HOW TO: Unlock I9001 - GSM-Forum

mk · 11-03-2011, 10:03

1: Type *#7284# and select Modem
2: Type *#9090# and select USB (1)
3: Reboot phone
4: Connect phone and install drivers
5: Select diagnostic port
6: Press unlock or Read codes

If *#9090# code not work - then :
- power off phone
- connect microuart cable and power on phone !
- now code must work
- select USB Diag and reboot phone

hasni 02 · 11-03-2011, 10:17

thanks z3x is the best pleas add s5560i repair imei

ReyTech · 11-03-2011, 11:24

Quote:

Originally Posted by mk

1: Type *#7284# and select Modem
2: Type *#9090# and select USB (1)
3: Reboot phone
4: Connect phone and install drivers
5: Select diagnostic port
6: Press unlock or Read codes

If *#9090# code not work - then :
- power off phone
- connect microuart cable and power on phone !
- now code must work
- select USB Diag and reboot phone

@mk
just following your instructions! can u tell me what to select (flash patched) or (root) while pressing unlock or read codes? as nothing seems to work for me pls see logs;

Quote:

Count supported models - 255
Searching Samsung USB Modem... Detected (COM8)
Model: GT-I9001
SW: I9001XXKE8
IMEI: 357853041xxxx05
Done with Samsung Tool ver 11.3
Starting ADB Server... OK
Phone Not Found
Done with Samsung Tool ver 11.3
Starting ADB Server... OK
Phone Not Found
Done with Samsung Tool ver 11.3
Searching Samsung USB Modem... Detected (COM8)
Model: GT-I9001
SW: I9001XXKE8
IMEI: 357853041xxxx05
Done with Samsung Tool ver 11.3
Searching Samsung USB Modem... detected (COM8)
Reading Phone Info... OK
Bypass MSL... Error, Flash Patched Firmware First
Done with Samsung Tool ver 11.3
Searching Samsung USB Modem... detected (COM8)
Reading Phone Info... OK
Bypass MSL... Error, Flash Patched Firmware First
Done with Samsung Tool ver 11.3
Starting ADB Server... OK
Phone Not Found
Done with Samsung Tool ver 11.3

do we have to root?
can we use the same patch file as i9000?
if not where can we get root file or patch file for this model, as not therein support area?
pls inform?
WBR
REytech.

sassa_01 · 11-03-2011, 12:39

Thank you for the information

mk · 11-03-2011, 12:51

use latest (11.4) version

zamakoti · 11-03-2011, 14:00

*#9090# code not work

kaleem munir · 11-03-2011, 15:19

Quote:

Originally Posted by zamakoti

*#9090# code not work

If *#9090# code not work - then :
- power off phone
- connect microuart cable and power on phone !
- now code must work
- select USB Diag and reboot phone

SFR-_-MAN · 11-03-2011, 15:31

Thank you for the information !

GSM PAVIA · 11-03-2011, 17:05

tested and worked unlock i9001 verssion 2.3.3

Count supported models - 260
Reading Phone Info... OK
PDA/CSC Version: I9001XXKF8/I9001OXAKF1
Phone version: I9001XXKF8
Phone HW: MP 0.500
Cal Date: 2011.08.19
Done with Samsung Tool ver 11.4
Reading Phone Info... OK
Phone S/N: RFNB848828
Build: M7630A-ABBQMAZM-4.0.40
IMEI: 35
PDA/CSC Version: I9001XXKF8/I9001OXAKF1
Phone version: I9001XXKF8
Phone HW: MP 0.500
Cal Date: 2011.08.19
Bypass MSL... OK
Reading Codes... OK
MCK: 69429359
NCK: 58162957
NSCK: 00000000
SPCK: 00000000
CPCK: 00000000
Done with Samsung Tool ver 11.4

skusnierczyk · 11-06-2011, 01:53

I find better solution
Connect i9001 to box with service cable ( i find original cables with z3x box , i think everyone cables rj45 and micro usb , uart ? )
And press unlock button

Unlocking ... OK

alamgarh · 11-06-2011, 05:12

What is the meaning of These options.

Selected Model is 19001 , 19003 or other
1: Re-Partition
2: Read Codes (ROOT)
3: Unlock (ROOT)
4: Read Codes (PATCH)
5: Repair EFS

EDV11 · 11-07-2011, 15:16

I have followed all the instructions but when I enter *#9090# phone shows nothing.

I have also tried powering the phone off, connecting the microUART cable (Z3X-SAM005 for C3300K and S7070), powering it on again and enter the code, but nothing shows.

Also tried using the box as interface, no results.

Downgraded to 2.3.3 and that did not help

This is all I get

No Answer From Phone (COM313)
Done with Samsung Tool ver 11.4

Charism · 11-07-2011, 16:36

thanks z3x,thanks z3x

telerif · 11-07-2011, 18:11

Quote:

Originally Posted by mk

1: Type *#7284# and select Modem
2: Type *#9090# and select USB (1)
3: Reboot phone
4: Connect phone and install drivers
5: Select diagnostic port
6: Press unlock or Read codes

If *#9090# code not work - then :
- power off phone
- connect microuart cable and power on phone !
- now code must work
- select USB Diag and reboot phone

tested and this instructions not work

moli · 11-07-2011, 18:18

I've tried possible combination with that sequencene (input it with rooted phone, unrooted phone, downgraded phone to 2.3.3, with uart connected, without uart connected, etc etc.) and no results with *#9090#. This phone is driving me mad

. Maybe there's a hidden code to activate it?
By the way, this phone is android 2.3.4 and flash is i9001bvkp8, csc is i9001amkp9. If it helps...
BR

11-03-2011, 10:03	#1 (permalink)
mk Product Manager Join Date: Nov 2005 Posts: 412 Member: 199768 Status: Offline Sonork: 100.1607571 Thanks: 67 Thanked 15,989 Times in 216 Posts	HOW TO: Unlock I9001 1: Type #7284# and select Modem 2: Type #9090# and select USB (1) 3: Reboot phone 4: Connect phone and install drivers 5: Select diagnostic port 6: Press unlock or Read codes If #9090# code not work - then : - power off phone - connect microuart cable and power on phone ! - now code must work - select USB Diag and reboot phone Last edited by mk; 11-03-2011 at 14:05.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	23	09-16-2012 23:57
FAQ about unlock n0kia	man0n	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	11-29-2010 18:06
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	4	07-09-1999 22:08

11-03-2011, 10:17	#2 (permalink)
hasni 02 Freak Poster Join Date: Jan 2008 Posts: 168 Member: 683625 Status: Online Thanks: 517 Thanked 49 Times in 36 Posts	thanks z3x is the best pleas add s5560i repair imei

11-03-2011, 12:39	#4 (permalink)
sassa_01 No Life Poster Join Date: Mar 2006 Location: morroco Posts: 864 Member: 245026 Status: Offline Thanks: 875 Thanked 385 Times in 189 Posts	Thank you for the information

11-03-2011, 12:51	#5 (permalink)
mk Product Manager Join Date: Nov 2005 Posts: 412 Member: 199768 Status: Offline Sonork: 100.1607571 Thanks: 67 Thanked 15,989 Times in 216 Posts	use latest (11.4) version

11-03-2011, 14:00	#6 (permalink)
zamakoti Junior Member Join Date: Apr 2005 Age: 23 Posts: 11 Member: 133987 Status: Offline Thanks: 13 Thanked 1 Time in 1 Post	*#9090# code not work

11-03-2011, 15:31	#8 (permalink)
SFR-_-MAN Freak Poster Join Date: Aug 2011 Location: SFR Posts: 212 Member: 1633151 Status: Offline Sonork: SFR-_-MAN Thanks: 587 Thanked 70 Times in 30 Posts	Thank you for the information !

11-03-2011, 17:05	#9 (permalink)
GSM PAVIA No Life Poster Join Date: Feb 2006 Location: campioni del mondo Posts: 1,325 Member: 235881 Status: Offline Thanks: 43 Thanked 222 Times in 147 Posts	tested and worked unlock i9001 verssion 2.3.3 Count supported models - 260 Reading Phone Info... OK PDA/CSC Version: I9001XXKF8/I9001OXAKF1 Phone version: I9001XXKF8 Phone HW: MP 0.500 Cal Date: 2011.08.19 Done with Samsung Tool ver 11.4 Reading Phone Info... OK Phone S/N: RFNB848828 Build: M7630A-ABBQMAZM-4.0.40 IMEI: 35 PDA/CSC Version: I9001XXKF8/I9001OXAKF1 Phone version: I9001XXKF8 Phone HW: MP 0.500 Cal Date: 2011.08.19 Bypass MSL... OK Reading Codes... OK MCK: 69429359 NCK: 58162957 NSCK: 00000000 SPCK: 00000000 CPCK: 00000000 Done with Samsung Tool ver 11.4

11-06-2011, 01:53	#10 (permalink)
skusnierczyk Junior Member Join Date: Oct 2011 Posts: 2 Member: 1672974 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I find better solution Connect i9001 to box with service cable ( i find original cables with z3x box , i think everyone cables rj45 and micro usb , uart ? ) And press unlock button Unlocking ... OK

11-06-2011, 05:12	#11 (permalink)
alamgarh No Life Poster Join Date: Sep 2006 Location: MX-KEY is the BEST NOKIA TOOL Posts: 2,951 Member: 358694 Status: Offline Thanks: 736 Thanked 727 Times in 383 Posts	What is the meaning of These options. Selected Model is 19001 , 19003 or other 1: Re-Partition 2: Read Codes (ROOT) 3: Unlock (ROOT) 4: Read Codes (PATCH) 5: Repair EFS

11-07-2011, 15:16	#12 (permalink)
EDV11 No Life Poster Join Date: Feb 2002 Location: Spain Posts: 697 Member: 9489 Status: Offline Thanks: 48 Thanked 29 Times in 24 Posts	I have followed all the instructions but when I enter *#9090# phone shows nothing. I have also tried powering the phone off, connecting the microUART cable (Z3X-SAM005 for C3300K and S7070), powering it on again and enter the code, but nothing shows. Also tried using the box as interface, no results. Downgraded to 2.3.3 and that did not help This is all I get No Answer From Phone (COM313) Done with Samsung Tool ver 11.4

11-07-2011, 16:36	#13 (permalink)
Charism Freak Poster Join Date: Feb 2011 Location: EU Posts: 143 Member: 1507173 Status: Offline Thanks: 238 Thanked 40 Times in 24 Posts	thanks z3x,thanks z3x

11-07-2011, 18:18	#15 (permalink)
moli Freak Poster Join Date: Jan 2002 Location: sp coastline Posts: 394 Member: 8802 Status: Offline Thanks: 41 Thanked 16 Times in 14 Posts	I've tried possible combination with that sequencene (input it with rooted phone, unrooted phone, downgraded phone to 2.3.3, with uart connected, without uart connected, etc etc.) and no results with *#9090#. This phone is driving me mad . Maybe there's a hidden code to activate it? By the way, this phone is android 2.3.4 and flash is i9001bvkp8, csc is i9001amkp9. If it helps... BR