Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1083 - GSM-Forum

shohag.bd · 05-27-2016, 06:31

thanks to Z3X Team

Operation: Reset FRP/React/EE
Selected model: SM-N920I
Software version: 25.4

Searching Samsung USB Flash Interface... detected COM275
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... OK
Erasing Reactivation lock... OK
Searching EE lock... OK
Erasing EE lock... OK
Reset done
Done with Samsung Tool PRO v.25.4

boliargsm · 05-27-2016, 18:25

Root by CF-Auto-Root-zeroltetmo-zeroltetmo-smg925t.tar

And unlock very easy

Waiting ADB device... OK
Reading phone info...
Model: SM-G925T
Android version: 6.0.1
Product code: SM2G925TZDATMB
Phone version: G925TUVU3EPD1
PDA version: G925TUVU3EPD1
CSC version: G925TTMB3EPD1
CSC country code: USA
CSC sales code: TMB
HW version: REV0.2
Phone S/N: R58G81C42XA
Modem board: SHANNON333
RF cal date: 20150819
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.5

kingsoftaz · 05-27-2016, 20:35

http://s33.postimg.org/w3v75np6n/g925f_repair_imei.png
repair imei G920f by z3x

miftahuljawwal · 05-27-2016, 22:36

Phone found.
Can't kill external ADB references. Please, close all programs that use
ADB server.
Detected phone model: GT-I9100
Firmware compiled date: Mon Jan 14 16:51:42 KST 2013
PDA version: I9100XWLS8
CSC version: I9100FOPLS3
SW version: I9100XXLS8
Phone IMEI: 358373046089461
Phone SN: 00000000000
Android version: 4.1.2 (JZO54K)
Country: SPAIN
HW platform: exynos4
HW Chip: unknown
HW Modem: unknown
Codename: GT-I9100
Repairing Serial Number. It can take some time. Please wait...
Phone will restart now
SN repaired successfully.
Performed by 2.2.5 software version
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM58
Selected model: GT-I9100
Searching for a phone. Please wait...
Can't kill external ADB references. Please, close all programs that use
ADB server.
Phone found.
Can't kill external ADB references. Please, close all programs that use
ADB server.
Detected phone model: GT-I9100
Firmware compiled date: Mon Jan 14 16:51:42 KST 2013
PDA version: I9100XWLS8
CSC version: I9100FOPLS3
SW version: I9100XXLS8
Phone IMEI: 358373046089461
Phone SN: RV1C63EWQSV
Android version: 4.1.2 (JZO54K)
Country: SPAIN
HW platform: exynos4
HW Chip: unknown
HW Modem: unknown
Codename: GT-I9100
Unlocking phone...
Phone unlocking failed
Performed by 2.2.5 software version
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM58
Selected model: GT-I9100
Searching for a phone. Please wait...
ADB server killed.
Phone found.
Detected phone model: GT-I9100
Firmware compiled date: Mon Jan 14 16:51:42 KST 2013
PDA version: I9100XWLS8
CSC version: I9100FOPLS3
SW version: I9100XXLS8
Phone IMEI: 358373046089461
Phone SN: RV1C63EWQSV
Android version: 4.1.2 (JZO54K)
Country: SPAIN
HW platform: exynos4
HW Chip: unknown
HW Modem: unknown
Codename: GT-I9100
Unlocking phone...
Phone is successfully unlocked
Performed by 2.2.5 software version

Durgaraob · 05-28-2016, 12:05

Samsung g530f succefully unlocked
after unlock noservice and emergency calls ******ed *#0011# imei cert failed
after write g530f imei cert and g530h qcn signal is came back
thanku z3x always best

genci titi 2002 · 05-29-2016, 09:07

UNLOCK INSTRUCTIONS:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
Or use 'Activate Diag' function from 'Repair' tab.
4. Connect phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SM-G530AZ
Selected port: COM272 SAMSUNG Mobile USB Serial Port
Software version: 25.5

Reading phone info...
Reading IMEI... OK
IMEI: 3575490669xxx102
Unlocking... OK
Reseting... OK
Unlock done
Done with Samsung Tool PRO v.25.5

ibrahimtr · 05-29-2016, 12:22

E1200R UNLOCK DONE

Waiting phone... detected COM73
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI Master: 358xxxxxxxxx
Phone HW: MP 0.400
Product code:
Phone S/N: R21G30BMXC
Sending NV... OK
Unlock done

Done with Samsung Tool PRO v.25.5

AhmetSuat · 05-30-2016, 12:16

Searching Samsung modem... detected COM48
Reading phone info...
Model:
Country code:
Factory SW:
Unique number:
Memory phone:
Software version: B312EHXXNF1/B312EHOJVNF2
IMEI: ************126
Reading Phone S/N... OK
Phone S/N: R21G915E69
Bypass MSL... OK
Repairing IMEI... OK
Repair done
Done with Samsung Tool PRO v.25.5

Tanha0321 · 05-30-2016, 16:58

Code:

Operation: Reset FRP/React/EE
Selected model: SM-J500G
Selected port: 
Software version: 25.5

Searching Samsung USB Flash Interface... detected COM53
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... not supported
Searching EE lock... OK
Erasing EE lock... OK
Reset done

Done with Samsung Tool PRO v.25.5

sebY7676 · 05-31-2016, 07:09

S7390 repaired successfully

Code:

Selected model: S7390
Selected port: COM10 Z3X BOX Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: GT-S7390
Android version: 4.1.2
Product code: Unknown
Phone version: S7390XXUAMJ5
PDA version: S7390XXUAMJ3
CSC version: S7390ORLAMJ1
IMEI: 3585990557xxxxx
Phone S/N: R21F10ZW2SY
Checking Super user right... true
Repairing network... OK
Reading data from phone... OK
Writing data to phone... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool v.18.9
Done with Samsung Tool v.18.9

sr8787 · 05-31-2016, 09:20

Samsung Galaxy Gio s5660m Unlock Done by Read Code

Operation: Read Codes
Selected model: GT-S5660M
Selected port: COM502 SAMSUNG Android USB Diagnostic Serial Port (WDM)
Software version: 25.5

Checking phone at COM502
Reading phone info... OK
Model: GT-S5660M
Country code: Ä³³ª´Ù / BMC
Cal date: 2011-07-26
Factory SW: S5660MUGKG3
Unique number: 80710002216401
Memory phone: KAT007012C(S5660)
Phone S/N: RV1C40KVGC
PDA/CSC version: S5660MUGKG3/S5660MBMCKG3
Phone version: S5660MUGKG3
Phone HW: MP 0.600
Cal date: 2012.04.07
Reading IMEI... OK
IMEI: 357823041xxxxxx
Reseting MSL... OK
Bypass MSL... OK
Reading codes... OK
Freeze code: 19259694
NET lock: 03869283

Sub lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.25.5

Thanks z3x Team

razib143 · 05-31-2016, 13:23

Samsung E1270 Unlock code read done..

UNLOCK INSTRUCTIONS:
Flash mode:
COM Port does not matter, phone will be detect automatically.
1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
2. Connect phone in flash mode (Press 'OK' button (Centre of navigation buttons module) and connect USB cable).

Normal mode:
1. Connect powered on phone to USB, choose correct COM port in port settings.
1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.

Operation: Read Codes
Selected model: GT-E1270
Selected port: COM52 SciCmpst Diag
Software version: 25.3

Reading phone info... OK
IMEI Master: 35831706332XXXX
Product code:
Phone HW: MP 0.700
Phone S/N: RV1G21NJAF
Reading codes... OK
Please wait, calculating codes... OK (time - 00:01:26)
Freeze code: 64969375
NET lock: 49706379
Sub lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.25.3

ssony · 05-31-2016, 15:22

http://

Gsm Narendra · 06-01-2016, 12:48

UNLOCK INSTRUCTIONS:
Direct Unlock:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC'.
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button.

Domestic Unlock:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
5. Select device in ADB settings.
6. Press 'Unlock Domestic' button.

Operation: Flash
Selected model: SM-N910P
Software version: 25.5

File analysis... OK
Total file size: 0xDD0C7C4C (3536 Mb)
Searching USB Flash Interface... detected COM31
Setup connection... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending sdi.mbn... OK
Sending NON-HLOS.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending cache.img.ext4... OK
Sending modem.bin... OK
Flashing done (time - 00:04:12)
Done with Samsung Tool PRO v.25.5

sebY7676 · 06-01-2016, 13:02

S3100 unlocked done

Code:

Selected model: S3100
Selected com port: COM10
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone SW: S3100XXII1
Phone CSC: S3100OXFII1
Phone BT ADDR: C87E-75-96F3AD
Phone  IMEI: 3538880342xxxxx
Deactivated MSL - TRUE
[FREZEE]: 83658060
[NET Lock]: 55550960
[Subset Lock]: 00000000
[SP Lock]: 00000000
[CP Lock]: 00000000
[Sim Lock]: 00000000
[Phone Lock]: 00000000
Read info - ok
Elapsed time: 18 second, sw ver: 3.5.0040

05-27-2016, 18:25	#16232 (permalink)
boliargsm No Life Poster Join Date: Oct 2008 Location: Rep Dom Age: 38 Posts: 566 Member: 884906 Status: Offline Sonork: none Thanks Meter: 77	SAMSUNG GALAXY S6 EDGE SM-G925T v 6.0.1 UNLOCK AND ROOT DONE Root by CF-Auto-Root-zeroltetmo-zeroltetmo-smg925t.tar And unlock very easy Waiting ADB device... OK Reading phone info... Model: SM-G925T Android version: 6.0.1 Product code: SM2G925TZDATMB Phone version: G925TUVU3EPD1 PDA version: G925TUVU3EPD1 CSC version: G925TTMB3EPD1 CSC country code: USA CSC sales code: TMB HW version: REV0.2 Phone S/N: R58G81C42XA Modem board: SHANNON333 RF cal date: 20150819 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK Reading nv data... OK Checking NV data... OK Calculating... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.25.5

05-28-2016, 12:05	#16235 (permalink)
Durgaraob Freak Poster Join Date: Jan 2013 Location: INDIA ANDHRAPRADESH Age: 32 Posts: 133 Member: 1873923 Status: Offline Thanks Meter: 41	succefully unlocked and repaird no service Samsung g530f succefully unlocked after unlock noservice and emergency calls *****ed #0011# imei cert failed after write g530f imei cert and g530h qcn signal is came back thanku z3x always best

05-30-2016, 12:16	#16238 (permalink)
AhmetSuat Freak Poster Join Date: Oct 2015 Posts: 371 Member: 2478777 Status: Offline Sonork: 1669951 Thanks Meter: 103	sm-b312eh imei repair Searching Samsung modem... detected COM48 Reading phone info... Model: Country code: Factory SW: Unique number: Memory phone: Software version: B312EHXXNF1/B312EHOJVNF2 IMEI: ************126 Reading Phone S/N... OK Phone S/N: R21G915E69 Bypass MSL... OK Repairing IMEI... OK Repair done Done with Samsung Tool PRO v.25.5

05-31-2016, 15:22	#16243 (permalink)
ssony No Life Poster Join Date: Mar 2012 Location: punjab Posts: 674 Member: 1732025 Status: Offline Sonork: 100.1615024 Thanks Meter: 329	Samsung G357FZ unlock Done http://

06-01-2016, 12:48	#16244 (permalink)
Gsm Narendra Freak Poster Join Date: Jun 2012 Location: India Pune Posts: 422 Member: 1778852 Status: Offline Sonork: 100.1641316 Thanks Meter: 231	Samsung SM-N910P Hang On Logo Problem Solved UNLOCK INSTRUCTIONS: Direct Unlock: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose 'DM/DUN over HSIC'. 4. Reboot phone. Or use 'Activate Diag' function from 'Repair' tab. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button. Domestic Unlock: 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options', tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'. 3. Connect the phone to PC with USB cable, install drivers if needed. 5. Select device in ADB settings. 6. Press 'Unlock Domestic' button. Operation: Flash Selected model: SM-N910P Software version: 25.5 File analysis... OK Total file size: 0xDD0C7C4C (3536 Mb) Searching USB Flash Interface... detected COM31 Setup connection... OK Reading PIT from phone... OK Sending aboot.mbn... OK Sending sbl1.mbn... OK Sending rpm.mbn... OK Sending tz.mbn... OK Sending sdi.mbn... OK Sending NON-HLOS.bin... OK Sending boot.img... OK Sending recovery.img... OK Sending system.img.ext4... OK Sending cache.img.ext4... OK Sending modem.bin... OK Flashing done (time - 00:04:12) Done with Samsung Tool PRO v.25.5

05-27-2016, 06:31	#16231 (permalink)
shohag.bd Registered User Join Date: Apr 2008 Location: searching new... Posts: 341 Member: 749179 Status: Offline Sonork: 100.1668876 Thanks Meter: 68	thanks to Z3X Team Operation: Reset FRP/React/EE Selected model: SM-N920I Software version: 25.4 Searching Samsung USB Flash Interface... detected COM275 Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP... OK Searching Reactivation lock... OK Erasing Reactivation lock... OK Searching EE lock... OK Erasing EE lock... OK Reset done Done with Samsung Tool PRO v.25.4

05-27-2016, 20:35	#16233 (permalink)
kingsoftaz Freak Poster Join Date: Aug 2013 Age: 33 Posts: 278 Member: 1996171 Status: Offline Thanks Meter: 74	http://s33.postimg.org/w3v75np6n/g925f_repair_imei.png repair imei G920f by z3x

05-27-2016, 22:36	#16234 (permalink)
miftahuljawwal Freak Poster Join Date: Jan 2007 Location: <Al hind al Garbiyya> Barbados Posts: 157 Member: 430155 Status: Offline Thanks Meter: 40	Phone found. Can't kill external ADB references. Please, close all programs that use ADB server. Detected phone model: GT-I9100 Firmware compiled date: Mon Jan 14 16:51:42 KST 2013 PDA version: I9100XWLS8 CSC version: I9100FOPLS3 SW version: I9100XXLS8 Phone IMEI: 358373046089461 Phone SN: 00000000000 Android version: 4.1.2 (JZO54K) Country: SPAIN HW platform: exynos4 HW Chip: unknown HW Modem: unknown Codename: GT-I9100 Repairing Serial Number. It can take some time. Please wait... Phone will restart now SN repaired successfully. Performed by 2.2.5 software version ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM58 Selected model: GT-I9100 Searching for a phone. Please wait... Can't kill external ADB references. Please, close all programs that use ADB server. Phone found. Can't kill external ADB references. Please, close all programs that use ADB server. Detected phone model: GT-I9100 Firmware compiled date: Mon Jan 14 16:51:42 KST 2013 PDA version: I9100XWLS8 CSC version: I9100FOPLS3 SW version: I9100XXLS8 Phone IMEI: 358373046089461 Phone SN: RV1C63EWQSV Android version: 4.1.2 (JZO54K) Country: SPAIN HW platform: exynos4 HW Chip: unknown HW Modem: unknown Codename: GT-I9100 Unlocking phone... Phone unlocking failed Performed by 2.2.5 software version ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM58 Selected model: GT-I9100 Searching for a phone. Please wait... ADB server killed. Phone found. Detected phone model: GT-I9100 Firmware compiled date: Mon Jan 14 16:51:42 KST 2013 PDA version: I9100XWLS8 CSC version: I9100FOPLS3 SW version: I9100XXLS8 Phone IMEI: 358373046089461 Phone SN: RV1C63EWQSV Android version: 4.1.2 (JZO54K) Country: SPAIN HW platform: exynos4 HW Chip: unknown HW Modem: unknown Codename: GT-I9100 Unlocking phone... Phone is successfully unlocked Performed by 2.2.5 software version

05-29-2016, 09:07	#16236 (permalink)
genci titi 2002 No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL Posts: 4,181 Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,691	UNLOCK INSTRUCTIONS: 1. Power on the phone. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and select 'DM/DUN over HSIC'. Or use 'Activate Diag' function from 'Repair' tab. 4. Connect phone to PC with USB cable, install drivers if needed. 5. Select diagnostic port in port settings. 6. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SM-G530AZ Selected port: COM272 SAMSUNG Mobile USB Serial Port Software version: 25.5 Reading phone info... Reading IMEI... OK IMEI: 3575490669xxx102 Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.25.5

05-29-2016, 12:22	#16237 (permalink)
ibrahimtr Freak Poster Join Date: Oct 2014 Location: algeria Age: 34 Posts: 161 Member: 2266626 Status: Offline Thanks Meter: 40	E1200R UNLOCK DONE Waiting phone... detected COM73 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Checking NV... OK IMEI Master: 358xxxxxxxxx Phone HW: MP 0.400 Product code: Phone S/N: R21G30BMXC Sending NV... OK Unlock done Done with Samsung Tool PRO v.25.5

05-31-2016, 09:20	#16241 (permalink)
sr8787 No Life Poster Join Date: Jun 2008 Location: Punjabi University India Posts: 1,473 Member: 788946 Status: Offline Sonork: 100.1682685 Thanks Meter: 502	Samsung Galaxy Gio s5660m Unlock Done by Read Code Operation: Read Codes Selected model: GT-S5660M Selected port: COM502 SAMSUNG Android USB Diagnostic Serial Port (WDM) Software version: 25.5 Checking phone at COM502 Reading phone info... OK Model: GT-S5660M Country code: Ä³³ª´Ù / BMC Cal date: 2011-07-26 Factory SW: S5660MUGKG3 Unique number: 80710002216401 Memory phone: KAT007012C(S5660) Phone S/N: RV1C40KVGC PDA/CSC version: S5660MUGKG3/S5660MBMCKG3 Phone version: S5660MUGKG3 Phone HW: MP 0.600 Cal date: 2012.04.07 Reading IMEI... OK IMEI: 357823041xxxxxx Reseting MSL... OK Bypass MSL... OK Reading codes... OK Freeze code: 19259694 NET lock: 03869283 Sub lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.25.5 Thanks z3x Team

05-31-2016, 13:23	#16242 (permalink)
razib143 No Life Poster Join Date: Sep 2006 Location: Dhaka Bangladesh Age: 33 Posts: 3,491 Member: 348877 Status: Offline Sonork: 1601289 Thanks Meter: 1,178	Samsung E1270 Unlock code read done.. UNLOCK INSTRUCTIONS: Flash mode: COM Port does not matter, phone will be detect automatically. 1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes. 2. Connect phone in flash mode (Press 'OK' button (Centre of navigation buttons module) and connect USB cable). Normal mode: 1. Connect powered on phone to USB, choose correct COM port in port settings. 1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes. Operation: Read Codes Selected model: GT-E1270 Selected port: COM52 SciCmpst Diag Software version: 25.3 Reading phone info... OK IMEI Master: 35831706332XXXX Product code: Phone HW: MP 0.700 Phone S/N: RV1G21NJAF Reading codes... OK Please wait, calculating codes... OK (time - 00:01:26) Freeze code: 64969375 NET lock: 49706379 Sub lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.25.3

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29