KS360 wrong unlock code entered!

[vanhh]

info:

Phone platform:INFINEON
Phone IMEI:3532440327xxxxx00
Phone S/N:3532440327xxxxx00
Phone SW VER.:KS360AT-02-V10h-302-370-NOV-07-2008+0
Phone HW VER.:1.0
Phone LCD Revision:LCD 1.0
Phone Camera Revision:CAM 1.0
Bluetooth Adress:2021a5475b3b
Net Lock Conf:"2","302,370,DDFFFFFF,FFFFFFFF,FF","302,720,DDFFFFFF,FFFFFFFF,FF"
SIM Lock Conf:"2","302,370,DDFFFFFF,FFFFFFFF,FF","302,720,DDFFFFFF,FFFFFFFF,FF"
Battery Voltage:3.8V

Done!

Read unlock:

Loading module , please wait...
PMB8888 Module 1.1 started. SW: Ver 2.2.8.0
Please connect phone , it must be powered off
Booting...   \\.\USB1
Phone found! (MCU:SG3_USB) prebooting...
Flash ID: 000000
*Note in USB mode flash id can be incorrectly read*
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading ...
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\KS360_autobackup_11012011_190502.eep
Analising EEPROM...
Phone IMEI:3532440327xxxxx
Unlock codes:
NCK[0]: 11318571 (UNLOCKED)
TIP: For additional codes , select Read Codes option and  click Unlock button
Finished in 2 seconds
Reading codes...
Sending SEC pack...
Reading ...
Analising EEPROM...
Phone IMEI:3532440327xxxxx
For operation finishing,do next :
1. power phone ON with original SIM
2. type 2945#*71001# to enter unlock menu
3. Enter one of this code(s):
NCK[0]: 11318571 (UNLOCKED)
Finished in 2 seconds

Rebuild SP, IMEI

Repairing IMEI... , phone must be powered on!
Current IMEI:3532440327xxxxx00
Setting up secure mode!
Writing new IMEI:35324403270433
Result is:IMEI WRITE OK

Full flash phone but still don't accept code!
How to fix, pls?

[vanhh]

Opening "KS360AT-00-V10h-ESA-XXX-NOV-07-2008+0.bin"...
Writing Full flash.
Sending SEC pack...
Writing done!
Finished in 14 minutes 6 seconds.

[vanhh]

KS360 don't accept code read from tool.
Tried direct unlock, Read code, Rebuild SP IMEi, Full flash but can't unlock it.

Support team, How to unlock this phone?
Thanks!

[hichman1]

Originally Posted by vanhh

KS360 don't accept code read from tool.
Tried direct unlock, Read code, Rebuild SP IMEi, Full flash but can't unlock it.

Support team, How to unlock this phone?
Thanks!

direct unlock don't work but

read unlock work 10000%

just type 2945#*71001# with sim card accepted

or without sim card

here is my log file :

Welcome to LG Infineon SGOLD3 TOOL v2x by NoName®
Models count: 88
Current OS : Windows XP
Welcome to Sgold3 Module!!
Count supported models - 88
***Disconnected***
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8888 Module 1.1 started. SW: Ver 2.3.0.1
Connecting to KS360 in UART Mode (COM93 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8888) prebooting...
Release power button. Booting...
Reading info...
Flash ID: 0000
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading ...
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\KS360_autobackup_04022 011_191407.eep
Analising EEPROM...
Phone IMEI:3554290Hichman1
Unlock codes:
NCK[0]: 63819752 (LOCKED)
TIP: For additional codes , select Read Codes option and click Unlock button
Finished in 5 seconds
Unlocking...
Sending SEC pack...
Reading EEPROM....
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\KS360_autobackup_04022 011_191420.eep
Analising EEPROM...
Lock MCC+MNC:ےےےےے
SP Lock Cleared
Phone IMEI:355429026Hichman1
SimLock Data Cleared!
Writing EEPROM....
Sending SEC pack...
Unlock done!
Finished in 10 seconds

work 10000% entering code NCK


good luck

B.R


bR

Hichman1