LG GS290 dead after write EEPROM - GSM-Forum

sashatam · 03-20-2011, 21:06

There was not working touchscreen. I"ve tried to flash with firmware from support, but the screen become yellow. Then I write back my EEPROM and phone is dead now. Now can`t connect with USB mode, only UART. I flash phone with GSMULTI and different firmwares, but phone still dead, even no screen is blinking. Please, team, help to revive phone!

NoName® · 03-21-2011, 12:42

You flashed in UART mode by multi or by z3x ?

sashatam · 03-21-2011, 15:42

I flashed by GSMULTI and Z3x Infineon tool same firmwares, but phone still DEAD and does not recognize USB mode

NoName® · 03-22-2011, 02:16

What firmware are you flashed ?

sashatam · 03-22-2011, 09:42

GS290AT-00-V10d-CIS-XXX-MAR-11-2010+0.BIN
ROM_GS290AT-00-V10a-724-XXX-APR-22-2010+0.bin
GS290AT-00-V10b-AME-XXX-APR-26-2010+0.bin

sashatam · 03-23-2011, 13:04

My problem not solved. Where can I find full flash or eeprom to revive my phone?

sashatam · 03-27-2011, 19:26

I flashed phone like GS390, flashing was ok but problem not solved. Need help from Z3X team!

NoName® · 03-28-2011, 19:29

try to flash following file http://rapidshare.com/files/454822189/ReadFw.zip

sashatam · 03-29-2011, 13:04

Not power on. Filesize is 264 Mb like most firmware files of gs290. Need full or backup from another phone I guess.

NoName® · 03-29-2011, 13:57

Quote:

Originally Posted by sashatam

Not power on. Filesize is 264 Mb like most firmware files of gs290. Need full or backup from another phone I guess.

Thats are backup from working phone , including eep/fs ans other pages not active in factory files. And also before yelling that something wrong tell paoles how you killed phone ;-) Try to flash by latest release. Meybe it help you.

sashatam · 03-29-2011, 15:00

I never told that something is wrong. Im only trying to revive my phone killed by my hands and your soft

When I open this backup file, it indicates like SG3_CODE0, but not SG3_FULL. So, what file is SG3_FULL ? Where I can find it? Or, what file this function for?

kariakala · 03-29-2011, 17:02

Quote:

Originally Posted by sashatam

I never told that something is wrong. Im only trying to revive my phone killed by my hands and your soft

When I open this backup file, it indicates like SG3_CODE0, but not SG3_FULL. So, what file is SG3_FULL ? Where I can find it? Or, what file this function for?

check the path like

C:\Program Files\Z3X\LG\LGI_SG3\FULL

C:\Program Files\Z3X\LG\LGI_SG3\

sashatam · 03-29-2011, 17:14

These folders are empty

. Only backup file GS290_autobackup_17032011_185245.eep and many other in this path C:\Program Files\Z3X\LG\LGI_SG3\BACKUP .

kariakala · 03-29-2011, 17:18

Quote:

Originally Posted by sashatam

These folders are empty

. Only backup file GS290_autobackup_17032011_185245.eep and many other in this path C:\Program Files\Z3X\LG\LGI_SG3\BACKUP .

if you had not did any back up then you can not find any file in back up folder

NoName® · 03-29-2011, 20:13

Quote:

Originally Posted by sashatam

I never told that something is wrong. Im only trying to revive my phone killed by my hands and your soft

When I open this backup file, it indicates like SG3_CODE0, but not SG3_FULL. So, what file is SG3_FULL ? Where I can find it? Or, what file this function for?

You flashed this file of not , what results , whare is a logs ?

03-20-2011, 21:06	#1 (permalink)
sashatam Junior Member Join Date: May 2006 Posts: 35 Member: 270621 Status: Offline Thanks Meter: 4	LG GS290 dead after write EEPROM There was not working touchscreen. I"ve tried to flash with firmware from support, but the screen become yellow. Then I write back my EEPROM and phone is dead now. Now can`t connect with USB mode, only UART. I flash phone with GSMULTI and different firmwares, but phone still dead, even no screen is blinking. Please, team, help to revive phone!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eeprom reading	KLImax	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	09-22-2011 15:55
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
Upload / Download eeprom program for 51xx/61xx	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-07-1999 14:03
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

03-21-2011, 12:42	#2 (permalink)
NoName® Product Supporter Join Date: Mar 2005 Location: China Posts: 3,338 Member: 129885 Status: Offline Sonork: 100:1603514 Thanks Meter: 6,202	You flashed in UART mode by multi or by z3x ?

03-21-2011, 15:42	#3 (permalink)
sashatam Junior Member Join Date: May 2006 Posts: 35 Member: 270621 Status: Offline Thanks Meter: 4	I flashed by GSMULTI and Z3x Infineon tool same firmwares, but phone still DEAD and does not recognize USB mode

03-22-2011, 02:16	#4 (permalink)
NoName® Product Supporter Join Date: Mar 2005 Location: China Posts: 3,338 Member: 129885 Status: Offline Sonork: 100:1603514 Thanks Meter: 6,202	What firmware are you flashed ?

03-22-2011, 09:42	#5 (permalink)
sashatam Junior Member Join Date: May 2006 Posts: 35 Member: 270621 Status: Offline Thanks Meter: 4	GS290AT-00-V10d-CIS-XXX-MAR-11-2010+0.BIN ROM_GS290AT-00-V10a-724-XXX-APR-22-2010+0.bin GS290AT-00-V10b-AME-XXX-APR-26-2010+0.bin

03-23-2011, 13:04	#6 (permalink)
sashatam Junior Member Join Date: May 2006 Posts: 35 Member: 270621 Status: Offline Thanks Meter: 4	My problem not solved. Where can I find full flash or eeprom to revive my phone?

03-27-2011, 19:26	#7 (permalink)
sashatam Junior Member Join Date: May 2006 Posts: 35 Member: 270621 Status: Offline Thanks Meter: 4	I flashed phone like GS390, flashing was ok but problem not solved. Need help from Z3X team!

03-28-2011, 19:29	#8 (permalink)
NoName® Product Supporter Join Date: Mar 2005 Location: China Posts: 3,338 Member: 129885 Status: Offline Sonork: 100:1603514 Thanks Meter: 6,202	try to flash following file http://rapidshare.com/files/454822189/ReadFw.zip

03-29-2011, 13:04	#9 (permalink)
sashatam Junior Member Join Date: May 2006 Posts: 35 Member: 270621 Status: Offline Thanks Meter: 4	Not power on. Filesize is 264 Mb like most firmware files of gs290. Need full or backup from another phone I guess.

03-29-2011, 15:00	#11 (permalink)
sashatam Junior Member Join Date: May 2006 Posts: 35 Member: 270621 Status: Offline Thanks Meter: 4	I never told that something is wrong. Im only trying to revive my phone killed by my hands and your soft When I open this backup file, it indicates like SG3_CODE0, but not SG3_FULL. So, what file is SG3_FULL ? Where I can find it? Or, what file this function for?

03-29-2011, 17:14	#13 (permalink)
sashatam Junior Member Join Date: May 2006 Posts: 35 Member: 270621 Status: Offline Thanks Meter: 4	These folders are empty . Only backup file GS290_autobackup_17032011_185245.eep and many other in this path C:\Program Files\Z3X\LG\LGI_SG3\BACKUP .