for g920f not fix touch inverted and imei check codes not working v27.1 - GSM-Forum

Asad ali khan · 11-08-2016, 08:17

Operation: Repair DRK
Selected model: SM-G920F
Software version: 27.1

Checking local file... ok
Searching server... ok
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM8 detected
Setup connection... ok
Reading data from phone... ok
Sending data to phone... ok
Sending data to phone... ok
Waiting ADB device... ok
Reading phone info...
Recovery build version: 6.0.1
Boot version: G920FXXU4DPJC
Platform: exynos7420
Boot serial: 04157df49c0aef29
Product board: zerolte
Initialization zTool... ok
Running zTool, please wait...
Start... ok
Initialization... ok
Generate and check client proof... ok
Verify proof by client... ok
Checking DRK status... ok
Repairing DMVT key... ok
Rebooting phone... ok
Repair DRK done

z3x team fix this problem z3x every thing ok but dmvt keys not working and touch inverted

Castle2k · 11-08-2016, 08:25

U can fix touch by doing this:
*#2663#
Then Touch: TSP FW Update (General) And your touch-screen will be fixed... but right after that u will have to flash a firmware to make it stick.
If u reset the phone without flashing it touch-screen will revert back again....

Sent from my SM-J320F using Tapatalk

Asad ali khan · 11-08-2016, 08:52

dmvt keys not working i have solved inverted touch but *#06# ,*#2663# not workking

Castle2k · 11-08-2016, 08:57

Quote:

Originally Posted by Asad ali khan

dmvt keys not working i have solved inverted touch but *#06# ,*#2663# not workking

Just flash a full stock firmware and these commands should all works. Unless your phone is a Verizon phone, so they won't work then.

Sent from my SM-J320F using Tapatalk

Asad ali khan · 11-08-2016, 09:00

give me a full 4 files firmware for g920f

chandmob · 11-08-2016, 09:09

Simply update the touch screen panel firmware by dialing *#2663# and select "TSP FW update (General)".
100% ok

voltran2008 · 11-08-2016, 09:33

go into recovery, wipe device...
codes should work after wiping

Asad ali khan · 11-08-2016, 10:10

i tried all methods but bad luck

nessyb · 11-08-2016, 12:50

i solved mine by 4 file firmware

Asad ali khan · 11-10-2016, 06:58

Quote:

Originally Posted by nessyb

i solved mine by 4 file firmware

can u give me 4 files firmware link

11-08-2016, 08:17	#1 (permalink)
Asad ali khan No Life Poster Join Date: Sep 2015 Location: Everywhere Age: 29 Posts: 861 Member: 2454192 Status: Offline Sonork: 100.1674433 Thanks Meter: 693	for g920f not fix touch inverted and imei check codes not working v27.1 Operation: Repair DRK Selected model: SM-G920F Software version: 27.1 Checking local file... ok Searching server... ok Compare local and server file... OK (up to date) Searching USB Flash interface... COM8 detected Setup connection... ok Reading data from phone... ok Sending data to phone... ok Sending data to phone... ok Waiting ADB device... ok Reading phone info... Recovery build version: 6.0.1 Boot version: G920FXXU4DPJC Platform: exynos7420 Boot serial: 04157df49c0aef29 Product board: zerolte Initialization zTool... ok Running zTool, please wait... Start... ok Initialization... ok Generate and check client proof... ok Verify proof by client... ok Checking DRK status... ok Repairing DMVT key... ok Rebooting phone... ok Repair DRK done z3x team fix this problem z3x every thing ok but dmvt keys not working and touch inverted

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-08-2016, 08:25	#2 (permalink)
Castle2k Freak Poster Join Date: May 2012 Location: Haiti, Port-Au-Prince, Carref. Posts: 231 Member: 1763284 Status: Offline Thanks Meter: 56	U can fix touch by doing this: *#2663# Then Touch: TSP FW Update (General) And your touch-screen will be fixed... but right after that u will have to flash a firmware to make it stick. If u reset the phone without flashing it touch-screen will revert back again.... Sent from my SM-J320F using Tapatalk

11-08-2016, 08:52	#3 (permalink)
Asad ali khan No Life Poster Join Date: Sep 2015 Location: Everywhere Age: 29 Posts: 861 Member: 2454192 Status: Offline Sonork: 100.1674433 Thanks Meter: 693	dmvt keys not working i have solved inverted touch but #06# ,#2663# not workking

11-08-2016, 09:00	#5 (permalink)
Asad ali khan No Life Poster Join Date: Sep 2015 Location: Everywhere Age: 29 Posts: 861 Member: 2454192 Status: Offline Sonork: 100.1674433 Thanks Meter: 693	give me a full 4 files firmware for g920f

11-08-2016, 09:09	#6 (permalink)
chandmob Freak Poster Join Date: Jan 2014 Posts: 150 Member: 2097226 Status: Offline Thanks Meter: 4	Simply update the touch screen panel firmware by dialing *#2663# and select "TSP FW update (General)". 100% ok

11-08-2016, 09:33	#7 (permalink)
voltran2008 No Life Poster Join Date: Sep 2008 Location: Space Age: 49 Posts: 1,728 Member: 861795 Status: Offline Thanks Meter: 1,275	go into recovery, wipe device... codes should work after wiping

11-08-2016, 10:10	#8 (permalink)
Asad ali khan No Life Poster Join Date: Sep 2015 Location: Everywhere Age: 29 Posts: 861 Member: 2454192 Status: Offline Sonork: 100.1674433 Thanks Meter: 693	i tried all methods but bad luck

11-08-2016, 12:50	#9 (permalink)
nessyb No Life Poster Join Date: Jan 2013 Location: zimbabwe south africa Posts: 1,441 Member: 1866877 Status: Offline Sonork: 100.1681933 Thanks Meter: 707	i solved mine by 4 file firmware