LG GS290 Unlock !!! - GSM-Forum

Umbabaraumba · 07-26-2010, 18:10

Please tell me,possible unlock LG GS290 via USB,because TP on board is broken !!!
THANKS !!!

godwin · 07-26-2010, 18:42

Quote:

Originally Posted by Umbabaraumba

Please tell me,possible unlock LG GS290 via USB,because TP on board is broken !!!
THANKS !!!

Is not easy to unolcked this phone using usb but i have one on my hand so am going to try it with usb and i well share it to u

mrx3net · 07-26-2010, 18:55

if tp broken you can use gw300 cable
no way by usb at this time

Umbabaraumba · 07-26-2010, 18:59

Quote:

Originally Posted by mrx3net

if tp broken you can use gw300 cable
no way by usb at this time

Give me scheme for gw300 bable !!!

mrx3net · 07-26-2010, 19:06

Umbabaraumba · 07-27-2010, 12:18

Quote:

Originally Posted by mrx3net

Thanks Brother - I tested this pinout - 10000% working !!

Welcome to LG Infineon SGOLD3 TOOL v2x by NoName®
Models count: 73
Current OS : Windows XP
Welcome to Sgold3 Module!!
Count supported models - 73
Disconnected.
Loading module , please wait...
PMB8877 Module 1.2 started. SW: Ver 2.2.7.2
Connecting to GS290 in UART Mode (COM3 ,230400)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8877) prebooting...
Release power button. Booting...
Reading info...
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading EEPROM...
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\GS290_autobackup_27072 010_135604.eep
Analising EEPROM...
Phone IMEI:35928903xxxxxxx
Unlock codes:
NCK[0]: 6957882969412150 (LOCKED)
Finished in 5 seconds

lader · 09-07-2010, 00:25

yes a have unlocked gs290 with modified cable tested .........ok

Phone type : LG-GS290
Phone IMEI : 359289-03-255352-7

Connect phone to cable-phone must be ON, if phone can't be powered connect it OFF and press Power ON and keep it pressed until
bootloader will start ... OK
----------------------------------------------------------
Loading primary loader ... OK
Loading secondary loader ... OK
Changing baudrate ... OK
Setting bus ... OK
Loading certificate ... OK
----------------------------------------------------------
Reading phone info ... OK
----------------------------------------------------------
Reading sim unlock code... OK
Found sim unlock codes :
NCK : 4716 1843 6283 3533
NSCK : 9223 1612 7349 3137
SPCK : 3402 4645 3468 7199
CCK : 5174 8509 0300 8073
SIM : 4761 1109 5415 2829
======== Process completed ========
Operation time - 00:01
----------------------------------------------------------
For operation finishing,do next :
- power phone ON without SIM
- type 2945#*290# to enter unlock menu
- enter needed unlock code

janda · 10-01-2010, 09:16

Phone succesfully unlocked via IPmart GW300 UART USB=>RJ45 cable

Code:

Welcome to LG Infineon SGOLD3 TOOL v2x by NoName®
Models count: 80
Current OS : Windows XP
Welcome to Sgold3 Module!!
Count supported models - 80
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8877 Module 1.21 started. SW: Ver 2.2.8.0
Connecting to GS290 in UART Mode (COM3  ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8877) prebooting...
Release power button. Booting...
Reading info...
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading EEPROM...
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\GS290_autobackup_01102010_100640.eep
Analising EEPROM...
Phone IMEI:35354304******
Unlock codes:
NCK[0]: 1085548501020993 (LOCKED)
TIP: For additional codes , select Read Codes option and  click Unlock button
Finished in 4 seconds

dimityr.milev · 12-10-2010, 09:29

if you not have cable , use internal test point

Done!
Loading module , please wait...
PMB8877 Module 1.21 started. SW: Ver 2.2.8.0
Please connect phone , it must be powered off
Timed OUT...
BOOT Failed
***Disconnected***
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8877 Module 1.21 started. SW: Ver 2.2.8.0
Please connect phone , it must be powered off
Timed OUT...
BOOT Failed
***Disconnected***
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8877 Module 1.21 started. SW: Ver 2.2.8.0
Connecting to GS290 in UART Mode (COM203 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8877) prebooting...
Release power button. Booting...
Reading info...
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading EEPROM...
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\GS290_autobackup_10122 010_100546.eep
Analising EEPROM...
Phone IMEI:354106042xxxx
Unlock codes:
NCK[0]: 6752264198354553 (LOCKED)
TIP: For additional codes , select Read Codes option and click Unlock button
Finished in 3 seconds
Reading EEPROM
Sending SEC pack...
Analising EEPROM...
Phone IMEI:3541060428xxxxxxx
For operation finishing,do next :
1. power phone ON with original SIM
2. type 2945#*XXX# ,where XXX are model digits to enter unlock menu
3. Enter one of this code(s):
NCK[0]: 6752264198354553 (LOCKED)
NCK[1]: 1280223089014047 (NS)
NCK[2]: 2494953036067591 (SP)
NCK[3]: 7911812717827084 (CP)
Finished in 2 seconds

sundayhelp · 12-19-2010, 21:33

I have unlock with usb with z3x
Loading module , please wait...
PMB8877 Module 1.21 started. SW: Ver 2.2.8.0
Please connect phone , it must be powered off
Booting... \\.\USB1
Phone found! (MCU:SG3_USB) prebooting...
Flash ID: 00FF00
*Note in USB mode flash id can be incorrectly read*
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading EEPROM...
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\GS290_autobackup_19122 010_202754.eep
Analising EEPROM...
Phone IMEI:354106043767539

Monika_G · 12-28-2010, 11:00

Hi sundayhelp, can you help?
me i need nck for my lg GS290

Oxegen · 12-28-2010, 11:12

must comparable with gw300 cable u can make/buy it from anywhere and for made schematics on forum

Monika_G · 12-30-2010, 12:03

so wich kind of cable i need for Lg gs290

Oxegen · 01-01-2011, 06:01

Quote:

Originally Posted by Monika_G

so wich kind of cable i need for Lg gs290

did u know how many easy to use search button?

sundayhelp · 01-04-2011, 17:35

Quote:

Originally Posted by Monika_G

Hi sundayhelp, can you help?
me i need nck for my lg GS290

power on the phone ,use usb conect to computer ,wait for 10min.than use z3x box to read. choose the port can read the information of the phone.than quickly reconect the bettry and usb.you will see the code

07-26-2010, 18:10	#1 (permalink)
Umbabaraumba No Life Poster Join Date: May 2005 Location: Bulgaria Age: 49 Posts: 1,801 Member: 142632 Status: Offline Sonork: 100.1589012 Thanks Meter: 459	LG GS290 Unlock !!! Please tell me,possible unlock LG GS290 via USB,because TP on board is broken !!! THANKS !!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	03-23-2015 14:21
FAQ about unlock n0kia	man0n	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:06

07-26-2010, 18:55	#3 (permalink)
mrx3net No Life Poster Join Date: Apr 2009 Location: Mor Posts: 1,507 Member: 1006514 Status: Offline Thanks Meter: 640	if tp broken you can use gw300 cable no way by usb at this time

07-26-2010, 19:06	#5 (permalink)
mrx3net No Life Poster Join Date: Apr 2009 Location: Mor Posts: 1,507 Member: 1006514 Status: Offline Thanks Meter: 640

09-07-2010, 00:25	#7 (permalink)
lader No Life Poster Join Date: Dec 2004 Age: 50 Posts: 1,185 Member: 95476 Status: Offline Thanks Meter: 185	yes a have unlocked gs290 with modified cable tested .........ok Phone type : LG-GS290 Phone IMEI : 359289-03-255352-7 Connect phone to cable-phone must be ON, if phone can't be powered connect it OFF and press Power ON and keep it pressed until bootloader will start ... OK ---------------------------------------------------------- Loading primary loader ... OK Loading secondary loader ... OK Changing baudrate ... OK Setting bus ... OK Loading certificate ... OK ---------------------------------------------------------- Reading phone info ... OK ---------------------------------------------------------- Reading sim unlock code... OK Found sim unlock codes : NCK : 4716 1843 6283 3533 NSCK : 9223 1612 7349 3137 SPCK : 3402 4645 3468 7199 CCK : 5174 8509 0300 8073 SIM : 4761 1109 5415 2829 ======== Process completed ======== Operation time - 00:01 ---------------------------------------------------------- For operation finishing,do next : - power phone ON without SIM - type 2945#*290# to enter unlock menu - enter needed unlock code

12-19-2010, 21:33	#10 (permalink)
sundayhelp Junior Member Join Date: Oct 2010 Posts: 29 Member: 1432089 Status: Offline Thanks Meter: 3	I have unlock with usb with z3x Loading module , please wait... PMB8877 Module 1.21 started. SW: Ver 2.2.8.0 Please connect phone , it must be powered off Booting... \\.\USB1 Phone found! (MCU:SG3_USB) prebooting... Flash ID: 00FF00 Note in USB mode flash id can be incorrectly read BOOT Stage Finished , sending authority... Sending SEC pack... Reading EEPROM... Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\GS290_autobackup_19122 010_202754.eep Analising EEPROM... Phone IMEI:354106043767539

12-28-2010, 11:00	#11 (permalink)
Monika_G Junior Member Join Date: Dec 2010 Posts: 10 Member: 1472183 Status: Offline Sonork: 45485 Thanks Meter: 0	Hi sundayhelp, can you help? me i need nck for my lg GS290

12-28-2010, 11:12	#12 (permalink)
Oxegen No Life Poster Join Date: Nov 2010 Posts: 548 Member: 1439406 Status: Offline Thanks Meter: 88	must comparable with gw300 cable u can make/buy it from anywhere and for made schematics on forum

12-30-2010, 12:03	#13 (permalink)
Monika_G Junior Member Join Date: Dec 2010 Posts: 10 Member: 1472183 Status: Offline Sonork: 45485 Thanks Meter: 0	so wich kind of cable i need for Lg gs290