g7102 dead boot error on z3xjjtag

[lifegood8]

Z3X EasyJtag Software ver. 1.6.1.1
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: ************, ,FW Ver.: 01.50
CMD Pullup Level:2052 mV
CMD Active Level:2299 mV
eMMC Device Information
EMMC CID : 15010038574D4233520007B3C0B63170
EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 03/2014 Rev.0x0
EMMC NAME: 8WMB3R , S/N: ********
EMMC ROM1 (Main User Data) Capacity: 2095982 MB
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Extended CSD rev 1.0 (MMC 4.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 8WMB3R_ 129220790_20140800_2353.extcsd
Done.
3X EasyJtag Software ver. 1.6.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:2052 mV
CMD Active Level:2299 mV
Input file : C:\Documents and Settings\k.t\Desktop\Samsung_SM-G7102_emmc_direct_dump\EMMC_ROM2_00000000_00400000 .bin
Writing 000000400000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Can't access partition #1
Done !!!