KF510 cannot boot anymore

[gwaai]

hi,

I tried unlock a KF510 ... which is not working with direct or code .. so i decide to flash it first...

when i tried to flash, i accidentally touch the REGION section beside WRITE button, set to SGOLD SEC0 or someting like that ... then i press write ..

after flash it ... it cannot turn on anymore, and it cannot be connect anymore ... i tried 3 different UART cables, i tried USB cables, i also tried Octoxxx Boix, Vxgxs Box, MicxxBox, nothing can detect it anymore ....

well, when i connect to program and it asks me to power on, the orange light on box will blink 2 times, but not connect, same similiar result on other boxes ... i opened the phone to check connectors, which is good, cables tested on other phones working well too ...

Battery is charged, measured 3.75V ..

any idea?

5/17/2011 12:45:12 PM > Welcome to LG Infineon SGOLD3 TOOL v3x by NoName®
5/17/2011 12:45:12 PM > Current OS : Windows XP
5/17/2011 12:45:15 PM > Welcome to Sgold3 Module!!
5/17/2011 12:45:28 PM > Disconnected.
5/17/2011 12:45:28 PM > TIP: Please reconnect phone battery / power source.
5/17/2011 12:45:28 PM > Count supported models - 119
5/17/2011 12:45:40 PM > Loading module , please wait...
5/17/2011 12:45:47 PM > PMB8877 Module 2.0 started. SW: Ver 3.4.0.0
5/17/2011 12:45:47 PM > Connecting to KF510 in UART Mode (COM13  ,921600)
5/17/2011 12:46:28 PM > Phone found! (MCU:PMB8877) prebooting...
5/17/2011 12:46:28 PM > Release power button. Booting...
5/17/2011 12:46:37 PM > Reading info...
5/17/2011 12:46:38 PM > Flash ID: 0x0000
5/17/2011 12:46:38 PM > BOOT Stage Finished , sending authority...
5/17/2011 12:46:38 PM > Sending SEC pack...
5/17/2011 12:46:39 PM > Reading eeprom ...
5/17/2011 12:46:41 PM > EEPROM Backup Saved AS:E:\Program Files\Z3X\LG\LGI_SG3\BACKUP\KF510_autobackup_17052011_124641.eep
5/17/2011 12:46:41 PM > Detailed Phone Information:
5/17/2011 12:46:41 PM > Phone Model: KF510           
5/17/2011 12:46:41 PM > Phone Manufacturer: LG Elec. Inc 
5/17/2011 12:46:41 PM > Phone Version: Mar 17 2008
5/17/2011 12:46:41 PM > Phone IMEI : 01149100082666700
5/17/2011 12:46:41 PM > Phone BT Adress : 6A:67:DB:E3:1F:00
5/17/2011 12:46:41 PM > Detailed Codes Information:
5/17/2011 12:46:41 PM > Phone NCK Code : 0000-0000
5/17/2011 12:46:41 PM > Phone NS Code : 0000-0000
5/17/2011 12:46:41 PM > Phone SP Code : 0000-0000
5/17/2011 12:46:41 PM > Phone CP Code : 0000-0000
5/17/2011 12:46:41 PM > Phone SIM Code : 0000-0000
5/17/2011 12:46:41 PM > SimLocks Disabled
5/17/2011 12:46:41 PM > SP Lock Disabled
5/17/2011 12:46:41 PM > CP Lock Disabled
5/17/2011 12:46:41 PM > NS Lock Disabled
5/17/2011 12:46:41 PM > SIM Lock Disabled
5/17/2011 12:46:41 PM > AT Lock Disabled
5/17/2011 12:46:41 PM > SL Config:
5/17/2011 12:46:41 PM > Finished in 3 seconds
5/17/2011 12:47:46 PM > Opening "KF510DAT-01-V10a-CNW-XXX_EN_PT_ES.bin"...
5/17/2011 12:47:46 PM > Writing Firmware...
5/17/2011 12:47:46 PM > Sending SEC pack...
5/17/2011 1:05:31 PM > Writing done!
5/17/2011 1:05:31 PM > Finished in 17 minutes 45 seconds.
5/17/2011 1:05:48 PM > Opening "KF510DAT-01-V10a-CNW-XXX_EN_PT_ES.bin"...
5/17/2011 1:05:48 PM > Writing EEPROM...
5/17/2011 1:05:48 PM > Sending SEC pack...
5/17/2011 1:06:09 PM > Certificate Failed!
5/17/2011 1:06:09 PM > Finished in 20 seconds
5/17/2011 1:06:25 PM > Disconnected.
5/17/2011 1:06:25 PM > TIP: Please reconnect phone battery / power source.
5/17/2011 1:06:27 PM > Program succesfully closed at 5/17/2011 1:06:27 PM

[NoName®]

Hello , it possible you desctroed boot area. If GSMUlti will not help , you need desolder flash chip. Additionaly file KF510DAT-01-V10a-CNW-XXX_EN_PT_ES.bin are seems from Vygis support. If you flash such files phone will not powerup in any case, because Vygis use own stuped crypt format.