g360g unlock - GSM-Forum

kulwinder2002 · 11-21-2015, 15:21

unlock error

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC'.
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SM-G360G
Selected port: COM65 SAMSUNG Mobile USB Serial Port
Software version: 23.4

Reading phone info...
Reading IMEI... OK
IMEI: 356090065699051
Reading security... new type
Bypassing... OK
Unlocking... error

Done with Samsung Tool PRO v.23.4

dippys mobilez · 12-29-2015, 00:28

Samsung G360G unlock done without Root

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC'.
4. Reboot phone.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SM-G360G
Selected port: COM36 SAMSUNG Mobile USB Serial Port
Software version: 23.9

Reading phone info...
Reading IMEI... OK
IMEI: 356090065802473
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.23.9

wong edan · 01-27-2016, 04:02

why there's diag mode not supported in *#9090# ?
i've activated diag mode via repair tab, but stil no diag mode....

wong edan · 01-27-2016, 08:20

There's no enable cp option from recovery,
*#7284# not working, *#9090# diag mode not support (even i've enable diag mode)
It's ver 4.4.4 from telstra.
Really weird....

VIPER_GE · 01-27-2016, 15:44

Quote:

Originally Posted by wong edan

There's no enable cp option from recovery,
*#7284# not working, *#9090# diag mode not support (even i've enable diag mode)
It's ver 4.4.4 from telstra.
Really weird....

try ##3424# and msl code insert, tap Qualcomm USB Settings and tap DM+MODEM+ADB

wong edan · 02-18-2016, 12:49

Quote:

Originally Posted by VIPER_GE

try ##3424# and msl code insert, tap Qualcomm USB Settings and tap DM+MODEM+ADB

Not working, any other ideas ?
Today i got the same model again, and the same telstra v.4.4.4, before was returned.

11-21-2015, 15:21	#1 (permalink)
kulwinder2002 No Life Poster Join Date: Nov 2007 Posts: 687 Member: 629694 Status: Offline Thanks Meter: 50	g360g unlock unlock error UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose 'DM/DUN over HSIC'. 4. Reboot phone. Or use 'Activate Diag' function from 'Repair' tab. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SM-G360G Selected port: COM65 SAMSUNG Mobile USB Serial Port Software version: 23.4 Reading phone info... Reading IMEI... OK IMEI: 356090065699051 Reading security... new type Bypassing... OK Unlocking... error Done with Samsung Tool PRO v.23.4

12-29-2015, 00:28	#2 (permalink)
dippys mobilez Junior Member Join Date: Apr 2010 Posts: 5 Member: 1275385 Status: Offline Thanks Meter: 2	Samsung G360G Unlock done Samsung G360G unlock done without Root UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose 'DM/DUN over HSIC'. 4. Reboot phone. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SM-G360G Selected port: COM36 SAMSUNG Mobile USB Serial Port Software version: 23.9 Reading phone info... Reading IMEI... OK IMEI: 356090065802473 Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.23.9

01-27-2016, 04:02	#3 (permalink)
wong edan No Life Poster Join Date: May 2008 Posts: 975 Member: 775581 Status: Offline Thanks Meter: 186	why there's diag mode not supported in *#9090# ? i've activated diag mode via repair tab, but stil no diag mode....

01-27-2016, 08:20	#4 (permalink)
wong edan No Life Poster Join Date: May 2008 Posts: 975 Member: 775581 Status: Offline Thanks Meter: 186	There's no enable cp option from recovery, #7284# not working, #9090# diag mode not support (even i've enable diag mode) It's ver 4.4.4 from telstra. Really weird....