LG 2-3G Tool 9.32 Release. LG V20, LG X Mach - Page 2 - GSM-Forum

andrew_tm · 01-26-2017, 21:28

Quote:

Originally Posted by Software Lab

wow really helpful gift present for ours mr blang. request to you support frp reset via download mode without adb mode.

We support this in LG long time.

--

andrew_tm · 01-26-2017, 21:30

Quote:

Originally Posted by fuentesadalid0

Imei repair is not working properly on h918.either I don't get a port or I fget a "battery to low,change the battery" error

mr blang pls advise

Contact to me in PM.

--

andrew_tm · 01-26-2017, 21:31

Quote:

Originally Posted by RanaBhai

is possible read firmware of supported lg phones by z3x lg tool ????

Yes, if phone not with Android 7.

--

rogeliomalpa · 01-27-2017, 01:24

What could i be doing wrong sir?

LG 2-3G Tool v9.32
supported models: 1440

Mode: Emergency
Model: LS775
Read info...
Model name: LGLS775
Software verion: LS775ZV4
Android verion: 6.0.1
IMEI: xxxxxxxxxxxxxx
Elapsed: 5 secs. --> (v9.32)

Phone mode is DOWNLOAD
Start FRP remove...
Model name: LGLS775
Software verion: LS775ZV4
Android verion: 6.0.1
IMEI: xxxxxxxxxxxxx
Init EXT4 ...
Laf cmd info: send LAF_CMD_READ, retry #1
Laf cmd error: LAF_CMD_READ invalid response.
Error reset locks
Laf cmd error: LAF_CMD_CLOSE invalid response.
Elapsed: 23 secs. --> (v9.32)

Reading timeout, check cable
Error Code: ReadInfo,1,1
Elapsed: 4 secs. --> (v9.32)

Mode: Emergency
Model: LS675
Read info...
Model name: LGLS775
Software verion: LS775ZV4
Android verion: 6.0.1
IMEI: xxxxxxxxxxxxxxx
Elapsed: 4 secs. --> (v9.32)

Phone mode is DOWNLOAD
Start FRP remove...
Model name: LGLS775
Software verion: LS775ZV4
Android verion: 6.0.1
IMEI: xxxxxxxxxxxxxx
Init EXT4 ...
Save EXT4...
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_WRITE, retry #1
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_WRITE, retry #2
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_WRITE, retry #3
Laf cmd error: LAF_CMD_WRITE could not write.
Error reset locks
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_CLOSE, retry #1
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_CLOSE, retry #2
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_CLOSE, retry #3
Laf cmd error: LAF_CMD_CLOSE could not write.

andrew_tm · 01-27-2017, 18:53

Quote:

Originally Posted by rogeliomalpa

What could i be doing wrong sir?

LG 2-3G Tool v9.32
supported models: 1440

Mode: Emergency
Model: LS775
Read info...
Model name: LGLS775
Software verion: LS775ZV4
Android verion: 6.0.1
IMEI: xxxxxxxxxxxxxx
Elapsed: 5 secs. --> (v9.32)

Phone mode is DOWNLOAD
Start FRP remove...
Model name: LGLS775
Software verion: LS775ZV4
Android verion: 6.0.1
IMEI: xxxxxxxxxxxxx
Init EXT4 ...
Laf cmd info: send LAF_CMD_READ, retry #1
Laf cmd error: LAF_CMD_READ invalid response.
Error reset locks
Laf cmd error: LAF_CMD_CLOSE invalid response.
Elapsed: 23 secs. --> (v9.32)

Reading timeout, check cable
Error Code: ReadInfo,1,1
Elapsed: 4 secs. --> (v9.32)

Mode: Emergency
Model: LS675
Read info...
Model name: LGLS775
Software verion: LS775ZV4
Android verion: 6.0.1
IMEI: xxxxxxxxxxxxxxx
Elapsed: 4 secs. --> (v9.32)

Phone mode is DOWNLOAD
Start FRP remove...
Model name: LGLS775
Software verion: LS775ZV4
Android verion: 6.0.1
IMEI: xxxxxxxxxxxxxx
Init EXT4 ...
Save EXT4...
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_WRITE, retry #1
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_WRITE, retry #2
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_WRITE, retry #3
Laf cmd error: LAF_CMD_WRITE could not write.
Error reset locks
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_CLOSE, retry #1
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_CLOSE, retry #2
Laf cmd error: could not open port.
Laf cmd info: send LAF_CMD_CLOSE, retry #3
Laf cmd error: LAF_CMD_CLOSE could not write.

Bad connections or bad driver.

Connect phone direct to mother board USB and not use any hubs.

--

Xaker2012 · 01-27-2017, 20:03

LG H345 Firmware

Quote:

LG 2-3G Tool v9.32
supported models: 1440

Mode: Emergency
Model: H345
Read info...
Model name: LG-H345
Software verion: H34510j
Android verion: 5.1.1
IMEI: 3540---------------
Elapsed: 4 secs. --> (v9.32)

Режим телефону DOWNLOAD
Початок флешування.
Open TOT File : C:\Users\User\Desktop\LGH345AT-00-V10e-TMO-US-JUN-16-2015+0\LGH345AT-00-V10e-TMO-US-JUN-16-2015+0\LGH345AT-00-V10e-TMO-US-JUN-16-2015+0.tot
Модель : LG-H345
Версія ПЗ : H34510e
Час Білду :
Total Files : 42
Model name: LG-H345
Software verion: H34510j
Android verion: 5.1.1
IMEI: 3540------------
Start direct download mode
Write "PrimaryGPT" partition #1 of 42
Write "sbl1" partition #2 of 42
Write "tz" partition #3 of 42
Write "hyp" partition #4 of 42
Write "rpm" partition #5 of 42
Write "aboot" partition #6 of 42
Write "sbl1bak" partition #7 of 42
Write "tzbak" partition #8 of 42
Write "hypbak" partition #9 of 42
Write "rpmbak" partition #10 of 42
Write "abootbak" partition #11 of 42
Write "persist" partition #12 of 42
Write "laf" partition #13 of 42
Write "boot" partition #14 of 42
Write "recovery" partition #15 of 42
Write "sec" partition #16 of 42
Write "factory" partition #17 of 42
Write "modem" partition #18 of 42
Write "system" partition #19 of 42
Write "system" partition #20 of 42
Write "system" partition #21 of 42
Write "system" partition #22 of 42
Write "system" partition #23 of 42
Write "system" partition #24 of 42
Write "system" partition #25 of 42
Write "system" partition #26 of 42
Write "system" partition #27 of 42
Write "system" partition #28 of 42
Write "system" partition #29 of 42
Write "system" partition #30 of 42
Write "system" partition #31 of 42
Write "system" partition #32 of 42
Write "system" partition #33 of 42
Write "system" partition #34 of 42
Write "system" partition #35 of 42
Write "system" partition #36 of 42
Write "system" partition #37 of 42
Write "system" partition #38 of 42
Write "system" partition #39 of 42
Write "system" partition #40 of 42
Write "system" partition #41 of 42
Write "system" partition #42 of 42
Erase "rct" partition
Готово.
Elapsed: 446 secs. --> (v9.32)

mehdan · 01-28-2017, 16:57

not working, impossible to do any operation, even for read information the software crach.

andrew_tm · 01-28-2017, 17:48

Quote:

Originally Posted by mehdan

not working, impossible to do any operation, even for read information the software crach.

Check your card and card driver.
You can send Team viewer id and password to me in PM and I check your problem.

--

martinasa · 01-28-2017, 23:19

Quote:

Originally Posted by haji rahim

Please add support for sprint phones, ls675, ls676, ls450, lg x power, ls775. Add apn option and unlock.

[/UR

LS676 DONE by choosing LS675 !!!!!!!!

LG 2-3G Tool v9.32
supported models: 1440

Mode: Emergency
Model: LS675
Read info...
Model name: LGLS676
Software verion: LS676ZV3
Android verion: 6.0.1
IMEI: 35XXXXXXXXXXXX63
Elapsed: 3 secs. --> (v9.32)

Phone mode is DOWNLOAD
Start FRP remove...
Model name: LGLS676
Software verion: LS676ZV3
Android verion: 6.0.1
IMEI: 35XXXXXXXXXXX63
Init EXT4 ...
Restore data detected!
Save EXT4...
FRP Restore Done!
Elapsed: 6 secs. --> (v9.32)

aquariesirfan · 02-01-2017, 08:55

Quote:

Originally Posted by haji rahim

Please add support for sprint phones, ls675, ls676, ls450, lg x power, ls775. Add apn option and unlock.

[/UR

team kindly add these things waiting from a long time although octopus is doing pls add

Servicesinfocel · 02-01-2017, 19:30

i trying to get update but when i try to download z3x shell not answer
have to unplug my box, z3x shell close and restart again and again
someone ca help

andrew_tm · 02-01-2017, 19:32

Quote:

Originally Posted by Servicesinfocel

i trying to get update but when i try to download z3x shell not answer
have to unplug my box, z3x shell close and restart again and again
someone ca help

Try update in shell (Setting tab) filed db and download after this.

--

Servicesinfocel · 02-01-2017, 19:56

because i remove the software maybe
that write all product is up to date

Servicesinfocel · 02-01-2017, 21:00

i reinstall old version of lg 2-3g Tool and retry to get update but prog i always get not respond and have to close prog by unpluging box
to kill process dont close shell there is other way to get update
i have same trouble for any download

andrew_tm · 02-01-2017, 21:01

Quote:

Originally Posted by Servicesinfocel

i reinstall old version of lg 2-3g Tool and retry to get update but prog i always get not respond and have to close prog by unpluging box
to kill process dont close shell there is other way to get update
i have same trouble for any download

LG 2-3G Tool you can download from Mega ( https://mega.nz/#!7wg2QaKb!tnaz9cc--...ytU4dnFVe0Y3YI ) for fix problem with shell or box make own thread.

--

01-27-2017, 01:24	#19 (permalink)
rogeliomalpa Freak Poster Join Date: May 2015 Location: Mexico Posts: 110 Member: 2398481 Status: Offline Thanks Meter: 16	Ls 775 frp fail What could i be doing wrong sir? LG 2-3G Tool v9.32 supported models: 1440 Mode: Emergency Model: LS775 Read info... Model name: LGLS775 Software verion: LS775ZV4 Android verion: 6.0.1 IMEI: xxxxxxxxxxxxxx Elapsed: 5 secs. --> (v9.32) Phone mode is DOWNLOAD Start FRP remove... Model name: LGLS775 Software verion: LS775ZV4 Android verion: 6.0.1 IMEI: xxxxxxxxxxxxx Init EXT4 ... Laf cmd info: send LAF_CMD_READ, retry #1 Laf cmd error: LAF_CMD_READ invalid response. Error reset locks Laf cmd error: LAF_CMD_CLOSE invalid response. Elapsed: 23 secs. --> (v9.32) Reading timeout, check cable Error Code: ReadInfo,1,1 Elapsed: 4 secs. --> (v9.32) Mode: Emergency Model: LS675 Read info... Model name: LGLS775 Software verion: LS775ZV4 Android verion: 6.0.1 IMEI: xxxxxxxxxxxxxxx Elapsed: 4 secs. --> (v9.32) Phone mode is DOWNLOAD Start FRP remove... Model name: LGLS775 Software verion: LS775ZV4 Android verion: 6.0.1 IMEI: xxxxxxxxxxxxxx Init EXT4 ... Save EXT4... Laf cmd error: could not open port. Laf cmd info: send LAF_CMD_WRITE, retry #1 Laf cmd error: could not open port. Laf cmd info: send LAF_CMD_WRITE, retry #2 Laf cmd error: could not open port. Laf cmd info: send LAF_CMD_WRITE, retry #3 Laf cmd error: LAF_CMD_WRITE could not write. Error reset locks Laf cmd error: could not open port. Laf cmd info: send LAF_CMD_CLOSE, retry #1 Laf cmd error: could not open port. Laf cmd info: send LAF_CMD_CLOSE, retry #2 Laf cmd error: could not open port. Laf cmd info: send LAF_CMD_CLOSE, retry #3 Laf cmd error: LAF_CMD_CLOSE could not write.

02-01-2017, 19:30	#26 (permalink)
Servicesinfocel Major Poster Join Date: Jan 2017 Location: Saint-Georges, Quebec, Canada Posts: 45 Member: 2672718 Status: Offline Thanks Meter: 4	enabled to download i trying to get update but when i try to download z3x shell not answer have to unplug my box, z3x shell close and restart again and again someone ca help

01-28-2017, 16:57	#22 (permalink)
mehdan Junior Member Join Date: Mar 2012 Posts: 2 Member: 1729825 Status: Offline Thanks Meter: 0	not working, impossible to do any operation, even for read information the software crach.

02-01-2017, 19:56	#28 (permalink)
Servicesinfocel Major Poster Join Date: Jan 2017 Location: Saint-Georges, Quebec, Canada Posts: 45 Member: 2672718 Status: Offline Thanks Meter: 4	because i remove the software maybe that write all product is up to date

02-01-2017, 21:00	#29 (permalink)
Servicesinfocel Major Poster Join Date: Jan 2017 Location: Saint-Georges, Quebec, Canada Posts: 45 Member: 2672718 Status: Offline Thanks Meter: 4	i reinstall old version of lg 2-3g Tool and retry to get update but prog i always get not respond and have to close prog by unpluging box to kill process dont close shell there is other way to get update i have same trouble for any download