using: Faster CRC, Writing all blocks Package length is 16384 - protocol: 3.32 Baud rate set to 921600 Get flash id. CFI stage 1 Flash ID is: 220800EC CFI stage 2 Boot process finished Start downloading item 'CUST:temp_GT-E2652W_OXE.dffs'' from file 'G:\portatile\hobby\flash e2652w\FlashTool_E2_ROU\E2652WOXEKB2_CSC.dffs''. Sending sec-pack. Load region 0 Use flash pre-erase. Sending data. Process time was 1 min 30 sec. Stopped at 11% total, 50% current Timeout occured during packet reception The phone did not answer within the timeout period. This could be that the communication is interrupted or that the target SW is in an endless loop. Check the connection to the phone, battery etc. If the problem persists report the error to the developer. Channel 1 is succesfully closed. what could i do to flash succesfully this phone?????

12-02-2012, 13:34	#3 (permalink)
rumenshom No Life Poster Join Date: Nov 2008 Posts: 757 Member: 899774 Status: Offline Sonork: 100.1586303 Thanks Meter: 449	did u try without battery?

12-02-2012, 22:15	#4 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 44 Posts: 2,115 Member: 88333 Status: Offline Thanks Meter: 48	no i didnt,i will try soon and post results