c3500 code user , help in z3x. - GSM-Forum

celltellpb · 06-20-2011, 14:42

I'm two samsun C3500 code with the phone but can not identify him in any way Z3X. I get the message "Press volume up + lock" but the pc asks me not match any drive. I tried with battery and battery, but gave no right of ways. In NBOX I can at least put it into tat mode using the RJ45 cable, but not unlock.
I ask the help of those already able to communicate with this model.

Thanks advanced

nikhil_gsm · 06-20-2011, 15:01

You can use modified cable on RJ-45 port , try read code directly .

Selected model: C3500
Selected com port: COM3
Selected speed port: 921600
Please, connect phone and press power button 3 seconds

celltellpb · 06-20-2011, 21:11

I emulate the nbox via directcom , but same resut :
Selected com port: COM13
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone SW: C3500UIKA4_
Phone CSC: C3500ZTMKA4_
Phone BT ADDR: 8C71-F8-DD69B6
Phone IMEI: 35592304004652
Deactivated MSL - FAIL
Elapsed time: 20 second, sw ver: 3.5.0022

celltellpb · 06-25-2011, 03:49

Please Help support....

tsabila · 06-25-2011, 05:23

try with usb, install driver correctly will help you

celltellpb · 07-05-2011, 22:19

I got! via HWK version 2.2.0.1

06-20-2011, 14:42	#1 (permalink)
celltellpb No Life Poster Join Date: Jan 2008 Location: Pb - BRAZIL Posts: 640 Member: 689942 Status: Offline Thanks Meter: 312	c3500 code user , help in z3x. I'm two samsun C3500 code with the phone but can not identify him in any way Z3X. I get the message "Press volume up + lock" but the pc asks me not match any drive. I tried with battery and battery, but gave no right of ways. In NBOX I can at least put it into tat mode using the RJ45 cable, but not unlock. I ask the help of those already able to communicate with this model. Thanks advanced

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
Help: Forgot my 6110 user lock code!!	GByte9	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	02-26-2016 14:52
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29

06-20-2011, 15:01	#2 (permalink)
nikhil_gsm Freak Poster Join Date: Dec 2003 Location: CELLCARE Posts: 272 Member: 47627 Status: Offline Sonork: 100.1596335 Thanks Meter: 124	You can use modified cable on RJ-45 port , try read code directly . Selected model: C3500 Selected com port: COM3 Selected speed port: 921600 Please, connect phone and press power button 3 seconds

06-20-2011, 21:11	#3 (permalink)
celltellpb No Life Poster Join Date: Jan 2008 Location: Pb - BRAZIL Posts: 640 Member: 689942 Status: Offline Thanks Meter: 312	I emulate the nbox via directcom , but same resut : Selected com port: COM13 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Use automatic parameters Phone in TAT MODE Phone SW: C3500UIKA4_ Phone CSC: C3500ZTMKA4_ Phone BT ADDR: 8C71-F8-DD69B6 Phone IMEI: 35592304004652 Deactivated MSL - FAIL Elapsed time: 20 second, sw ver: 3.5.0022

06-25-2011, 03:49	#4 (permalink)
celltellpb No Life Poster Join Date: Jan 2008 Location: Pb - BRAZIL Posts: 640 Member: 689942 Status: Offline Thanks Meter: 312	Please Help support....

06-25-2011, 05:23	#5 (permalink)
tsabila Freak Poster Join Date: Sep 2009 Location: another place Posts: 462 Member: 1128422 Status: Offline Thanks Meter: 67	try with usb, install driver correctly will help you

07-05-2011, 22:19	#6 (permalink)
celltellpb No Life Poster Join Date: Jan 2008 Location: Pb - BRAZIL Posts: 640 Member: 689942 Status: Offline Thanks Meter: 312	I got! via HWK version 2.2.0.1