Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1353 - GSM-Forum

chipscell25 · 03-14-2018, 23:11

Operation: Unlock
Selected model: SM-N9005
Selected port: COM256 SAMSUNG Mobile USB Serial Port
Software version: 30.9

Reading phone info...
Reading IMEI... OK
IMEI: 35473xxxxxxxxxx
Unlocking... OK
Reseting... OK
Unlock done
Done with Samsung Tool PRO v.30.9

chipscell25 · 03-14-2018, 23:11

Operation: Unlock
Selected model: SM-N9005
Selected port: COM256 SAMSUNG Mobile USB Serial Port
Software version: 30.9

Reading phone info...
Reading IMEI... OK
IMEI: 35473xxxxxxxxxx
Unlocking... OK
Reseting... OK
Unlock done
Done with Samsung Tool PRO v.30.9

chipscell25 · 03-14-2018, 23:37

Operation: Unlock
Selected model: GT-S5570
Selected port: COM10 Z3X BOX Serial Port
Software version: 30.9

Checking phone at COM10
Reading phone info... OK
Model: GT-S5570
Country code: ½ºÆäÀÎ
Cal date: 2011-11-17
Factory SW: S557BGKS3_XECKS1
Unique number: 55750003000420
Memory phone: KAT007012C(S5570)
Phone SN: R21C11QBQH
PDA/CSC version: S5570BGKS3/S5570XECKS1
Phone version: S5570XWKS2
Phone HW: MP 0.302
Cal date: 2012.01.08
Reading IMEI... OK
IMEI: 35172xxxxxxxx
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.30.9

taimur-ahmad · 03-15-2018, 07:54

sasmung j100h flash done

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-J100F
Software version: 29.9

File analysis... OK
Total file size: 0x3C734418 (967 Mb)
Searching USB Flash interface... COM15 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending spl.img... OK
Sending sboot.bin... OK
Sending sboot2.bin... OK
Sending param.lfs... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending SPRDCP.img... OK
Sending SPRDDSP.img... OK
Sending nvitem.bin... OK
Sending cache.img... OK
Sending hidden.img... OK
Flashing done (time - 00:02:32)

Done with Samsung Tool PRO v.29.9

Arafat Mashaka · 03-15-2018, 08:31

Operation: Unlock
Selected model: SM-G360T
Software version: 30.9

Checking Login and Password... OK
Ballance: 25 crd.
You have 25 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G360T
Android version: 5.1.1
Product code: SM2G360TZWATMB
Phone version: G360TUVU1APG2
PDA version: G360TUVU1APG2
CSC version: G360TTMB1APG2
CSC country code: USA
CSC sales code: TMB
HW version: REV0.1
Phone SN: R28G917DJGJ
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2016-07-01
RF cal date: 2015.09.09
IMEI:
Checking Super user right... true
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM6 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.9

wsmobile · 03-15-2018, 08:44

Operation: Unlock
Selected model: SM-G920A
Software version: 30.9

Searching Samsung modem... detected COM32
Reading phone info... OK
Model: SM-G920A
AP version: G920AUCS7ERA2
CSC version: G920AATT7ERA2
CP version: G920AUCU7ARA1
Product code: ATT
Phone SN: R38G30JDANW
Unique number: 03157DF37CBB571D
Reading IMEI... OK
IMEI: 357743061236604 (SIGN: NG_SIGN)
Reading data from phone... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.9

djj007 · 03-15-2018, 11:08

Operation: Reset FRP/React/EE
Selected model: SM-J700F
Software version: 30.9

Searching Samsung USB Flash interface... COM186 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.30.9

djj007 · 03-15-2018, 11:33

Operation: Reset FRP/React/EE
Selected model: SM-J200G
Software version: 30.9

Searching Samsung USB Flash interface... COM186 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.30.9

aukonline · 03-15-2018, 13:34

Samsung n920a 7.0 unlock success

fokal2008 · 03-15-2018, 14:52

SAMSUNG G870A FLASHING SUCCESFFUL DONE BY Z3XBOX

Code:

  FLASH INSTRUCTIONS:
  1. Choose correct flash file(s).
  2. If you have PIT file chosen, then you must check 'Repartition' option.
  3. Check flashing options if needed (Repartition, EFS clear, Boot update).
  4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
  5. Connect the phone to PC with USB cable, install drivers if needed.
  6. Press 'Flash' button. 

Operation: Flash
Selected model: SM-G870A
Software version: 30.9

File analysis... OK
Total file size: 0x98B44420 (2443 Mb)
Searching USB Flash interface... COM8 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending sdi.mbn... OK
Sending NON-HLOS.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending persist.img.ext4... OK
Sending modem.bin... OK
Sending cache.img.ext4... OK
Flashing done (time - 00:04:21)

Done with Samsung Tool PRO v.30.9

chipscell25 · 03-15-2018, 20:51

UNLOCK INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in
'Settings'-'Applications'-'Development' for Android 2.x or
'Settings'-'Developer options' for Android 4.x.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.

Operation: Unlock
Selected model: GT-S6790L
Software version: 30.9

Waiting ADB device... OK
Reading phone info...
Model: GT-S6790L
Android version: 4.1.2
Product code: GT-S6790PWLVMT
Phone version: S6790LUBAMK2
PDA version: S6790LUBAML1
CSC version: S6790LTFGANB1
CSC country code: OPEN
CSC sales code: TFG
HW version: MP 0.101
Phone SN: RV1F72WY13J
Modem board:
RF cal date: 20140724
IMEI: 35937xxxxxxxxxx
Checking Super user right... true
Reading data from phone... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.9

abikarki · 03-16-2018, 05:07

UNLOCK INSTRUCTIONS:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
If phone ask codes after unlocking, use:
PUK - 12345678
PIN - 11111111

To reset Google account activation or Samsung reactivation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Reset FRP/React/EE
Selected model: SM-J210F
Software version: 31.0

Searching Samsung USB Flash interface... COM12 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.31.0

kathir. · 03-16-2018, 07:10

Samsung S7 Edge 7.0 Frp Done With Ufs Method

djj007 · 03-16-2018, 07:30

Operation: Reset FRP
Selected model: SM-G610F
Software version: 31.0

Waiting ADB device... OK
Reading phone info...
Model: SM-G610F
Android version: 6.0.1
Product code: SM-G610FZDDINS
Phone version: G610FDDU1AQC2
PDA version: FA60_G610FDDU1AQC2
CSC version:
CSC country code:
CSC sales code:
HW version: MP 0.300
Phone SN: RZ8HA0KAE5E
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2016-08-01
RF cal date: 20161008
IMEI:
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.31.0

alamgir80 · 03-16-2018, 14:06

Code:

Operation: Read Codes DIAG
Selected model: SM-G610F
Software version: 30.8

Checking hash file... OK
Searching Samsung modem... detected COM85
Reading phone info... OK
Model: SM-G610F
AP version: G610FXWU1BQK3
CSC version: G610FOJW1BQK3
CP version: G610FXXU1BQJ4
Product code: KSA
Phone SN: R58J83YSPTH
Unique number: C000044356F0A64
Searching Samsung diag port... detected COM86
Reading phone info... OK
CP version: G610FXXU1BQJ4
CP build: Oct 13 2017 19:19:38
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON315
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:02)
Freeze code: 81791614
NET lock: 62813728
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.30.8

03-15-2018, 07:54	#20284 (permalink)
taimur-ahmad Banned Join Date: Oct 2017 Location: pakistan kpk mansehra Age: 26 Posts: 1,273 Member: 2765424 Status: Offline Thanks Meter: 1,039	sasmung j100h flash done *sasmung j100h flash done* FLASH INSTRUCTIONS: 1. Choose correct flash file(s). 2. If you have PIT file chosen, then you must check 'Repartition' option. 3. Check flashing options if needed (Repartition, EFS clear, Boot update). 4. Power on the phone in download mode (turn off phone, press vol.down + home + power). 5. Connect the phone to PC with USB cable, install drivers if needed. 6. Press 'Flash' button. Operation: Flash Selected model: SM-J100F Software version: 29.9 File analysis... OK Total file size: 0x3C734418 (967 Mb) Searching USB Flash interface... COM15 detected Setup connection... OK Set PIT file... OK Reading PIT from phone... OK Sending spl.img... OK Sending sboot.bin... OK Sending sboot2.bin... OK Sending param.lfs... OK Sending boot.img... OK Sending recovery.img... OK Sending system.img... OK Sending SPRDCP.img... OK Sending SPRDDSP.img... OK Sending nvitem.bin... OK Sending cache.img... OK Sending hidden.img... OK Flashing done (time - 00:02:32) Done with Samsung Tool PRO v.29.9

03-15-2018, 08:31	#20285 (permalink)
Arafat Mashaka No Life Poster Join Date: Apr 2008 Location: Burundi Bujumbura Posts: 740 Member: 750759 Status: Offline Sonork: 75101010 Thanks Meter: 169	G360T unlocked done thank you Operation: Unlock Selected model: SM-G360T Software version: 30.9 Checking Login and Password... OK Ballance: 25 crd. You have 25 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G360T Android version: 5.1.1 Product code: SM2G360TZWATMB Phone version: G360TUVU1APG2 PDA version: G360TUVU1APG2 CSC version: G360TTMB1APG2 CSC country code: USA CSC sales code: TMB HW version: REV0.1 Phone SN: R28G917DJGJ Chip name: MSM8916 Modem board: MSM8916 Security patch: 2016-07-01 RF cal date: 2015.09.09 IMEI: Checking Super user right... true Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM6 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.9

03-15-2018, 11:08	#20287 (permalink)
djj007 No Life Poster Join Date: Nov 2016 Location: GUJARAT Posts: 1,439 Member: 2643730 Status: Offline Thanks Meter: 1,115	j700f frp(j700fxxu2apc4) done by z3x in dm mode direct Operation: Reset FRP/React/EE Selected model: SM-J700F Software version: 30.9 Searching Samsung USB Flash interface... COM186 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.30.9

03-15-2018, 11:33	#20288 (permalink)
djj007 No Life Poster Join Date: Nov 2016 Location: GUJARAT Posts: 1,439 Member: 2643730 Status: Offline Thanks Meter: 1,115	J200g frp unlock by z3x in dm mode direct Operation: Reset FRP/React/EE Selected model: SM-J200G Software version: 30.9 Searching Samsung USB Flash interface... COM186 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.30.9

03-16-2018, 07:30	#20294 (permalink)
djj007 No Life Poster Join Date: Nov 2016 Location: GUJARAT Posts: 1,439 Member: 2643730 Status: Offline Thanks Meter: 1,115	G610f frp reset by z3x ,adb on by combination Operation: Reset FRP Selected model: SM-G610F Software version: 31.0 Waiting ADB device... OK Reading phone info... Model: SM-G610F Android version: 6.0.1 Product code: SM-G610FZDDINS Phone version: G610FDDU1AQC2 PDA version: FA60_G610FDDU1AQC2 CSC version: CSC country code: CSC sales code: HW version: MP 0.300 Phone SN: RZ8HA0KAE5E Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2016-08-01 RF cal date: 20161008 IMEI: Bypass FRP... OK For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.31.0

03-14-2018, 23:11	#20281 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Unlock Selected model: SM-N9005 Selected port: COM256 SAMSUNG Mobile USB Serial Port Software version: 30.9 Reading phone info... Reading IMEI... OK IMEI: 35473xxxxxxxxxx Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.30.9

03-14-2018, 23:11	#20282 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Unlock Selected model: SM-N9005 Selected port: COM256 SAMSUNG Mobile USB Serial Port Software version: 30.9 Reading phone info... Reading IMEI... OK IMEI: 35473xxxxxxxxxx Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.30.9

03-14-2018, 23:37	#20283 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Unlock Selected model: GT-S5570 Selected port: COM10 Z3X BOX Serial Port Software version: 30.9 Checking phone at COM10 Reading phone info... OK Model: GT-S5570 Country code: ½ºÆäÀÎ Cal date: 2011-11-17 Factory SW: S557BGKS3_XECKS1 Unique number: 55750003000420 Memory phone: KAT007012C(S5570) Phone SN: R21C11QBQH PDA/CSC version: S5570BGKS3/S5570XECKS1 Phone version: S5570XWKS2 Phone HW: MP 0.302 Cal date: 2012.01.08 Reading IMEI... OK IMEI: 35172xxxxxxxx Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.30.9

03-15-2018, 08:44	#20286 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	Operation: Unlock Selected model: SM-G920A Software version: 30.9 Searching Samsung modem... detected COM32 Reading phone info... OK Model: SM-G920A AP version: G920AUCS7ERA2 CSC version: G920AATT7ERA2 CP version: G920AUCU7ARA1 Product code: ATT Phone SN: R38G30JDANW Unique number: 03157DF37CBB571D Reading IMEI... OK IMEI: 357743061236604 (SIGN: NG_SIGN) Reading data from phone... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.9

03-15-2018, 20:51	#20291 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	UNLOCK INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Applications'-'Development' for Android 2.x or 'Settings'-'Developer options' for Android 4.x. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes. Operation: Unlock Selected model: GT-S6790L Software version: 30.9 Waiting ADB device... OK Reading phone info... Model: GT-S6790L Android version: 4.1.2 Product code: GT-S6790PWLVMT Phone version: S6790LUBAMK2 PDA version: S6790LUBAML1 CSC version: S6790LTFGANB1 CSC country code: OPEN CSC sales code: TFG HW version: MP 0.101 Phone SN: RV1F72WY13J Modem board: RF cal date: 20140724 IMEI: 35937xxxxxxxxxx Checking Super user right... true Reading data from phone... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.9

03-16-2018, 05:07	#20292 (permalink)
abikarki Freak Poster Join Date: Jan 2017 Location: Bardibas Age: 31 Posts: 274 Member: 2670396 Status: Offline Thanks Meter: 125	UNLOCK INSTRUCTIONS: 1. Power on the phone. 2. Connect the phone to PC with USB cable. 3. Check Samsung modem in device manager, install drivers if needed. 4. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes. If phone ask codes after unlocking, use: PUK - 12345678 PIN - 11111111 To reset Google account activation or Samsung reactivation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.) Operation: Reset FRP/React/EE Selected model: SM-J210F Software version: 31.0 Searching Samsung USB Flash interface... COM12 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.31.0

03-16-2018, 07:10	#20293 (permalink)
kathir. No Life Poster Join Date: Oct 2008 Location: chennai Posts: 722 Member: 880497 Status: Offline Thanks Meter: 197	Samsung S7 Edge 7.0 Frp Done With Ufs Method

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29