i9070 flashing error

[unlockworld]

Selected model: I9070
Selected port: COM8 Z3X BOX Serial Port
Selected port speed: 115200
File analysis... OK
Total file size: 0x2EF9E8B5
Searching USB Flash Interface... detected COM74
Setup connection... OK
Reading PIT from phone... OK
Saved to C:\Program Files\Z3X\Samsung\SamsungTool\Pit\I9070_8-5-2014_14-15-6.pit
Sending cache.img.md5... OK
Sending hidden.img.md5... OK
Sending kernel.bin.md5... OK
Sending kernel2.bin.md5... OK
Sending modem.bin.md5... Error
Done with Samsung Tool v.17.3

[hm.faizan]

flash with odin flasher and also change flash file

[unlockworld]

i download firmware from support
CODE8_I9070XXLQE_1122398_REV00_user_low_ship.tar.m d5
CODE16_I9070XXLQE_1122398_REV00_user_low_ship.tar. md5
CSC_OXE_I9070OXELPA_1126604_REV00_user_low_ship.ta r.md5
GT-I9070_EUR_XX_8G.pit
GT-I9070_EUR_XX_16G.pit

what is the flashing mathod with these files???????

[unlockworld]

still waiting for help

[abbasgh]

download one package file from "s a m m o b i l e dot com tab firmware" (without spaces) tab firmware and flash with odin

[Udini]

Originally Posted by unlockworld

i download firmware from support
CODE8_I9070XXLQE_1122398_REV00_user_low_ship.tar.m d5
CODE16_I9070XXLQE_1122398_REV00_user_low_ship.tar. md5
CSC_OXE_I9070OXELPA_1126604_REV00_user_low_ship.ta r.md5
GT-I9070_EUR_XX_8G.pit
GT-I9070_EUR_XX_16G.pit

what is the flashing mathod with these files???????

CODE8_I9070XXLQE_1122398_REV00_user_low_ship.tar.m d5 is for 8Gb models
CODE16_I9070XXLQE_1122398_REV00_user_low_ship.tar. md5 is for 16Gb models

there is no Phone/Modem file to use. Only PDA and CSC.

simple search on google: How to flash I9070

and you will find there a link:
How To Update Samsung I9070 Galaxy S Advance Firmware

from TSAR3000.com

Originally Posted by TSAR3000.com

Firmware Update Steps ( Full Firmware Package ):
- Run Odin flasher and make sure to check these options: Re-Partition, Auto Reboot, F.Reset Time.
- From the Firmware Package you can select:

PIT: GT-I9070_xx....pit
PDA: CODE_GT-I9070xxxxx.....tar.md5

CSC: CSC_GT-I9070xxxxx......tar.md5

- Now put the phone into Download Mode: Volume Down + Home + Power, Then press Volume Up.
- Connect USB cable to Phone and PC and make sure USB drivers are installed.
- When the Odin program detect the Com number of the Phone that mean all is OK.
- Click Start button and do not touch the phone till it is rebooted by the Odin program.
- Disconnect the phone and wait till it is fully on.
- After you did all the start Up settings you had better do full reset *2767*3855#.

[rojazgsm]

Same problem with me but this solution is not not useful i tried binary 1,2 &4 for different firmware from dfrnt site but when writting system i got error and phone still stuck on logo. Any idea plz