g950w unlock error with credits

[jainmunda]

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will apear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G950W
Selected port: COM5 Z3X BOX Serial Port
Software version: 29.5

Checking Login and Password... OK
Ballance: 45 crd.
Waiting ADB device... OK
Reading phone info...
Model: SM-G950W
Android version: 7.0
Product code: SM-G950WZKAXAC
Phone version: G950WVLU1AQG5
PDA version: G950WVLU1AQG5
CSC version: G950WOYA1AQG5
CSC country code: Canada
CSC sales code: XAC
HW version: REV1.0
Phone SN: R28J807K8VT
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-07-01
RF cal date: 2017.08.04
IMEI: 355757083041679
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM43 detected
Reading data from phone... error (3)

Done with Samsung Tool PRO v.29.5

plz reply whats the problem

[blang]

Originally Posted by jainmunda

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will apear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G950W
Selected port: COM5 Z3X BOX Serial Port
Software version: 29.5

Checking Login and Password... OK
Ballance: 45 crd.
Waiting ADB device... OK
Reading phone info...
Model: SM-G950W
Android version: 7.0
Product code: SM-G950WZKAXAC
Phone version: G950WVLU1AQG5
PDA version: G950WVLU1AQG5
CSC version: G950WOYA1AQG5
CSC country code: Canada
CSC sales code: XAC
HW version: REV1.0
Phone SN: R28J807K8VT
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-07-01
RF cal date: 2017.08.04
IMEI: 355757083041679
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM43 detected
Reading data from phone... error (3)

Done with Samsung Tool PRO v.29.5

plz reply whats the problem

full reset and try again.
should work. every day i see success code reading for this model.

[jainmunda]

not done with z3x but successful code read with ******

[jainmunda]

Again same with other phone same **** no solution

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will apear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G950W
Selected port: COM5 Z3X BOX Serial Port
Software version: 29.6

Checking Login and Password... OK
Ballance: 45 crd.
Waiting ADB device... OK
Reading phone info...
Model: SM-G950W
Android version: 7.0
Product code: SM-G950WZKABMC
Phone version: G950WVLU1AQI3
PDA version: G950WVLU1AQI3
CSC version: G950WOYA1AQI3
CSC country code: Canada
CSC sales code: BMC
HW version: REV1.0
Phone SN: R28J91Q4ZCW
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-08-01
RF cal date: 2017.09.14
IMEI: 351811090439287
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM11 detected
Reading data from phone... error (3)

Done with Samsung Tool PRO v.29.6