Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1043 - GSM-Forum

zvrrr · 02-17-2016, 08:50

Operation: Unlock
Selected model: SM-G350
Software version: 20.5

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G350
Android version: 4.2.2
Product code:
Phone version: G350XXU0ANG4
PDA version: G350XXU0ANI1
CSC version: G350TTR0ANI1
CSC country code: AUSTRIA
CSC sales code: TRG
HW version: MP 0.500
Phone S/N: RV1DB0KB65W
Modem board:
RF cal date: 20131104
IMEI: 358495050499813
Checking Super user right... true
Reading data from phone... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool v.20.5

sebY7676 · 02-17-2016, 11:46

i9100 repaired done

Code:

Selected model: I9100
Selected port: COM10 Z3X BOX Serial Port
Selected port speed: 115200
Waiting ADB device... OK
Reading phone info...
Model: GT-I9100
Android version: 2.3.5
Product code: Unknown
Phone version: Unknown
PDA version: I9100XWKI8
CSC version: I9100H3GKI2
IMEI: Unknown
Phone S/N: Unknown
Checking Super user right... true
Reseting EFS... OK
Rebooting phone... OK
Waiting ADB device... OK
Reading phone info...
Model: GT-I9100
Android version: 2.3.5
Product code: Not Active
Phone version: I9100NEKI2
PDA version: I9100XWKI8
CSC version: Unknown
IMEI: 004999010640000
Phone S/N: 00000000000
Checking Super user right... true
Disabling Factory mode... OK
Reading nv data... OK
Checking magic... OK
Running zTool, please wait... OK
Writing nv data... OK
Rebooting phone... OK
Repair done

sebY7676 · 02-17-2016, 11:47

i9300 unlocked done

Code:

Waiting ADB device... OK
Reading phone info...
Model: GT-I9300
Android version: 4.3
Product code: GT-I9300MBDH3G
Phone version: I9300NEUGND1
PDA version: I9300XXUGND3
CSC version: I9300H3GGND1
CSC country code: UK
CSC sales code: H3G
HW version: MP 1.100
Phone S/N: RF1C79MDNZW
Modem board: 
RF cal date: 2012.7.28
IMEI: 3539210501xxxxx
Checking Super user right... true
Reading nv data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 0
Calculating... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

sajid11 · 02-17-2016, 11:56

Operation: Reset FRP/React/EE
Selected model: SM-G531F
Software version: 24.3

Searching Samsung USB Flash Interface... detected COM40
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... not supported
Searching EE lock... OK
Erasing EE lock... OK
Reset done

Done with Samsung Tool PRO v.24.3

lovist2 · 02-17-2016, 14:47

SAMSUNG N7100 IMEI AND NETWORK SUCCESSFULLY REPAIRED WITH Z3x BOX

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity and make backup before.
8. Press 'Disable Factory Mode' or 'Patch Sertificate' if needed.

Operation: Patch Certificate
Selected model: GT-N7100
Software version: 24.3

Waiting ADB device... OK
Reading phone info...
Model: GT-N7100
Android version: 4.4.2
Product code: Not Active
Phone version: N7100XXUFND3
PDA version: N7100XXUFND4
CSC version: N7100OJVFND3
CSC country code: UAE
CSC sales code: XSG
HW version: Unknown
Phone S/N: RF1DCOA794F
Modem board: XMM6262
RF cal date: Unknown
IMEI: 35935905XXXXXXX
Checking Super user right... true
Reading modem... OK
Patching modem... OK
Writing modem... OK
Reading kernel... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.24.3

jjosef · 02-17-2016, 18:30

unlock g925f liop5.1.1

Firs root for :CF-Auto-Root-zerolte
and unlock for y3x box:

ekání na ADB zažízení... OK
Čtení informací o telefonu...
Model: SM-G925F
Verze androidu: 5.1.1
Kód produktu: SM-G925FZKA3IE
Verze telefonu: G925FXXU3QOJ1
Verze PDA: G925FXXS3COK5
CSC verze: G925F3IE3COJ1
CSC country code: Ireland
CSC sales code: 3IE
HW version: MP 0.700
Seriové číslo telefonu: R58GA0V1X2J
Modem board: SHANNON333
RF cal date: 20151009
IMEI:
Kontrola práv Super uživatele... správné
Initialization AT RIL... OK
Check version... OK
Initializating zTool... OK
Spouštění zTool, prosím čekejte... OK
Čtení nv dat... OK
Checking NV data... OK
Vypočítávání... OK
Zapisování nv dat... OK
Restartování telefonu... OK
Odemčení hotové

Done with Samsung Tool PRO v.24.3

http://ulozto.cz/xrsYmVDP/cf-auto-root-zerolte-zip

jjosef · 02-17-2016, 18:59

unlock g925f liop5.1.1

Firs root for :CF-Auto-Root-zerolte
and unlock for y3x box:

ekání na ADB zažízení... OK
Čtení informací o telefonu...
Model: SM-G925F
Verze androidu: 5.1.1
Kód produktu: SM-G925FZKA3IE
Verze telefonu: G925FXXU3QOJ1
Verze PDA: G925FXXS3COK5
CSC verze: G925F3IE3COJ1
CSC country code: Ireland
CSC sales code: 3IE
HW version: MP 0.700
Seriové číslo telefonu: R58GA0V1X2J
Modem board: SHANNON333
RF cal date: 20151009
IMEI:
Kontrola práv Super uživatele... správné
Initialization AT RIL... OK
Check version... OK
Initializating zTool... OK
Spouštění zTool, prosím čekejte... OK
Čtení nv dat... OK
Checking NV data... OK
Vypočítávání... OK
Zapisování nv dat... OK
Restartování telefonu... OK
Odemčení hotové

Done with Samsung Tool PRO v.24.3

http://ulozto.cz/xrsYmVDP/cf-auto-root-zerolte-zip

miguelstorres · 02-18-2016, 06:44

[ 2/17/2016 1:22:00 PM ] Operation: Unlock SPRNT
[ 2/17/2016 1:22:00 PM ] Selected model: SM-N910P
[ 2/17/2016 1:22:00 PM ] Selected port: COM24 SAMSUNG Mobile USB Serial Port
[ 2/17/2016 1:22:00 PM ] Software version: 24.3
[ 2/17/2016 1:22:00 PM ]
[ 2/17/2016 1:22:00 PM ] Waiting ADB device...
[ 2/17/2016 1:22:00 PM ] Please, allow USB debugging on phone... OK
[ 2/17/2016 1:22:00 PM ] Reading phone info...
[ 2/17/2016 1:22:00 PM ] Model: SM-N910P
[ 2/17/2016 1:22:00 PM ] Android version: 5.1.1
[ 2/17/2016 1:22:00 PM ] Product code: Not Active
[ 2/17/2016 1:22:00 PM ] Phone version: N910PVPS4COK1
[ 2/17/2016 1:22:00 PM ] PDA version: N910PVPS4COK1
[ 2/17/2016 1:22:00 PM ] CSC version: N910PSPT4COK1
[ 2/17/2016 1:22:00 PM ] CSC country code: USA
[ 2/17/2016 1:22:00 PM ] CSC sales code: SPR
[ 2/17/2016 1:22:00 PM ] HW version: N910P.05
[ 2/17/2016 1:22:00 PM ] Phone S/N: 00000000000
[ 2/17/2016 1:22:00 PM ] Modem board: MDM9625M
[ 2/17/2016 1:22:00 PM ] RF cal date: 2014.11.10
[ 2/17/2016 1:22:00 PM ] IMEI:
[ 2/17/2016 1:22:00 PM ] Initialization AT RIL... OK
[ 2/17/2016 1:22:00 PM ] Unlocking... OK
[ 2/17/2016 1:22:00 PM ] Rebooting phone... OK
[ 2/17/2016 1:23:00 PM ] Unlock done
[ 2/17/2016 1:23:00 PM ]

miguelstorres · 02-18-2016, 06:47

2/17/2016 11:52:00 AM ] Operation: Unlock
[ 2/17/2016 11:52:00 AM ] Selected model: SM-N910P
[ 2/17/2016 11:52:00 AM ] Selected port: COM24 SAMSUNG Mobile USB Serial Port
[ 2/17/2016 11:52:00 AM ] Software version: 24.3
[ 2/17/2016 11:52:00 AM ]
[ 2/17/2016 11:52:00 AM ] Reading phone info...
[ 2/17/2016 11:52:00 AM ] Reading IMEI... OK
[ 2/17/2016 11:52:00 AM ] IMEI: 990004727343034
[ 2/17/2016 11:52:00 AM ] Unlocking... OK
[ 2/17/2016 11:52:00 AM ] Reseting... OK
[ 2/17/2016 11:52:00 AM ] Unlock done
[ 2/17/2016 11:52:00 AM ]

miguelstorres · 02-18-2016, 06:48

2/17/2016 11:14:00 AM ] Operation: Unlock SPRNT
[ 2/17/2016 11:14:00 AM ] Selected model: SM-N920P
[ 2/17/2016 11:14:00 AM ] Software version: 24.3
[ 2/17/2016 11:14:00 AM ]
[ 2/17/2016 11:14:00 AM ] Waiting ADB device...
[ 2/17/2016 11:14:00 AM ] Please, allow USB debugging on phone... OK
[ 2/17/2016 11:14:00 AM ] Reading phone info...
[ 2/17/2016 11:14:00 AM ] Model: SM-N920P
[ 2/17/2016 11:14:00 AM ] Android version: 5.1.1
[ 2/17/2016 11:14:00 AM ] Product code: Not Active
[ 2/17/2016 11:14:00 AM ] Phone version: N920PVPS2AOK3
[ 2/17/2016 11:14:00 AM ] PDA version: N920PVPS2AOK3
[ 2/17/2016 11:14:00 AM ] CSC version: N920PSPT2AOK3
[ 2/17/2016 11:14:00 AM ] CSC country code: USA
[ 2/17/2016 11:14:00 AM ] CSC sales code: SPR
[ 2/17/2016 11:14:00 AM ] HW version: N920P.03
[ 2/17/2016 11:14:00 AM ] Phone S/N: 00000000000
[ 2/17/2016 11:14:00 AM ] Modem board: MDM9635M
[ 2/17/2016 11:14:00 AM ] RF cal date: 2015.07.27
[ 2/17/2016 11:14:00 AM ] IMEI:
[ 2/17/2016 11:14:00 AM ] Initialization AT RIL... OK
[ 2/17/2016 11:14:00 AM ] Unlocking... OK
[ 2/17/2016 11:14:00 AM ] Rebooting phone... OK
[ 2/17/2016 11:14:00 AM ] Unlock done
[ 2/17/2016 11:14:00 AM ]

ishtiyaque_24 · 02-18-2016, 09:46

<a href='http://postimg.org/image/s08i02e0b/' target='_blank'><img src='http://s9.postimg.org/s08i02e0b/g920i.jpg' border='0' alt="g920i" /></a>

g920i unlock done with z3x

zvrrr · 02-18-2016, 12:04

Operation: Unlock
Selected model: GT-N7000
Software version: 20.5

Waiting ADB device... OK
Reading phone info...
Model: GT-N7000
Android version: 4.1.2
Product code: GT-N7000RWATCL
Phone version: N7000BOLT1
PDA version: N7000XXLTA
CSC version: N7000MAXLT5
CSC country code: AUSTRIA
CSC sales code: MAX
HW version: MP 0.700
Phone S/N: RV1C32Q862W
Modem board:
RF cal date: 2012.4.9
IMEI: 359548049850097
Checking Super user right... true
Reading nv data... OK
Checking magic... OK
Unlocking... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool v.20.5

rehansk8879 · 02-18-2016, 15:00

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. Choose flash option if needed:
-'Re-write NV' - Warning! This option will erase all calibration data!
-'Single file firmware' - if you have *.pac firmware
3. Press 'Flash' button.
4. Connect phone in flash mode (Press 'OK' button (Centre of navigation buttons module) and connect USB cable).

Operation: Flash
Selected model: SM-B313E
Software version: 24.3

Waiting phone... detected COM6
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Saved to C:\Program Files\Z3X\Samsung\SamsungToolPRO\backup\NV\nvitem_ SM-B313E_18-2-2016_19-10-3.bin
Sending SSBOOT... OK
Sending PS... OK
Sending CSC... OK
Erasing FLASH... OK
Flashing done (time - 00:03:45)

Done with Samsung Tool PRO v.24.3

rehansk8879 · 02-18-2016, 18:37

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on phone in download mode (turn off phone, press vol.down + home + power).
5. Connect phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-G350E
Software version: 24.3

File analysis... OK
Total file size: 0x39FABF64 (927 Mb)
Searching USB Flash Interface... detected COM7
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending spl.img... OK
Sending sboot.bin... OK
Sending sboot2.bin... OK
Sending param.lfs... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending SPRDCP.img... OK
Sending SPRDDSP.img... OK
Sending nvitem.bin... OK
Sending cache.img... OK
Sending hidden.img... OK
Flashing done (time - 00:04:38)

Done with Samsung Tool PRO v.24.3

grmcrkrs · 02-18-2016, 20:01

Operation: Unlock
Selected model: SM-N900T
Selected port: COM160 SAMSUNG Mobile USB Serial Port
Software version: 24.3

Reading phone info...
Reading IMEI... OK
IMEI: 357507050047664
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.24.3

02-17-2016, 11:56	#15634 (permalink)
sajid11 Freak Poster Join Date: Feb 2008 Location: royal mobiles kotla Posts: 275 Member: 714116 Status: Offline Thanks Meter: 48	FRP reset done Operation: Reset FRP/React/EE Selected model: SM-G531F Software version: 24.3 Searching Samsung USB Flash Interface... detected COM40 Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP... OK Searching Reactivation lock... not supported Searching EE lock... OK Erasing EE lock... OK Reset done Done with Samsung Tool PRO v.24.3

02-17-2016, 18:30	#15636 (permalink)
jjosef Freak Poster Join Date: Mar 2004 Location: Czech republic Age: 54 Posts: 451 Member: 56634 Status: Offline Thanks Meter: 71	g925f unlock ok unlock g925f liop5.1.1 Firs root for :CF-Auto-Root-zerolte and unlock for y3x box: ekání na ADB zažízení... OK Čtení informací o telefonu... Model: SM-G925F Verze androidu: 5.1.1 Kód produktu: SM-G925FZKA3IE Verze telefonu: G925FXXU3QOJ1 Verze PDA: G925FXXS3COK5 CSC verze: G925F3IE3COJ1 CSC country code: Ireland CSC sales code: 3IE HW version: MP 0.700 Seriové číslo telefonu: R58GA0V1X2J Modem board: SHANNON333 RF cal date: 20151009 IMEI: Kontrola práv Super uživatele... správné Initialization AT RIL... OK Check version... OK Initializating zTool... OK Spouštění zTool, prosím čekejte... OK Čtení nv dat... OK Checking NV data... OK Vypočítávání... OK Zapisování nv dat... OK Restartování telefonu... OK Odemčení hotové Done with Samsung Tool PRO v.24.3 http://ulozto.cz/xrsYmVDP/cf-auto-root-zerolte-zip

02-17-2016, 18:59	#15637 (permalink)
jjosef Freak Poster Join Date: Mar 2004 Location: Czech republic Age: 54 Posts: 451 Member: 56634 Status: Offline Thanks Meter: 71	g925f unlock ok unlock g925f liop5.1.1 Firs root for :CF-Auto-Root-zerolte and unlock for y3x box: ekání na ADB zažízení... OK Čtení informací o telefonu... Model: SM-G925F Verze androidu: 5.1.1 Kód produktu: SM-G925FZKA3IE Verze telefonu: G925FXXU3QOJ1 Verze PDA: G925FXXS3COK5 CSC verze: G925F3IE3COJ1 CSC country code: Ireland CSC sales code: 3IE HW version: MP 0.700 Seriové číslo telefonu: R58GA0V1X2J Modem board: SHANNON333 RF cal date: 20151009 IMEI: Kontrola práv Super uživatele... správné Initialization AT RIL... OK Check version... OK Initializating zTool... OK Spouštění zTool, prosím čekejte... OK Čtení nv dat... OK Checking NV data... OK Vypočítávání... OK Zapisování nv dat... OK Restartování telefonu... OK Odemčení hotové Done with Samsung Tool PRO v.24.3 http://ulozto.cz/xrsYmVDP/cf-auto-root-zerolte-zip

02-17-2016, 08:50	#15631 (permalink)
zvrrr Freak Poster Join Date: Aug 2013 Posts: 409 Member: 1995502 Status: Offline Thanks Meter: 139	Operation: Unlock Selected model: SM-G350 Software version: 20.5 Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G350 Android version: 4.2.2 Product code: Phone version: G350XXU0ANG4 PDA version: G350XXU0ANI1 CSC version: G350TTR0ANI1 CSC country code: AUSTRIA CSC sales code: TRG HW version: MP 0.500 Phone S/N: RV1DB0KB65W Modem board: RF cal date: 20131104 IMEI: 358495050499813 Checking Super user right... true Reading data from phone... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool v.20.5

02-17-2016, 14:47	#15635 (permalink)
lovist2 Freak Poster Join Date: Aug 2008 Location: Cote d'Ivoire Posts: 275 Member: 841640 Status: Offline Thanks Meter: 86	SAMSUNG N7100 IMEI AND NETWORK SUCCESSFULLY REPAIRED WITH Z3x BOX REPAIR INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Fill values what you need to repair. 6. Press 'Repair' button. 7. Press 'Reset EFS' if you need to reset it. Be carefully, do not perform this without necessity and make backup before. 8. Press 'Disable Factory Mode' or 'Patch Sertificate' if needed. Operation: Patch Certificate Selected model: GT-N7100 Software version: 24.3 Waiting ADB device... OK Reading phone info... Model: GT-N7100 Android version: 4.4.2 Product code: Not Active Phone version: N7100XXUFND3 PDA version: N7100XXUFND4 CSC version: N7100OJVFND3 CSC country code: UAE CSC sales code: XSG HW version: Unknown Phone S/N: RF1DCOA794F Modem board: XMM6262 RF cal date: Unknown IMEI: 35935905XXXXXXX Checking Super user right... true Reading modem... OK Patching modem... OK Writing modem... OK Reading kernel... OK Rebooting phone... OK Patching CERT check... done Done with Samsung Tool PRO v.24.3

02-18-2016, 09:46	#15641 (permalink)
ishtiyaque_24 Freak Poster Join Date: Oct 2010 Location: indore Posts: 352 Member: 1409652 Status: Offline Sonork: 100.1670588 Thanks Meter: 76	<a href='http://postimg.org/image/s08i02e0b/' target='_blank'><img src='http://s9.postimg.org/s08i02e0b/g920i.jpg' border='0' alt="g920i" /></a> g920i unlock done with z3x

02-18-2016, 12:04	#15642 (permalink)
zvrrr Freak Poster Join Date: Aug 2013 Posts: 409 Member: 1995502 Status: Offline Thanks Meter: 139	Operation: Unlock Selected model: GT-N7000 Software version: 20.5 Waiting ADB device... OK Reading phone info... Model: GT-N7000 Android version: 4.1.2 Product code: GT-N7000RWATCL Phone version: N7000BOLT1 PDA version: N7000XXLTA CSC version: N7000MAXLT5 CSC country code: AUSTRIA CSC sales code: MAX HW version: MP 0.700 Phone S/N: RV1C32Q862W Modem board: RF cal date: 2012.4.9 IMEI: 359548049850097 Checking Super user right... true Reading nv data... OK Checking magic... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool v.20.5

02-18-2016, 15:00	#15643 (permalink)
rehansk8879 No Life Poster Join Date: Jun 2014 Location: GSM FORUM ♥ Posts: 2,257 Member: 2207555 Status: Offline Thanks Meter: 1,622	SM-B313E Hang on logo,solved by Flash FLASH INSTRUCTIONS: 1. Choose correct flash file(s). 2. Choose flash option if needed: -'Re-write NV' - Warning! This option will erase all calibration data! -'Single file firmware' - if you have *.pac firmware 3. Press 'Flash' button. 4. Connect phone in flash mode (Press 'OK' button (Centre of navigation buttons module) and connect USB cable). Operation: Flash Selected model: SM-B313E Software version: 24.3 Waiting phone... detected COM6 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Saved to C:\Program Files\Z3X\Samsung\SamsungToolPRO\backup\NV\nvitem_ SM-B313E_18-2-2016_19-10-3.bin Sending SSBOOT... OK Sending PS... OK Sending CSC... OK Erasing FLASH... OK Flashing done (time - 00:03:45) Done with Samsung Tool PRO v.24.3

02-18-2016, 18:37	#15644 (permalink)
rehansk8879 No Life Poster Join Date: Jun 2014 Location: GSM FORUM ♥ Posts: 2,257 Member: 2207555 Status: Offline Thanks Meter: 1,622	SM-G350E Flash Done FLASH INSTRUCTIONS: 1. Choose correct flash file(s). 2. If you have PIT file chosen, then you must check 'Repartition' option. 3. Check flashing options if needed (Repartition, EFS clear, Boot update). 4. Power on phone in download mode (turn off phone, press vol.down + home + power). 5. Connect phone to PC with USB cable, install drivers if needed. 6. Press 'Flash' button. Operation: Flash Selected model: SM-G350E Software version: 24.3 File analysis... OK Total file size: 0x39FABF64 (927 Mb) Searching USB Flash Interface... detected COM7 Setup connection... OK Set PIT file... OK Reading PIT from phone... OK Sending spl.img... OK Sending sboot.bin... OK Sending sboot2.bin... OK Sending param.lfs... OK Sending boot.img... OK Sending recovery.img... OK Sending system.img... OK Sending SPRDCP.img... OK Sending SPRDDSP.img... OK Sending nvitem.bin... OK Sending cache.img... OK Sending hidden.img... OK Flashing done (time - 00:04:38) Done with Samsung Tool PRO v.24.3

02-18-2016, 20:01	#15645 (permalink)
grmcrkrs Freak Poster Join Date: Nov 2015 Location: Alabama, United States Age: 41 Posts: 143 Member: 2489757 Status: Offline Thanks Meter: 6	SM-N900T Unlock Operation: Unlock Selected model: SM-N900T Selected port: COM160 SAMSUNG Mobile USB Serial Port Software version: 24.3 Reading phone info... Reading IMEI... OK IMEI: 357507050047664 Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.24.3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29