How to unlock samsung E1280 error - GSM-Forum

billy111 · 11-10-2014, 14:29

Hi guys
i am unlocking samsung e1280 with z3x
i have downloaded spd drivers on my pc. every thing goes fine but at end it give me an error
any one can help me plz
Thanks

Selected model: E1280
Selected port: COM4 Z3X BOX Serial Port
Selected port speed: 460800
Waiting phone... detected COM157
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI Master: 3535==========
Phone HW: MP 0.501
Product code: GT-E1280BKFEVR
Sending NV... error
Done with Samsung Tool v.18.3

Selected model: E1280
Selected port: COM4 Z3X BOX Serial Port
Selected port speed: 460800
Waiting phone... detected COM154
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI Master: 3535==========
Phone HW: MP 0.501
Product code: GT-E1280BKFEVR
Sending NV... error
Done with Samsung Tool v.18.3

mrinalkarmakar · 11-10-2014, 14:48

Use FLASH mode while charging via USB press OK and then ON/OFF button
release ON/OFF keep OK press

billy111 · 11-10-2014, 15:05

i use flash mode press ok button and inserted usb and pressed on off and then ok again
still no luck

mrinalkarmakar · 11-10-2014, 15:13

Check if any mistake
Selected model with handset model or other

alo-alo · 11-10-2014, 15:14

Try Normal Mode,will be OK.

billy111 · 11-10-2014, 15:53

it dosn't do direct unlock but it does read code
i don't know how to enter unlock code in this model e1280
when i put non accepted sim in phone, it only show sim restricted don't show anything else

Selected model: E1280
Selected port: COM4 Z3X BOX Serial Port
Selected port speed: 921600
Waiting phone... detected COM154
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI Master: 3535===========
Phone HW: MP 0.501
Product code: GT-E1280BKFEVR
Please wait, calculating codes... OK (time - 00:00:35)
Freeze code: 51482729
NET lock: 17071628
Sub lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool v.18.3

dojran · 11-11-2014, 13:22

Quote:

Originally Posted by billy111

it dosn't do direct unlock but it does read code
i don't know how to enter unlock code in this model e1280
when i put non accepted sim in phone, it only show sim restricted don't show anything else

Selected model: E1280
Selected port: COM4 Z3X BOX Serial Port
Selected port speed: 921600
Waiting phone... detected COM154
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI Master: 3535===========
Phone HW: MP 0.501
Product code: GT-E1280BKFEVR
Please wait, calculating codes... OK (time - 00:00:35)
Freeze code: 51482729
NET lock: 17071628
Sub lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool v.18.3

instal v17.0 and be ok

Code:

Selected model: E1280
Selected port: COM4 Z3X BOX Serial Port
Selected port speed: 921600
Waiting phone... detected COM212
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI Master: 3535530xxxxxxxx
Phone HW: MP 0.501
Product code: GT-E1280BKAMOB
Sending NV... OK
Unlock done
Done with Samsung Tool v.17.0
Done with Samsung Tool v.17.0

fcbarca111 · 12-26-2014, 23:42

Quote:

Originally Posted by dojran

instal v17.0 and be ok

Code:

Selected model: E1280
Selected port: COM4 Z3X BOX Serial Port
Selected port speed: 921600
Waiting phone... detected COM212
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI Master: 3535530xxxxxxxx
Phone HW: MP 0.501
Product code: GT-E1280BKAMOB
Sending NV... OK
Unlock done
Done with Samsung Tool v.17.0
Done with Samsung Tool v.17.0

druze od kade da go svalam samsung tool?

BekoMobil · 12-27-2014, 00:25

direct unlock not work,,,tick flash mode press reed codes,pres home buton insert usb cable inn powered off phone.and unlock by code

11-10-2014, 14:29	#1 (permalink)
billy111 Freak Poster Join Date: Aug 2012 Location: Leeds England Posts: 130 Member: 1795236 Status: Offline Thanks Meter: 14	How to unlock samsung E1280 error Hi guys i am unlocking samsung e1280 with z3x i have downloaded spd drivers on my pc. every thing goes fine but at end it give me an error any one can help me plz Thanks Selected model: E1280 Selected port: COM4 Z3X BOX Serial Port Selected port speed: 460800 Waiting phone... detected COM157 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Checking NV... OK IMEI Master: 3535========== Phone HW: MP 0.501 Product code: GT-E1280BKFEVR Sending NV... error Done with Samsung Tool v.18.3 Selected model: E1280 Selected port: COM4 Z3X BOX Serial Port Selected port speed: 460800 Waiting phone... detected COM154 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Checking NV... OK IMEI Master: 3535========== Phone HW: MP 0.501 Product code: GT-E1280BKFEVR Sending NV... error Done with Samsung Tool v.18.3

11-10-2014, 14:48	#2 (permalink)
mrinalkarmakar Major Poster Join Date: Mar 2011 Location: Kolkata Age: 37 Posts: 47 Member: 1530205 Status: Offline Sonork: 100409329 Thanks Meter: 13	Use FLASH mode while charging via USB press OK and then ON/OFF button release ON/OFF keep OK press

11-10-2014, 15:05	#3 (permalink)
billy111 Freak Poster Join Date: Aug 2012 Location: Leeds England Posts: 130 Member: 1795236 Status: Offline Thanks Meter: 14	i use flash mode press ok button and inserted usb and pressed on off and then ok again still no luck

11-10-2014, 15:13	#4 (permalink)
mrinalkarmakar Major Poster Join Date: Mar 2011 Location: Kolkata Age: 37 Posts: 47 Member: 1530205 Status: Offline Sonork: 100409329 Thanks Meter: 13	Check if any mistake Selected model with handset model or other

11-10-2014, 15:14	#5 (permalink)
alo-alo Registered User Join Date: Dec 2005 Location: Montenegro, Kotor Posts: 121 Member: 211475 Status: Offline Thanks Meter: 11	Try Normal Mode,will be OK.

11-10-2014, 15:53	#6 (permalink)
billy111 Freak Poster Join Date: Aug 2012 Location: Leeds England Posts: 130 Member: 1795236 Status: Offline Thanks Meter: 14	it dosn't do direct unlock but it does read code i don't know how to enter unlock code in this model e1280 when i put non accepted sim in phone, it only show sim restricted don't show anything else Selected model: E1280 Selected port: COM4 Z3X BOX Serial Port Selected port speed: 921600 Waiting phone... detected COM154 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Checking NV... OK IMEI Master: 3535=========== Phone HW: MP 0.501 Product code: GT-E1280BKFEVR Please wait, calculating codes... OK (time - 00:00:35) Freeze code: 51482729 NET lock: 17071628 Sub lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool v.18.3

12-27-2014, 00:25	#9 (permalink)
BekoMobil No Life Poster Join Date: Jan 2006 Location: skopje Macedonija Posts: 866 Member: 220736 Status: Offline Thanks Meter: 90	direct unlock not work,,,tick flash mode press reed codes,pres home buton insert usb cable inn powered off phone.and unlock by code