Error during flash Samsung SM-G800F - GSM-Forum

45069 · 09-25-2014, 12:35

Selected model: SM-G800F
Selected port:
Selected port speed: 115200
File analysis... OK
Total file size: 0x7C804CB0
Searching USB Flash Interface... detected COM16
Setup connection... OK
Reading PIT from phone... OK
Saved to C:\Program Files (x86)\Z3X\Samsung\SamsungTool\Pit\SM-G800F_25-9-2014_12-30-8.pit
Sending sboot.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending modem.bin... OK
Sending cache.img... OK
Sending hidden.img... Error
Done with Samsung Tool v.18.1

Is this KNOX problem ?

emmabest · 10-07-2014, 13:40

use odin v3.09 ur problem is solve.

ontopgsm · 11-05-2014, 13:20

I'm having the same exact error only that I got it with odin 3.09 while trying to flash a COA flash to an ORO SM-G800F with the same version. Could it be the flash file?

**blang** · 11-05-2014, 14:44

i think problem becouse you try downgrade phone.
try use latest firmware for this.

a.w.m.wafaz · 11-05-2014, 15:08

flash with new firmware bro it will be ok new modules cannot downgrade at the moment

ontopgsm · 11-06-2014, 15:22

I already mentioned that the version was the same. Now that phone is unbranded and working fine. Anyway here is the whole story:
I got the phone with version G800FXXU1ANH2 (ORO). I flashed it with same version G800FXXU1ANH2 (all files BL+AP+CP+CSC in one) but with COA (unbranded) in CSC and I got error at the same file 3 times on 2 computers. At this point the phone would start-up but would get stuck on a image with a phone, an exclamation mark, a computer and some text saying: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I got it fixed using Kies and flashing it in recovery mode. Now I have the very latest version for ORO which is G800FXXU1ANI2 but at least is working even if it's still branded right? What I did was by using ODIN 3.09 and flashing what is actually an older version labeled G800FXXU1ANG7 only that this time the BL, AP, CP and CSC are individual files not all included in one file. Of course I used a PIT file and ticked "Re-Partition". So a downgrade from G800FXXU1ANI2 to G800FXXU1ANG7 is possible but if in your case it doesn't work and something goes wrong don't blame me.

aram701 · 09-14-2015, 11:19

İ have same problem not downgrade its just have 4.4.2 no other flash g800f just have it i try with odın 3.9 & 3.7 and with pit with out pit cant flash who slove please help

md_koyes · 09-15-2015, 00:40

Z3X box this file G800F_XXU1ANL2_DTM1ANL1 downloads pls

z3x samsung tool heden erorr flash odin v3.09 100% done
Odin3_v3.09
http://downloads3.z3x-team.com/Files...2_DTM1ANL1.zip

Error during flash Samsung SM-G800F
Selected model: SM-G800F
Selected port:
Selected port speed: 115200
File analysis... OK
Total file size: 0x7C804CB0
Searching USB Flash Interface... detected COM16
Setup connection... OK
Reading PIT from phone... OK
Saved to C:\Program Files (x86)\Z3X\Samsung\SamsungTool\Pit\SM-G800F_25-9-2014_12-30-8.pit
Sending sboot.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending modem.bin... OK
Sending cache.img... OK
Sending hidden.img... Error
Done with Samsung Tool v.18.1

odin done logo

<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G800FXXU1ANL2_CL1998311_QB3188587_REV00_user_lo w_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G800FXXU1ANL2_CL1998311_QB3188587_REV00_user_lo w_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G800FXXU1ANL2_CL1998311_QB3188587_REV00_user_lo w_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_DTM_G800FDTM1ANL1_CL3064628_QB3192054_REV00_us er_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> param.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response from boot-loader
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!

09-25-2014, 12:35	#1 (permalink)
45069 No Life Poster Join Date: Apr 2004 Age: 42 Posts: 634 Member: 63646 Status: Offline Sonork: 1670920:45069 Thanks Meter: 23	Error during flash Samsung SM-G800F Selected model: SM-G800F Selected port: Selected port speed: 115200 File analysis... OK Total file size: 0x7C804CB0 Searching USB Flash Interface... detected COM16 Setup connection... OK Reading PIT from phone... OK Saved to C:\Program Files (x86)\Z3X\Samsung\SamsungTool\Pit\SM-G800F_25-9-2014_12-30-8.pit Sending sboot.bin... OK Sending boot.img... OK Sending recovery.img... OK Sending system.img... OK Sending modem.bin... OK Sending cache.img... OK Sending hidden.img... Error Done with Samsung Tool v.18.1 Is this KNOX problem ?

10-07-2014, 13:40	#2 (permalink)
emmabest Insane Poster Join Date: May 2008 Location: Johanesburg south africa Posts: 67 Member: 777161 Status: Offline Thanks Meter: 1	use odin v3.09 ur problem is solve.

11-05-2014, 13:20	#3 (permalink)
ontopgsm Freak Poster Join Date: Nov 2007 Posts: 180 Member: 626209 Status: Offline Thanks Meter: 42	I'm having the same exact error only that I got it with odin 3.09 while trying to flash a COA flash to an ORO SM-G800F with the same version. Could it be the flash file?

11-05-2014, 14:44	#4 (permalink)
blang Product Manager Join Date: Oct 2000 Location: future Posts: 22,431 Member: 2368 Status: Offline Sonork: 100.111111 Thanks Meter: 186,557	i think problem becouse you try downgrade phone. try use latest firmware for this.

11-05-2014, 15:08	#5 (permalink)
a.w.m.wafaz No Life Poster Join Date: May 2008 Location: Sri Lanka , Kandy Age: 34 Posts: 768 Member: 763865 Status: Offline Sonork: Cvlvertcharges Thanks Meter: 123	flash with new firmware bro it will be ok new modules cannot downgrade at the moment

11-06-2014, 15:22	#6 (permalink)
ontopgsm Freak Poster Join Date: Nov 2007 Posts: 180 Member: 626209 Status: Offline Thanks Meter: 42	I already mentioned that the version was the same. Now that phone is unbranded and working fine. Anyway here is the whole story: I got the phone with version G800FXXU1ANH2 (ORO). I flashed it with same version G800FXXU1ANH2 (all files BL+AP+CP+CSC in one) but with COA (unbranded) in CSC and I got error at the same file 3 times on 2 computers. At this point the phone would start-up but would get stuck on a image with a phone, an exclamation mark, a computer and some text saying: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I got it fixed using Kies and flashing it in recovery mode. Now I have the very latest version for ORO which is G800FXXU1ANI2 but at least is working even if it's still branded right? What I did was by using ODIN 3.09 and flashing what is actually an older version labeled G800FXXU1ANG7 only that this time the BL, AP, CP and CSC are individual files not all included in one file. Of course I used a PIT file and ticked "Re-Partition". So a downgrade from G800FXXU1ANI2 to G800FXXU1ANG7 is possible but if in your case it doesn't work and something goes wrong don't blame me.

09-14-2015, 11:19	#7 (permalink)
aram701 Freak Poster Join Date: Aug 2014 Posts: 192 Member: 2249621 Status: Offline Thanks Meter: 22	İ have same problem not downgrade its just have 4.4.2 no other flash g800f just have it i try with odın 3.9 & 3.7 and with pit with out pit cant flash who slove please help

09-15-2015, 00:40	#8 (permalink)
md_koyes Insane Poster Join Date: Jan 2013 Location: sylhet,bangladesh.......? Posts: 66 Member: 1872574 Status: Offline Sonork: 100.1625986 Thanks Meter: 28	Z3X box this file G800F_XXU1ANL2_DTM1ANL1 downloads pls z3x samsung tool heden erorr flash odin v3.09 100% done Odin3_v3.09 http://downloads3.z3x-team.com/Files...2_DTM1ANL1.zip Error during flash Samsung SM-G800F Selected model: SM-G800F Selected port: Selected port speed: 115200 File analysis... OK Total file size: 0x7C804CB0 Searching USB Flash Interface... detected COM16 Setup connection... OK Reading PIT from phone... OK Saved to C:\Program Files (x86)\Z3X\Samsung\SamsungTool\Pit\SM-G800F_25-9-2014_12-30-8.pit Sending sboot.bin... OK Sending boot.img... OK Sending recovery.img... OK Sending system.img... OK Sending modem.bin... OK Sending cache.img... OK Sending hidden.img... Error Done with Samsung Tool v.18.1 odin done logo <ID:0/007> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> BL_G800FXXU1ANL2_CL1998311_QB3188587_REV00_user_lo w_ship.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> AP_G800FXXU1ANL2_CL1998311_QB3188587_REV00_user_lo w_ship.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> CP_G800FXXU1ANL2_CL1998311_QB3188587_REV00_user_lo w_ship.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> CSC_DTM_G800FDTM1ANL1_CL3064628_QB3192054_REV00_us er_low_ship.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/007> Odin v.3 engine (ID:7).. <ID:0/007> File analysis.. <ID:0/007> SetupConnection.. <ID:0/007> Initialzation.. <ID:0/007> Set PIT file.. <ID:0/007> DO NOT TURN OFF TARGET!! <ID:0/007> Get PIT for mapping.. <ID:0/007> Firmware update start.. <ID:0/007> SingleDownload. <ID:0/007> sboot.bin <ID:0/007> NAND Write Start!! <ID:0/007> param.bin <ID:0/007> boot.img <ID:0/007> recovery.img <ID:0/007> system.img <ID:0/007> modem.bin <ID:0/007> Transmission Complete.. <ID:0/007> Now Writing.. Please wait about 2 minutes <ID:0/007> Receive Response from boot-loader <ID:0/007> cache.img <ID:0/007> hidden.img <ID:0/007> RQT_CLOSE !! <ID:0/007> RES OK !! <ID:0/007> Removed!!