Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1056 - GSM-Forum

Dilip_Nath · 03-15-2016, 08:43

Dilip_Nath · 03-15-2016, 08:47

Code:

  FLASH INSTRUCTIONS:
  1. Choose correct flash file(s).
  2. If you have PIT file chosen, then you must check 'Repartition' option. 
  3. Check flashing options if needed (Repartition, EFS clear, Boot update).
  4. Power on phone in download mode (turn off phone, press vol.down + home + power).
  5. Connect phone to PC with USB cable, install drivers if needed.
  6. Press 'Flash' button. 

Operation: Flash
Selected model: SHV-E250K
Software version: 24.7

File analysis... OK
Total file size: 0x8013A248 (2049 Mb)
Searching USB Flash Interface... detected COM35
Setup connection... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending tz.img... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending cache.img... OK
Sending hidden.img... OK
Sending modem.bin... OK
Flashing done (time - 00:06:35)

Done with Samsung Tool PRO v.24.7

Dilip_Nath · 03-15-2016, 08:49

bavesore · 03-15-2016, 12:03

HER IS THE LOG:

Code:

[ 3/15/2016 11:57:00 ص Unlock ] Operation: Unlock
[ 3/15/2016 11:57:00 ص Unlock ] Selected model: SM-G357FZ
[ 3/15/2016 11:57:00 ص Unlock ] Selected port: COM8 ?SAMSUNG Mobile USB Serial Port 
[ 3/15/2016 11:57:00 ص Unlock ] Software version: 24.7
[ 3/15/2016 11:57:00 ص Unlock ] 
[ 3/15/2016 11:57:00 ص Unlock ] Reading phone info...
[ 3/15/2016 11:57:00 ص Unlock ] Reading IMEI... OK
[ 3/15/2016 11:58:00 ص Unlock ] IMEI: 359************
[ 3/15/2016 11:58:00 ص Unlock ] Unlocking... OK
[ 3/15/2016 11:58:00 ص Unlock ] Reseting... OK
[ 3/15/2016 11:58:00 ص Unlock ] Unlock done

miguelstorres · 03-15-2016, 18:57

Operation: Unlock
Selected model: SM-N920T
Software version: 24.6

Waiting ADB device... OK
Reading phone info...
Model: SM-N920T
Android version: 5.1.1
Product code: SM-N920TZKATMB
Phone version: N920TUVS2COKC
PDA version: N920TUVS2COKC
CSC version: N920TTMB2COKC
CSC country code: USA
CSC sales code: TMB
HW version: REV0.2
Phone S/N: RF8G80N98PA
Modem board: SHANNON333
RF cal date: 20150808
IMEI:
Checking Super user right... true
Initialization AT RIL... OK
Check version... OK
Initializating zTool... OK
Running zTool, please wait... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Writing nv data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.24.6

frankcelular1 · 03-15-2016, 21:30

Operation: Unlock
Selected model: SM-J110M
Software version: 24.7

Waiting ADB device... OK
Reading phone info...
Model: SM-J110M
Android version: 5.1.1
Product code: SM-J110MZWACDR
Phone version: J110MUBU0AOK3
PDA version: J110MUBU0AOK2
CSC version: J110MUWA0AOK1
CSC country code: Dominican Republic
CSC sales code: CDR
HW version: MP 0.400
Phone S/N: R58H204BNNR
Modem board:
RF cal date: 20160202
IMEI:
Checking Super user right... true
Reading nv data... OK
Analysing SEC file... OK
Initialization AT RIL... OK
Bypass MSL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.24.7

thanaks z3x

brysil · 03-16-2016, 06:41

Galaxy s6 unlocked

Operation: Read Codes
Selected model: SM-G920W8
Software version: 24.6

Checking hash file... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-G920W8
Android version: 5.1.1
Product code: SM-G920WZKABMC
Phone version: G920W8VLU3BOL1
PDA version: G920W8VLU3BOL1
CSC version: G920W8OYA3BOL1
CSC country code: Canada
CSC sales code: BMC
HW version: REV1.0
Phone S/N: RF8H111NXDV
Modem board: SHANNON333
RF cal date: 20160113
IMEI:
Checking Super user right... true
Initialization AT RIL... OK
Check version... OK
Initializating zTool... OK
Running zTool, please wait... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:07)
Freeze code: 19625097
NET lock: 79268084
Sub lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.24.6

kiki49 · 03-16-2016, 20:29

Operation: Reset FRP/React/EE
Selected model: SM-G920T
Software version: 24.7

Searching Samsung USB Flash Interface... detected COM62
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... OK
Erasing Reactivation lock... OK
Searching EE lock... OK
Erasing EE lock... OK
Reset done

Done with Samsung Tool PRO v.24.7

Gambitv01 · 03-16-2016, 20:58

Operation: Unlock SPRNT
Selected model: SM-N910P
Selected port: COM97 SAMSUNG Mobile USB Serial Port
Software version: 22.5

Waiting ADB device... OK
Reading phone info...
Model: SM-N910P
Android version: 4.4.4
Product code: Not Active
Phone version: N910PVPU1ANIE
PDA version: N910PVPU1ANIE
CSC version: N910PSPT1ANIE
CSC country code: USA
CSC sales code: SPR
HW version: N910P.05
Phone S/N: 00000000000
Modem board: MDM9625M
RF cal date: 2014.11.20
IMEI: XXXXXXXXXX
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.22.5

Operation: Unlock
Selected model: SM-N910P
Selected port: COM97 SAMSUNG Mobile USB Serial Port
Software version: 22.5

Reading phone info...
Reading IMEI... OK
IMEI: XXXXXXXXXXX
Reading security... new type
Bypassing... OK
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.22.5

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-N900P
Android version: 4.3
Product code: Not Active
Phone version: N900PVPUBMJ4
PDA version: N900PVPUBMJ4
CSC version: N900PSPTBMJ4
CSC country code: USA
CSC sales code: XAS
HW version: N900P.12
Phone S/N: 00000000000
Modem board: MSM8974
RF cal date: 2013.11.25
IMEI: 990004389176813
Initialization AT RIL... OK
Reading SPC... OK
SPC/MSL code: ******
Done with Samsung Tool PRO v.24.7

Operation: Unlock
Selected model: SM-N900P
Selected port: COM101 SAMSUNG Mobile USB Serial Port
Software version: 24.7

Reading phone info...
Reading IMEI... OK
IMEI: XXXXXXXXXXXX
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.24.7

Operation: Unlock SPRNT
Selected model: SM-N900P
Selected port: COM101 SAMSUNG Mobile USB Serial Port
Software version: 24.7

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-N900P
Android version: 4.3
Product code: Not Active
Phone version: N900PVPUBMJ4
PDA version: N900PVPUBMJ4
CSC version: N900PSPTBMJ4
CSC country code: USA
CSC sales code: XAS
HW version: N900P.12
Phone S/N: 00000000000
Modem board: MSM8974
RF cal date: 2013.11.25
IMEI: 9900XXXXXXXXXX
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.24.7

CastleSamsung12 · 03-17-2016, 02:42

Anyone needing help with G920a, g925a, g928a, n920a pm me I will help you

kingsoftaz · 03-17-2016, 14:28

Remove FRP J700H with Z3X

creconinfo · 03-17-2016, 15:03

I WANT TO KNOW ONE MORE THINGS THAT HOW CAN WE ASSURE THAT WE NEED TO FLASH MODEM IF UNLOCK IS NOT WORK?
CAN ANYBODY TELL ME ANY TECHNIQUE...HOW WE CAN CHECK THAT WE NEED TO FLASH MODEL ON SPECIFIC BUILD NUMBER?

SUPPOSE I HAVE G928TUVS2COKC.
CAN I NEED TO FLLASH MODEM IN THIS FIRMWARE? AND HOW CAN SURE?
I HEARD THAT any baseband that LAST TO 2nd character is K or higher. we need to flash modem before unlock phone? is it true?

creconinfo · 03-17-2016, 15:03

Operation: Unlock
Selected model: SM-N920T
Software version: 24.7

Waiting ADB device... OK
Reading phone info...
Model: SM-N920T
Android version: 5.1.1
Product code: SM-N920TZDATMB
Phone version: N920TUVS2COKC
PDA version: N920TUVS2COKC
CSC version: N920TTMB2COKC
CSC country code: USA
CSC sales code: TMB
HW version: REV0.2
Phone S/N: RF8GB0ZRKED
Modem board: SHANNON333
RF cal date: 20160117
IMEI:
Checking Super user right... true
Initialization AT RIL... OK
Check version... OK
Initializating zTool... OK
Running zTool, please wait... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Writing nv data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.24.7

helpo · 03-17-2016, 16:03

samsung read phone lock done

Code:

Selected model: C5212_m
Selected com port: COM7
Selected speed port: 921600
Please, connect phone and press shortly power button
Phone Detected
Sending loader1... OK
ARM version 5B11
Sending loader2... OK
Flash ID: 00EC2206000100000034
Phone IMEI -> 359*****
Phone SW -> C5212iJPKD
Langpack-> Not found langpack !
Phone HW -> MP 0.300
Phone BT ADDR -> 0012-47-000001
Phone WI-FI ADDR ->
[NET LOCK]:00000000,00000000,
[SIM LOCK]:00000000,00000000,
[PHONE LOCK]:14736985,14736985,
[SP LOCK]:00000000,00000000,
Read Info - ok
Elapsed time: 72 second, sw ver: 3.5.0040

Gambitv01 · 03-17-2016, 20:10

Operation: Reset FRP/React/EE
Selected model: SM-G928T
Software version: 24.7

Searching Samsung USB Flash Interface... detected COM6
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... OK
Erasing Reactivation lock... OK
Searching EE lock... OK
Erasing EE lock... OK
Reset done

Done with Samsung Tool PRO v.24.7

03-15-2016, 08:43	#15826 (permalink)
Dilip_Nath No Life Poster Join Date: Nov 2006 Location: Bangladesh Posts: 1,377 Member: 387110 Status: Offline Sonork: Not Use Thanks Meter: 630	SM-J500F Direct Unlock Done

03-15-2016, 08:49	#15828 (permalink)
Dilip_Nath No Life Poster Join Date: Nov 2006 Location: Bangladesh Posts: 1,377 Member: 387110 Status: Offline Sonork: Not Use Thanks Meter: 630	GT-I9301I Unlock Done

03-15-2016, 18:57	#15830 (permalink)
miguelstorres Insane Poster Join Date: Jan 2016 Posts: 63 Member: 2510231 Status: Offline Thanks Meter: 11	Sm-n920t 5.1.1 okc unlocked Operation: Unlock Selected model: SM-N920T Software version: 24.6 Waiting ADB device... OK Reading phone info... Model: SM-N920T Android version: 5.1.1 Product code: SM-N920TZKATMB Phone version: N920TUVS2COKC PDA version: N920TUVS2COKC CSC version: N920TTMB2COKC CSC country code: USA CSC sales code: TMB HW version: REV0.2 Phone S/N: RF8G80N98PA Modem board: SHANNON333 RF cal date: 20150808 IMEI: Checking Super user right... true Initialization AT RIL... OK Check version... OK Initializating zTool... OK Running zTool, please wait... OK Reading nv data... OK Checking NV data... OK Calculating... OK Writing nv data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.24.6

03-15-2016, 21:30	#15831 (permalink)
frankcelular1 No Life Poster Join Date: Dec 2008 Location: just around Posts: 1,779 Member: 914220 Status: Offline Thanks Meter: 206	j110m 5.1.1 unlock ok Operation: Unlock Selected model: SM-J110M Software version: 24.7 Waiting ADB device... OK Reading phone info... Model: SM-J110M Android version: 5.1.1 Product code: SM-J110MZWACDR Phone version: J110MUBU0AOK3 PDA version: J110MUBU0AOK2 CSC version: J110MUWA0AOK1 CSC country code: Dominican Republic CSC sales code: CDR HW version: MP 0.400 Phone S/N: R58H204BNNR Modem board: RF cal date: 20160202 IMEI: Checking Super user right... true Reading nv data... OK Analysing SEC file... OK Initialization AT RIL... OK Bypass MSL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.24.7 thanaks z3x

03-17-2016, 15:03	#15837 (permalink)
creconinfo Freak Poster Join Date: Feb 2016 Location: GJ, India Posts: 213 Member: 2527669 Status: Offline Sonork: 100.1672079 Thanks Meter: 33	Bang bang bang - note 5 sm-n920 5.1.1 unlocked I WANT TO KNOW ONE MORE THINGS THAT HOW CAN WE ASSURE THAT WE NEED TO FLASH MODEM IF UNLOCK IS NOT WORK? CAN ANYBODY TELL ME ANY TECHNIQUE...HOW WE CAN CHECK THAT WE NEED TO FLASH MODEL ON SPECIFIC BUILD NUMBER? SUPPOSE I HAVE G928TUVS2COKC. CAN I NEED TO FLLASH MODEM IN THIS FIRMWARE? AND HOW CAN SURE? I HEARD THAT any baseband that LAST TO 2nd character is K or higher. we need to flash modem before unlock phone? is it true?

03-16-2016, 06:41	#15832 (permalink)
brysil Freak Poster Join Date: Apr 2007 Location: EDMONTON, CA / PH Posts: 263 Member: 489518 Status: Offline Thanks Meter: 47	Galaxy s6 unlocked Operation: Read Codes Selected model: SM-G920W8 Software version: 24.6 Checking hash file... OK Waiting ADB device... OK Reading phone info... Model: SM-G920W8 Android version: 5.1.1 Product code: SM-G920WZKABMC Phone version: G920W8VLU3BOL1 PDA version: G920W8VLU3BOL1 CSC version: G920W8OYA3BOL1 CSC country code: Canada CSC sales code: BMC HW version: REV1.0 Phone S/N: RF8H111NXDV Modem board: SHANNON333 RF cal date: 20160113 IMEI: Checking Super user right... true Initialization AT RIL... OK Check version... OK Initializating zTool... OK Running zTool, please wait... OK Reading nv data... OK Checking NV data... OK Calculating... OK Please wait, calculating codes... OK (time - 00:00:07) Freeze code: 19625097 NET lock: 79268084 Sub lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.24.6

03-16-2016, 20:29	#15833 (permalink)
kiki49 No Life Poster Join Date: Sep 2010 Location: Gsm-Djibouti Posts: 637 Member: 1406357 Status: Offline Sonork: 100.1654421 Thanks Meter: 45	Operation: Reset FRP/React/EE Selected model: SM-G920T Software version: 24.7 Searching Samsung USB Flash Interface... detected COM62 Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP... OK Searching Reactivation lock... OK Erasing Reactivation lock... OK Searching EE lock... OK Erasing EE lock... OK Reset done Done with Samsung Tool PRO v.24.7

03-16-2016, 20:58	#15834 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	Operation: Unlock SPRNT Selected model: SM-N910P Selected port: COM97 SAMSUNG Mobile USB Serial Port Software version: 22.5 Waiting ADB device... OK Reading phone info... Model: SM-N910P Android version: 4.4.4 Product code: Not Active Phone version: N910PVPU1ANIE PDA version: N910PVPU1ANIE CSC version: N910PSPT1ANIE CSC country code: USA CSC sales code: SPR HW version: N910P.05 Phone S/N: 00000000000 Modem board: MDM9625M RF cal date: 2014.11.20 IMEI: XXXXXXXXXX Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.22.5 Operation: Unlock Selected model: SM-N910P Selected port: COM97 SAMSUNG Mobile USB Serial Port Software version: 22.5 Reading phone info... Reading IMEI... OK IMEI: XXXXXXXXXXX Reading security... new type Bypassing... OK Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.22.5 Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-N900P Android version: 4.3 Product code: Not Active Phone version: N900PVPUBMJ4 PDA version: N900PVPUBMJ4 CSC version: N900PSPTBMJ4 CSC country code: USA CSC sales code: XAS HW version: N900P.12 Phone S/N: 00000000000 Modem board: MSM8974 RF cal date: 2013.11.25 IMEI: 990004389176813 Initialization AT RIL... OK Reading SPC... OK SPC/MSL code: ****** Done with Samsung Tool PRO v.24.7 Operation: Unlock Selected model: SM-N900P Selected port: COM101 SAMSUNG Mobile USB Serial Port Software version: 24.7 Reading phone info... Reading IMEI... OK IMEI: XXXXXXXXXXXX Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.24.7 Operation: Unlock SPRNT Selected model: SM-N900P Selected port: COM101 SAMSUNG Mobile USB Serial Port Software version: 24.7 Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-N900P Android version: 4.3 Product code: Not Active Phone version: N900PVPUBMJ4 PDA version: N900PVPUBMJ4 CSC version: N900PSPTBMJ4 CSC country code: USA CSC sales code: XAS HW version: N900P.12 Phone S/N: 00000000000 Modem board: MSM8974 RF cal date: 2013.11.25 IMEI: 9900XXXXXXXXXX Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.24.7

03-17-2016, 02:42	#15835 (permalink)
CastleSamsung12 Freak Poster Join Date: Jun 2015 Location: Eastern U.S. Posts: 157 Member: 2417116 Status: Offline Sonork: 100.1671776 Thanks Meter: 273	Anyone needing help with G920a, g925a, g928a, n920a pm me I will help you

03-17-2016, 14:28	#15836 (permalink)
kingsoftaz Freak Poster Join Date: Aug 2013 Age: 33 Posts: 278 Member: 1996171 Status: Offline Thanks Meter: 74	Remove FRP J700H with Z3X

03-17-2016, 15:03	#15838 (permalink)
creconinfo Freak Poster Join Date: Feb 2016 Location: GJ, India Posts: 213 Member: 2527669 Status: Offline Sonork: 100.1672079 Thanks Meter: 33	Operation: Unlock Selected model: SM-N920T Software version: 24.7 Waiting ADB device... OK Reading phone info... Model: SM-N920T Android version: 5.1.1 Product code: SM-N920TZDATMB Phone version: N920TUVS2COKC PDA version: N920TUVS2COKC CSC version: N920TTMB2COKC CSC country code: USA CSC sales code: TMB HW version: REV0.2 Phone S/N: RF8GB0ZRKED Modem board: SHANNON333 RF cal date: 20160117 IMEI: Checking Super user right... true Initialization AT RIL... OK Check version... OK Initializating zTool... OK Running zTool, please wait... OK Reading nv data... OK Checking NV data... OK Calculating... OK Writing nv data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.24.7

03-17-2016, 20:10	#15840 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	Operation: Reset FRP/React/EE Selected model: SM-G928T Software version: 24.7 Searching Samsung USB Flash Interface... detected COM6 Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP... OK Searching Reactivation lock... OK Erasing Reactivation lock... OK Searching EE lock... OK Erasing EE lock... OK Reset done Done with Samsung Tool PRO v.24.7

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29