|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
 |
| | LinkBack | Thread Tools | Display Modes |
09-11-2018, 20:44
| #1 (permalink) |
| Freak Poster  Join Date: Oct 2006 Location: Philippines
Posts: 169
Member: 379023 Status: Offline Thanks Meter: 38 | j250g unlock error, need to update firmware? it was lock from spark new zealand, error pop up, i even reflash using a vodafone fiji firmware but the error still the same? it says please update phone firmware? UNLOCK INSTRUCTIONS: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Run dialer and type *#0*# (service mode will appear). 3. Connect the phone to UART cable, choose correct COM port in port settings. 4. Press 'Unlock' button. 5. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Read Codes via Server Selected model: SM-J250G Selected port: COM374 Z3X BOX Serial Port Software version: 33.8 Checking Login and Password... OK Ballance: 35 crd. You have 35 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-J250G Android version: 7.1.1 PDA version: J250GDXU2ARF2 CSC version: J250GVFJ2ARF2 Phone version: J250GDXU2ARF2 Product code: SM-J250GZSAVFJ CSC country code: Fiji CSC sales code: VFJ Phone SN: R28K30D1FAR IMEI: 354062090485055 HW version: MP0.900 RF cal date: 2018.03.05 Chip name: MSM8937 Modem board: MSM8917 Security patch: 2018-06-01 Boot Warranty bit: 0 Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM152 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... error (0) please update phone firmware Done with Samsung Tool PRO v.33.8 |
 |
|
09-20-2018, 22:56
| #2 (permalink) |
| Freak Poster Join Date: Oct 2006 Location: Philippines
Posts: 169
Member: 379023 Status: Offline Thanks Meter: 38 | anyone encountered this error pls? just got one today and the same error... UNLOCK INSTRUCTIONS: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Run dialer and type *#0*# (service mode will appear). 3. Connect the phone to UART cable, choose correct COM port in port settings. 4. Press 'Unlock' button. 5. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Read Codes via Server Selected model: SM-J250G Selected port: COM40 Z3X BOX Serial Port Software version: 33.8 Checking Login and Password... OK Ballance: 5 crd. You have 5 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-J250G Android version: 7.1.1 PDA version: J250GDXU2ARF2 CSC version: J250GTNX2ARF2 Phone version: J250GDXU2ARF2 Product code: SM-J250GZSATNX CSC country code: New Zealand CSC sales code: TNX Phone SN: R28K30D1FPL IMEI: 354062090485188 HW version: MP0.900 RF cal date: 2018.03.05 Chip name: MSM8937 Modem board: MSM8917 Security patch: 2018-06-01 Boot Warranty bit: 0 Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM13 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... error (0) please update phone firmware Done with Samsung Tool PRO v.33.8 |
| |
|
10-01-2018, 23:34
| #3 (permalink) |
| No Life Poster  Join Date: Feb 2007
Posts: 3,197
Member: 453916 Status: Offline Sonork: 100.1620840 Thanks Meter: 246  | I have same error on two phone Code:
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-J250G
Selected port: COM2 Communications Port
Software version: 33.8
Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J250G
Android version: 7.1.1
PDA version: J250GDXU2ARF2
CSC version: J250GTNX2ARF2
Phone version: J250GDXU2ARF2
Product code: SM-J250GZKATNX
CSC country code: New Zealand
CSC sales code: TNX
Phone SN: R28K30D2A1N
IMEI: 354062090494206
HW version: MP0.900
RF cal date: 2018.03.05
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2018-06-01
Boot Warranty bit: 0
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM44 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (0)
please update phone firmware
Done with Samsung Tool PRO v.33.8 |
| |
|
10-03-2018, 03:23
| #5 (permalink) | |
| Freak Poster Join Date: Oct 2006 Location: Philippines
Posts: 169
Member: 379023 Status: Offline Thanks Meter: 38 | Quote:
so i dont think so if the problem was about the latest security etc.. i think there was a problem with server of z3x..lol | |
| |
|
| Bookmarks |
| |
|
|
Linear Mode
