SM-G930A FRP [Done] - Page 2 - GSM-Forum

treo29 · 11-08-2017, 20:29

FAKE

BR

treo29

latif12 · 12-09-2017, 10:23

IT WORKS I FLASHED WITH Z3X .....IN PDA Samsung_G930_QC_Eng_Boot_Root_v2017-03-01

Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G930A
Android version: 7.0
Product code: SM2G930AZKAATT
Phone version: G930AUCS4BQJ2
PDA version: G930AUCS4BQJ2
CSC version: G930AATT4BQJ2
CSC country code: USA
CSC sales code: ATT
HW version: REV0.6
Phone SN: R58HA3Q3DFV
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2017-10-01
RF cal date: 2016.10.19
IMEI: 35232508311-----
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.30.0

George305JD · 12-17-2017, 16:07

I did use z3x put it on PDA but it got stock un downloading screen

line is full but phone didnt reboot
Operation: Flash
Selected model: SM-G930A
Software version: 29.6

File analysis... OK
Total file size: 0x015E7110 (21 Mb)
Searching USB Flash interface... COM8 detected
Setup connection... OK
Getting device info... OK
Reading PIT from phone... OK
Sending boot.img... OK
Flashing done (time - 00:00:05)
Done with Samsung Tool PRO v.29.6

s a dot com · 03-11-2018, 19:22

MODEL G930A

frp remove succes 7.0

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G930A
Android version: 7.0
Product code: SM2G930AZDAATT
Phone version: G930AUCS4BQE1
PDA version: G930AUCS4BQE1
CSC version: G930AATT4BQE1
CSC country code: USA
CSC sales code: ATT
HW version: REV0.6
Phone SN: R38J20EJFNZ
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2017-05-01
RF cal date: 2017.02.16
IMEI: 355502075
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.30.1

BR.
USMAN
SOFTWARE

Ar.Sohan · 04-30-2018, 10:14

Operation: Reset FRP
Selected model: SM-G930A
Software version: 31.5

Waiting ADB device... Ok
Reading phone info...
Model: SAMSUNG-SM-G930A
Android version: 7.0
Product code: SM2G930AZDAATT
Phone version: G930AUCU4BQA6
PDA version: G930AUCU4BQA6
CSC version: G930AATT4BQA6
CSC country code: USA
CSC sales code: ATT
HW version: REV0.6
Phone SN: R38J10C2G4T
Chip name: MSM8996
Modem board: MSM8996
RF cal date: 2017.01.14
IMEI:
Bypass FRP... Ok
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.31.5

lonelysea · 05-04-2018, 00:35

which file u use for latest firmware to activate adb?

academy_silver · 08-09-2018, 03:15

SM-G930A 8.0 FRP Remove Done By Z3X

Quote:

Operation: Reset FRP
Selected model: SM-G930A
Software version: 33.5

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G930A
Android version: 8.0.0
PDA version: G930AUCU4CRE4
CSC version: G930AATT4CRE4
Phone version: G930AUCU4CRE4
Product code: SM-G930AZKAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R58J33GW6MB
IMEI: 352325083191002
HW version: REV0.6
RF cal date: 2017.03.17
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2018-04-01
Boot Warranty bit: 0
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.33.5

www.youtube.com/watch?v=DDHUcJquTWc

Supreme_05 · 08-09-2018, 03:35

Could you please upload your ADB enabler? Thanks in advance,

BR

:Aishur: · 08-09-2018, 07:07

Don't waste your time, these guys sell even the sh!t
grap combination binary u4 from z3 support

obliviousmnd · 08-10-2018, 05:28

who uses a box for FRP? everyone always making things harder on themselves.

ashahzad_pk · 08-10-2018, 06:37

Since 2018 i dont see any samsung model needs any box anymore. Still people posting adb frp done bla bla bla

Sent from my SM-G960W using Tapatalk

Supreme_05 · 08-11-2018, 16:52

Quote:

Originally Posted by :Aishur:

Don't waste your time, these guys sell even the sh!t
grap combination binary u4 from z3 support

The ADB Enabler is not that easy to find. With all combination files consisted in the support area of Z3X, I myself considerably look for exact binary platform of the unit. The point here sir is the exact unit of the unit and where can we download the combination file to activate ADB.

kamranas · 10-15-2018, 11:41

Samsung (AT&T) [SM-G935A] [SM-G930A] FRP Remove File

So here is process of S7_S7edge_Qualcomm FRP.

Requirements :-

Odin 3.12.X

Odin3+v3.12+(PrinceComsy)

Naugat 7.0 FRP-USA
http://www.mediafire.com/file/8lddqd....0+FRP-USA.rar
Naugat 7.0 FRP-USA
Marshmallow 6.0.1 FRP-USA

Marshmallow 6.0.1 FRP-USA
http://www.mediafire.com/file/gio3so....1+FRP-USA.rar
Process :-

1) Connect phone in download mode using vol down + home + power.

2) Connect phone to pc and open odin.

3) Select boot.tar in Cp in odin and start .

4) After flash your phone adb will be on automatic .

5) Then FRP reset with z3x_umt_miracle any tool .

That's it your S7_S7edge now FRP Remove
Report Post

Droidhotspot · 10-15-2018, 12:06

cp slot on odin is for flashing a modem

flashing a boot.img in cp is not a good idea

good luck just trying to help

Marshalexese · 05-10-2019, 11:33

Please i need help on how to remove frp from samsung g-930a with Z3X.I ve tried so many ways to remove it but no luck

help needed pls

04-30-2018, 10:14	#20 (permalink)
Ar.Sohan Insane Poster Join Date: Jun 2014 Location: Kumarkhali.Kushtia Age: 35 Posts: 85 Member: 2211420 Status: Offline Sonork: 100.1651090 Thanks Meter: 32	SM-G930A FRP / Reactivation Lock Remove Done Operation: Reset FRP Selected model: SM-G930A Software version: 31.5 Waiting ADB device... Ok Reading phone info... Model: SAMSUNG-SM-G930A Android version: 7.0 Product code: SM2G930AZDAATT Phone version: G930AUCU4BQA6 PDA version: G930AUCU4BQA6 CSC version: G930AATT4BQA6 CSC country code: USA CSC sales code: ATT HW version: REV0.6 Phone SN: R38J10C2G4T Chip name: MSM8996 Modem board: MSM8996 RF cal date: 2017.01.14 IMEI: Bypass FRP... Ok For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.31.5 Last edited by ...:::::NP™:::::...; 04-30-2018 at 10:31.

08-10-2018, 05:28	#25 (permalink)
obliviousmnd Freak Poster Join Date: Jun 2016 Posts: 406 Member: 2592628 Status: Offline Thanks Meter: 212	lol who uses a box for FRP? everyone always making things harder on themselves.

10-15-2018, 11:41	#28 (permalink)
kamranas Freak Poster Join Date: Nov 2009 Location: Mirpur Azad Kashmir Age: 34 Posts: 279 Member: 1154111 Status: Offline Sonork: 100.1620855 Thanks Meter: 158	Samsung (AT&T) [SM-G935A] [SM-G930A] FRP Remove File Samsung (AT&T) [SM-G935A] [SM-G930A] FRP Remove File So here is process of S7_S7edge_Qualcomm FRP. Requirements :- Odin 3.12.X Odin3+v3.12+(PrinceComsy) Naugat 7.0 FRP-USA http://www.mediafire.com/file/8lddqd....0+FRP-USA.rar Naugat 7.0 FRP-USA Marshmallow 6.0.1 FRP-USA Marshmallow 6.0.1 FRP-USA http://www.mediafire.com/file/gio3so....1+FRP-USA.rar Process :- 1) Connect phone in download mode using vol down + home + power. 2) Connect phone to pc and open odin. 3) Select boot.tar in Cp in odin and start . 4) After flash your phone adb will be on automatic . 5) Then FRP reset with z3x_umt_miracle any tool . That's it your S7_S7edge now FRP Remove Report Post

05-10-2019, 11:33	#30 (permalink)
Marshalexese Insane Poster Join Date: Dec 2015 Location: Nigeria Posts: 66 Member: 2500418 Status: Offline Thanks Meter: 5	Samsung G-930A 8.0 FRP removal Please i need help on how to remove frp from samsung g-930a with Z3X.I ve tried so many ways to remove it but no luck help needed pls

11-08-2017, 20:29	#16 (permalink)
treo29 No Life Poster Join Date: May 2006 Location: wordwide Age: 48 Posts: 876 Member: 279394 Status: Offline Sonork: 1591760 Thanks Meter: 105	FAKE BR treo29

12-09-2017, 10:23	#17 (permalink)
latif12 Freak Poster Join Date: Nov 2010 Location: UG Age: 31 Posts: 147 Member: 1448098 Status: Offline Thanks Meter: 9	IT WORKS I FLASHED WITH Z3X .....IN PDA Samsung_G930_QC_Eng_Boot_Root_v2017-03-01 Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-G930A Android version: 7.0 Product code: SM2G930AZKAATT Phone version: G930AUCS4BQJ2 PDA version: G930AUCS4BQJ2 CSC version: G930AATT4BQJ2 CSC country code: USA CSC sales code: ATT HW version: REV0.6 Phone SN: R58HA3Q3DFV Chip name: MSM8996 Modem board: MSM8996 Security patch: 2017-10-01 RF cal date: 2016.10.19 IMEI: 35232508311----- Bypass FRP... OK For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.30.0

12-17-2017, 16:07	#18 (permalink)
George305JD Insane Poster Join Date: Jan 2014 Posts: 82 Member: 2105654 Status: Offline Thanks Meter: 7	I did use z3x put it on PDA but it got stock un downloading screen line is full but phone didnt reboot Operation: Flash Selected model: SM-G930A Software version: 29.6 File analysis... OK Total file size: 0x015E7110 (21 Mb) Searching USB Flash interface... COM8 detected Setup connection... OK Getting device info... OK Reading PIT from phone... OK Sending boot.img... OK Flashing done (time - 00:00:05) Done with Samsung Tool PRO v.29.6

03-11-2018, 19:22	#19 (permalink)
s a dot com Freak Poster Join Date: Jul 2012 Location: karachi Age: 31 Posts: 296 Member: 1779651 Status: Offline Sonork: 100.1603336 Thanks Meter: 97	MODEL G930A frp remove succes 7.0 You must activate ADB before reset FRP Yes Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-G930A Android version: 7.0 Product code: SM2G930AZDAATT Phone version: G930AUCS4BQE1 PDA version: G930AUCS4BQE1 CSC version: G930AATT4BQE1 CSC country code: USA CSC sales code: ATT HW version: REV0.6 Phone SN: R38J20EJFNZ Chip name: MSM8996 Modem board: MSM8996 Security patch: 2017-05-01 RF cal date: 2017.02.16 IMEI: 355502075 Bypass FRP... OK For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.30.1 BR. USMAN SOFTWARE

05-04-2018, 00:35	#21 (permalink)
lonelysea Freak Poster Join Date: Nov 2015 Posts: 107 Member: 2492756 Status: Offline Thanks Meter: 15	which file u use for latest firmware to activate adb?

08-09-2018, 03:35	#23 (permalink)
Supreme_05 Insane Poster Join Date: Feb 2017 Location: Parla del Mar de Oriente Posts: 60 Member: 2682716 Status: Offline Thanks Meter: 10	Could you please upload your ADB enabler? Thanks in advance, BR

08-09-2018, 07:07	#24 (permalink)
:Aishur: No Life Poster Join Date: Jun 2010 Age: 14 Posts: 2,864 Member: 1315677 Status: Offline Thanks Meter: 1,439	Don't waste your time, these guys sell even the sh!t grap combination binary u4 from z3 support

08-10-2018, 06:37	#26 (permalink)
ashahzad_pk No Life Poster Join Date: Aug 2005 Location: Canada Age: 44 Posts: 744 Member: 169896 Status: Offline Thanks Meter: 323	Since 2018 i dont see any samsung model needs any box anymore. Still people posting adb frp done bla bla bla Sent from my SM-G960W using Tapatalk

10-15-2018, 12:06	#29 (permalink)
Droidhotspot Insane Poster Join Date: Jul 2016 Posts: 67 Member: 2604086 Status: Offline Sonork: WHATSAPP-12142824404 Thanks Meter: 39	cp slot on odin is for flashing a modem flashing a boot.img in cp is not a good idea good luck just trying to help