Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1378 - GSM-Forum

mr.luckytarun · 06-06-2018, 06:36

GT-E1200i Unlock Done

Arafat Mashaka · 06-06-2018, 09:28

Operation: Reset FRP UFS
Selected model: SM-N920C
Selected port: COM11 USB Serial Port
Software version: 32.4

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM11 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (N920C)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done

Done with Samsung Tool PRO v.32.4

Arafat Mashaka · 06-06-2018, 11:10

Operation: Patch Certificate
Selected model: SM-N920C
Software version: 32.4

Waiting ADB device... OK
Reading phone info...
Model: SM-N920C
Android version: 7.0
PDA version: N920CXXS4CRC2
CSC version: N920COXE4CRB1
Phone version: N920CXXU4CRB2
Product code: SM-N920CZKASER
CSC country code: Russia
CSC sales code: SER
Phone SN: RF8G91Z9MLP
IMEI: 3579250436XXXXX
HW version: MP 0.700
RF cal date: 20150919
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2018-03-01
Boot Warranty bit: 1
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading modem... OK
Patching modem... OK
Writing modem... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.32.4

EjazATF · 06-06-2018, 14:26

SM-I9300
Unknown Baseband Resolved Successfully - Original IMEI Written

Flash:

Code:

[ 6/6/2018 5:17:16 PM Flash ] Operation: Flash
[ 6/6/2018 5:17:17 PM Flash ] Selected model: GT-I9300
[ 6/6/2018 5:17:18 PM Flash ] Software version: 32.4
[ 6/6/2018 5:17:19 PM Flash ] 
[ 6/6/2018 5:17:20 PM Flash ] File analysis... OK
[ 6/6/2018 5:17:21 PM Flash ] Total file size: 0x5A92B3E4 (1449 Mb)
[ 6/6/2018 5:17:30 PM Flash ] Searching USB Flash interface... COM22 detected
[ 6/6/2018 5:17:31 PM Flash ] Setup connection... OK
[ 6/6/2018 5:17:31 PM Flash ] Set PIT file... OK
[ 6/6/2018 5:17:31 PM Flash ] Reading PIT from phone... OK
[ 6/6/2018 5:17:33 PM Flash ] Sending boot.img... OK
[ 6/6/2018 5:17:35 PM Flash ] Sending recovery.img... OK
[ 6/6/2018 5:17:38 PM Flash ] Sending system.img... OK
[ 6/6/2018 5:22:36 PM Flash ] Sending modem.bin... OK
[ 6/6/2018 5:22:41 PM Flash ] Sending cache.img... OK
[ 6/6/2018 5:22:59 PM Flash ] Sending hidden.img... OK
[ 6/6/2018 5:23:25 PM Flash ] Flashing done (time - 00:05:55)
[ 6/6/2018 5:23:25 PM Flash ]

Reset EFS

Code:

[ 6/6/2018 6:05:28 PM Reset EFS ] Operation: Reset EFS
[ 6/6/2018 6:05:28 PM Reset EFS ] Selected model: GT-I9300
[ 6/6/2018 6:05:28 PM Reset EFS ] Software version: 32.4
[ 6/6/2018 6:05:28 PM Reset EFS ] 
[ 6/6/2018 6:05:29 PM Reset EFS ] Waiting ADB device... OK
[ 6/6/2018 6:05:32 PM Reset EFS ] Reading phone info...
[ 6/6/2018 6:05:32 PM Reset EFS ] Model: GT-I9300
[ 6/6/2018 6:05:33 PM Reset EFS ] Android version: 4.3
[ 6/6/2018 6:05:36 PM Reset EFS ] PDA version: I9300XXUGMK6
[ 6/6/2018 6:05:39 PM Reset EFS ] CSC version: I9300OLBGML1
[ 6/6/2018 6:05:39 PM Reset EFS ] Phone version: 
[ 6/6/2018 6:05:39 PM Reset EFS ] Product code: 
[ 6/6/2018 6:05:40 PM Reset EFS ] CSC country code: PHILIPPINES
[ 6/6/2018 6:05:40 PM Reset EFS ] CSC sales code: GLB
[ 6/6/2018 6:05:40 PM Reset EFS ] Phone SN: 
[ 6/6/2018 6:05:40 PM Reset EFS ] IMEI: 
[ 6/6/2018 6:05:40 PM Reset EFS ] HW version: 
[ 6/6/2018 6:05:40 PM Reset EFS ] RF cal date: 
[ 6/6/2018 6:05:40 PM Reset EFS ] Chip name: EXYNOS4412
[ 6/6/2018 6:05:41 PM Reset EFS ] Modem board: 
[ 6/6/2018 6:05:41 PM Reset EFS ] Checking Super user right... true
[ 6/6/2018 6:05:41 PM Reset EFS ] Backuping EFS... OK
[ 6/6/2018 6:05:46 PM Reset EFS ] Reseting EFS... OK
[ 6/6/2018 6:05:48 PM Reset EFS ] Rebooting phone... OK
[ 6/6/2018 6:06:05 PM Reset EFS ]

Disable Factory Mode

Code:

[ 6/6/2018 6:06:49 PM Disable Factory Mode ] Operation: Disable Factory Mode
[ 6/6/2018 6:06:50 PM Disable Factory Mode ] Selected model: GT-I9300
[ 6/6/2018 6:06:50 PM Disable Factory Mode ] Software version: 32.4
[ 6/6/2018 6:06:50 PM Disable Factory Mode ] 
[ 6/6/2018 6:06:51 PM Disable Factory Mode ] Waiting ADB device... OK
[ 6/6/2018 6:06:55 PM Disable Factory Mode ] Reading phone info...
[ 6/6/2018 6:06:55 PM Disable Factory Mode ] Model: GT-I9300
[ 6/6/2018 6:06:55 PM Disable Factory Mode ] Android version: 4.3
[ 6/6/2018 6:06:55 PM Disable Factory Mode ] PDA version: I9300XXUGMK6
[ 6/6/2018 6:06:56 PM Disable Factory Mode ] CSC version: I9300OLBGML1
[ 6/6/2018 6:06:56 PM Disable Factory Mode ] Phone version: I9300DXUGMK1
[ 6/6/2018 6:06:56 PM Disable Factory Mode ] Product code: Not Active
[ 6/6/2018 6:06:57 PM Disable Factory Mode ] CSC country code: PHILIPPINES
[ 6/6/2018 6:06:57 PM Disable Factory Mode ] CSC sales code: GLB
[ 6/6/2018 6:06:57 PM Disable Factory Mode ] Phone SN: 00000000000
[ 6/6/2018 6:06:57 PM Disable Factory Mode ] IMEI: 004999010640000
[ 6/6/2018 6:06:57 PM Disable Factory Mode ] HW version: REV__
[ 6/6/2018 6:06:57 PM Disable Factory Mode ] RF cal date: none
[ 6/6/2018 6:06:58 PM Disable Factory Mode ] Chip name: EXYNOS4412
[ 6/6/2018 6:06:58 PM Disable Factory Mode ] Modem board: 
[ 6/6/2018 6:06:58 PM Disable Factory Mode ] Checking Super user right... true
[ 6/6/2018 6:06:58 PM Disable Factory Mode ] Disabling Factory mode... OK
[ 6/6/2018 6:06:59 PM Disable Factory Mode ]

Repair IMEI

Code:

[ 6/6/2018 6:08:50 PM Repair ] Operation: Repair
[ 6/6/2018 6:08:51 PM Repair ] Selected model: GT-I9300
[ 6/6/2018 6:08:52 PM Repair ] Software version: 32.4
[ 6/6/2018 6:08:52 PM Repair ]  
[ 6/6/2018 6:08:57 PM Repair ] Waiting ADB device... OK
[ 6/6/2018 6:09:05 PM Repair ] Reading phone info...
[ 6/6/2018 6:09:09 PM Repair ] Model: GT-I9300
[ 6/6/2018 6:09:24 PM Repair ] Android version: 4.3
[ 6/6/2018 6:09:37 PM Repair ] PDA version: I9300XXUGMK6
[ 6/6/2018 6:09:49 PM Repair ] CSC version: I9300OLBGML1
[ 6/6/2018 6:10:04 PM Repair ] Phone version: I9300DXUGMK1
[ 6/6/2018 6:10:32 PM Repair ] Product code: Not Active
[ 6/6/2018 6:10:47 PM Repair ] CSC country code: PHILIPPINES
[ 6/6/2018 6:10:56 PM Repair ] CSC sales code: GLB
[ 6/6/2018 6:11:00 PM Repair ] Phone SN: 00000000000
[ 6/6/2018 6:11:05 PM Repair ] IMEI: 004999010640000
[ 6/6/2018 6:11:05 PM Repair ] HW version: REV__
[ 6/6/2018 6:11:05 PM Repair ] RF cal date: none
[ 6/6/2018 6:11:05 PM Repair ] Chip name: EXYNOS4412
[ 6/6/2018 6:11:06 PM Repair ] Modem board: 
[ 6/6/2018 6:11:06 PM Repair ] Checking Super user right... true
[ 6/6/2018 6:11:07 PM Repair ] Reading NV data... OK
[ 6/6/2018 6:11:12 PM Repair ] Checking magic... OK
[ 6/6/2018 6:11:47 PM Repair ] Running zTool, please wait... OK
[ 6/6/2018 6:12:04 PM Repair ] Detected new type of security version 0
[ 6/6/2018 6:12:04 PM Repair ] Calculating... OK
[ 6/6/2018 6:12:26 PM Repair ] Writing NV Data... OK
[ 6/6/2018 6:12:31 PM Repair ] Rebooting phone... OK
[ 6/6/2018 6:12:34 PM Repair ] Repair done
[ 6/6/2018 6:12:34 PM Repair ]

Patch Certificate

Code:

[ 6/6/2018 6:13:20 PM Patch Certificate ] Operation: Patch Certificate
[ 6/6/2018 6:13:20 PM Patch Certificate ] Selected model: GT-I9300
[ 6/6/2018 6:13:20 PM Patch Certificate ] Software version: 32.4
[ 6/6/2018 6:13:20 PM Patch Certificate ] 
[ 6/6/2018 6:13:21 PM Patch Certificate ] Waiting ADB device... OK
[ 6/6/2018 6:13:26 PM Patch Certificate ] Reading phone info...
[ 6/6/2018 6:13:26 PM Patch Certificate ] Model: GT-I9300
[ 6/6/2018 6:13:26 PM Patch Certificate ] Android version: 4.3
[ 6/6/2018 6:13:26 PM Patch Certificate ] PDA version: I9300XXUGMK6
[ 6/6/2018 6:13:27 PM Patch Certificate ] CSC version: I9300OLBGML1
[ 6/6/2018 6:13:27 PM Patch Certificate ] Phone version: I9300DXUGMK1
[ 6/6/2018 6:13:27 PM Patch Certificate ] Product code: Not Active
[ 6/6/2018 6:13:27 PM Patch Certificate ] CSC country code: PHILIPPINES
[ 6/6/2018 6:13:27 PM Patch Certificate ] CSC sales code: GLB
[ 6/6/2018 6:13:27 PM Patch Certificate ] Phone SN: RF1C67MH3GW
[ 6/6/2018 6:13:27 PM Patch Certificate ] IMEI: 353720052480791
[ 6/6/2018 6:13:28 PM Patch Certificate ] HW version: REV__
[ 6/6/2018 6:13:28 PM Patch Certificate ] RF cal date: none
[ 6/6/2018 6:13:28 PM Patch Certificate ] Chip name: EXYNOS4412
[ 6/6/2018 6:13:28 PM Patch Certificate ] Modem board: 
[ 6/6/2018 6:13:28 PM Patch Certificate ] Checking Super user right... true
[ 6/6/2018 6:13:29 PM Patch Certificate ] Reading modem... OK
[ 6/6/2018 6:13:34 PM Patch Certificate ] Patching modem... OK
[ 6/6/2018 6:13:35 PM Patch Certificate ] Writing modem... OK
[ 6/6/2018 6:13:42 PM Patch Certificate ] Reading kernel... OK
[ 6/6/2018 6:13:46 PM Patch Certificate ] Patching kernel... OK
[ 6/6/2018 6:13:47 PM Patch Certificate ] Writing kernel... OK
[ 6/6/2018 6:13:54 PM Patch Certificate ] Rebooting phone... OK
[ 6/6/2018 6:13:54 PM Patch Certificate ] Patching CERT check... done
[ 6/6/2018 6:13:54 PM Patch Certificate ]

genegilseth · 06-06-2018, 16:39

After a successful unlock the phone still shows a message saying to Please contact sprint to unlock your device. This comes up under the OMADM Sprint service. Not sure how to get around this.

Operation: Unlock
Selected model: SM-G935P
Software version: 32.4

Waiting ADB device... OK
Reading phone info...
Model: SM-G950U
Android version: 7.0
PDA version: FA70_G950USQU3ARD1
CSC version:
Phone version: G950USQU3CRC7
Product code: SM-G950UZKAXAS
CSC country code:
CSC sales code:
Phone SN: R28J61R2C3M
IMEI: 355982083645093
HW version: REV1.0
RF cal date: 2017.06.15
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-02-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.32.4

technomak · 06-06-2018, 17:52

why it fails to read unlock codes of j250f
it says server error

chipscell25 · 06-06-2018, 20:44

Operation: Unlock
Selected model: SM-G550T1
Software version: 32.4

Waiting ADB device... OK
Reading phone info...
Model: SM-G550T1
Android version: 6.0.1
PDA version: G550T1UVU2AQC4
CSC version: G550T1TMK2AQC4
Phone version: G550T1UVU2AQC4
Product code: SM2G550TZWATMK
CSC country code: USA
CSC sales code: TMK
Phone SN: RV8J210RXPV
IMEI: 35460xxxxxxxxxx
HW version: REV0.4
RF cal date: 20170217
Chip name: EXYNOS3475
Modem board: SHANNON308
Security patch: 2017-03-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: F3 A5 3C E5 AA A6 48 86 02 59 C1 94 36 F2 77 0E
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.32.4

orhan5 · 06-07-2018, 09:25

Selected model: E1270
Selected port: COM5 USB Serial Port
Selected port speed: 921600
Waiting phone... detected COM21
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI Master: 5200900000000000
Phone HW: MP 0.700
Product code:
Sending NV... OK
Unlock done
Done with Samsung Tool v.19.1

mario2012 · 06-07-2018, 09:47

galaxy s7 active G891a At&T unlock ok via server
Checking Login and Password... OK
Ballance: 10 crd.
You have 10 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G891A
Android version: 7.0
PDA version: G891AUCU2BRB5
CSC version: G891AATT2BRB5
Phone version: G891AUCU2BRB5
Product code: SM-G891AZAAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38H60RVH0F
IMEI: 351713081418587
HW version: REV0.5
RF cal date: 2016.06.25
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2018-01-01
Boot Warranty bit: 0
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM22 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 42463509
NET lock: 27149202
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.32.6

orhan5 · 06-07-2018, 10:23

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.

Operation: Repair
Selected model: SM-J100Y
Software version: 31.1

If you are looking for 'Repair Network' function then you should use 'Patch Certificate'

Waiting ADB device... OK
Reading phone info...
Model: SM-J100Y
Android version: 4.4.4
Product code: SM-J100YZWAXSA
Phone version: J100YDXU0AOC1
PDA version: J100YDXU0AQB1
CSC version: J100YXSA0AQB1
CSC country code: Australia
CSC sales code: XSA
HW version: MP 0.100
Phone SN: R28G72ZVVBF
Modem board:
Security patch: 2017-02-01
RF cal date: 20150724
IMEI: 3598XXXXXXXXXXX
Checking Super user right... true
Reading NV data... OK
Analyzing SEC file... OK
Writing AT RIL... OK
Initialization AT RIL... OK
Bypass MSL... OK
Repairing IMEI... OK
Rebooting phone... OK
Repair done

Done with Samsung Tool PRO v.31.1

orhan5 · 06-07-2018, 10:24

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.

Operation: Patch Certificate
Selected model: SM-J100Y
Software version: 31.1

Waiting ADB device... OK
Reading phone info...
Model: SM-J100Y
Android version: 4.4.4
Product code: SM-J100YZWAXSA
Phone version: J100YDXU0AOC1
PDA version: J100YDXU0AQB1
CSC version: J100YXSA0AQB1
CSC country code: Australia
CSC sales code: XSA
HW version: MP 0.100
Phone SN: R28G72ZVVBF
Modem board:
Security patch: 2017-02-01
RF cal date: 20150724
IMEI: 35983xxxxxxxxx
Checking Super user right... true
Patching CERT check... OK
Detecting MODEM... OK
Reading modem... OK
Patching modem... OK
Writing modem... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.31.1

orhan5 · 06-08-2018, 15:10

UNLOCK INSTRUCTIONS:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.

To reset Google account activation or Samsung reactivation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Unlock
Selected model: SM-J320H
Software version: 32.6

Searching Samsung modem... detected COM47
Reading phone info...
Model: SM-J320H
AP version: J320HXXU0AQK1
CSC version: J320HOXE0AQK1
CP version: J320HXXU0AQK1
Product code: SM-J320HZKDCAC
Phone SN: R51K4012WFW
IMEI: 35481XXXXXX3335
IMEI2: 35481XXXXXXX333
Unique number: C8G0134CB40AA25
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.32.6

EjazATF · 06-08-2018, 17:05

SM-G570F
FRP Removed Using Calculator Method

Code:

Operation: Reset FRP
Selected model: SM-G570F
Software version: 32.6

You must activate ADB before reset FRP  Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G570F
Android version: 7.0
PDA version: G570FXXU1BQL2
CSC version: G570FOJV1BQL2
Phone version: G570FXXU1BQI6
Product code: SM-G570FZDDPAK
CSC country code: PAKISTAN
CSC sales code: PAK
Phone SN: R28J23HYJSN
IMEI: 35761xxxxxxxxxxxxxxx
HW version: MP 0.500
RF cal date: 20170225
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2017-12-01
Boot Warranty bit: 0
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.32.6

chipscell25 · 06-08-2018, 18:45

Operation: Reset FRP/React/EE
Selected model: SM-J700M
Software version: 32.6

Searching Samsung USB Flash interface... COM3 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.32.6

chipscell25 · 06-08-2018, 19:51

Operation: Unlock
Selected model: SM-J700M
Software version: 32.7

Waiting ADB device... OK
Reading phone info...
Model: SM-J700M
Android version: 6.0.1
PDA version: J700MUBS2BQEC
CSC version: J700MUWA2BPL2
Phone version: J700MUBS2BQB2
Product code: SM-J700MZKACDR
CSC country code: Dominican Republic
CSC sales code: CDR
Phone SN: R28H830ZJZF
IMEI: 35170xxxxxxxxxx
HW version: MP 0.700
RF cal date: 20160824
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-05-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.32.7

06-06-2018, 09:28	#20657 (permalink)
Arafat Mashaka No Life Poster Join Date: Apr 2008 Location: Burundi Bujumbura Posts: 740 Member: 750759 Status: Offline Sonork: 75101010 Thanks Meter: 169	samsung Note5 N920C Reset FRP done Operation: Reset FRP UFS Selected model: SM-N920C Selected port: COM11 USB Serial Port Software version: 32.4 Hold 'Vol down' and press 'POWER ON' for 2-3 seconds Checking phone at COM11 OK Phone detected, do not release 'Vol down' Reading data from phone... OK Release 'Vol down' now Comparing selected model... match (N920C) Setup connection... OK Reseting FRP... OK Rebooting phone... OK Reset FRP done Done with Samsung Tool PRO v.32.4

06-06-2018, 11:10	#20658 (permalink)
Arafat Mashaka No Life Poster Join Date: Apr 2008 Location: Burundi Bujumbura Posts: 740 Member: 750759 Status: Offline Sonork: 75101010 Thanks Meter: 169	samsung Note5 N920C Patch cert done Operation: Patch Certificate Selected model: SM-N920C Software version: 32.4 Waiting ADB device... OK Reading phone info... Model: SM-N920C Android version: 7.0 PDA version: N920CXXS4CRC2 CSC version: N920COXE4CRB1 Phone version: N920CXXU4CRB2 Product code: SM-N920CZKASER CSC country code: Russia CSC sales code: SER Phone SN: RF8G91Z9MLP IMEI: 3579250436XXXXX HW version: MP 0.700 RF cal date: 20150919 Chip name: EXYNOS7420 Modem board: SHANNON333 Security patch: 2018-03-01 Boot Warranty bit: 1 Checking Super user right... true Initialization zTool... OK Running zTool, please wait... OK Reading modem... OK Patching modem... OK Writing modem... OK Rebooting phone... OK Patching CERT check... done Done with Samsung Tool PRO v.32.4

06-06-2018, 17:52	#20661 (permalink)
technomak No Life Poster Join Date: Sep 2013 Location: KERALA, INDIA Posts: 1,053 Member: 2035802 Status: Offline Sonork: 100.1675827 Thanks Meter: 789	samsung j250f read codes fails why it fails to read unlock codes of j250f it says server error

06-07-2018, 09:25	#20663 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	Samsung GT-E1207 Sim Lock Done Selected model: E1270 Selected port: COM5 USB Serial Port Selected port speed: 921600 Waiting phone... detected COM21 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Checking NV... OK IMEI Master: 5200900000000000 Phone HW: MP 0.700 Product code: Sending NV... OK Unlock done Done with Samsung Tool v.19.1

06-07-2018, 10:23	#20665 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	SM-J100Y Imei Repair Done REPAIR INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Fill values what you need to repair. 6. Press 'Repair' button. 7. Press 'Patch Certificate' if you have network problem after repairing. Operation: Repair Selected model: SM-J100Y Software version: 31.1 If you are looking for 'Repair Network' function then you should use 'Patch Certificate' Waiting ADB device... OK Reading phone info... Model: SM-J100Y Android version: 4.4.4 Product code: SM-J100YZWAXSA Phone version: J100YDXU0AOC1 PDA version: J100YDXU0AQB1 CSC version: J100YXSA0AQB1 CSC country code: Australia CSC sales code: XSA HW version: MP 0.100 Phone SN: R28G72ZVVBF Modem board: Security patch: 2017-02-01 RF cal date: 20150724 IMEI: 3598XXXXXXXXXXX Checking Super user right... true Reading NV data... OK Analyzing SEC file... OK Writing AT RIL... OK Initialization AT RIL... OK Bypass MSL... OK Repairing IMEI... OK Rebooting phone... OK Repair done Done with Samsung Tool PRO v.31.1

06-06-2018, 06:36	#20656 (permalink)
mr.luckytarun No Life Poster Join Date: Dec 2009 Location: INDIA Age: 36 Posts: 3,135 Member: 1195083 Status: Offline Sonork: QQ:3208821449 Thanks Meter: 1,348	GT-E1200i Unlock Done

06-06-2018, 16:39	#20660 (permalink)
genegilseth Junior Member Join Date: Sep 2012 Location: Central Texas Posts: 1 Member: 1815722 Status: Offline Thanks Meter: 0	After a successful unlock the phone still shows a message saying to Please contact sprint to unlock your device. This comes up under the OMADM Sprint service. Not sure how to get around this. Operation: Unlock Selected model: SM-G935P Software version: 32.4 Waiting ADB device... OK Reading phone info... Model: SM-G950U Android version: 7.0 PDA version: FA70_G950USQU3ARD1 CSC version: Phone version: G950USQU3CRC7 Product code: SM-G950UZKAXAS CSC country code: CSC sales code: Phone SN: R28J61R2C3M IMEI: 355982083645093 HW version: REV1.0 RF cal date: 2017.06.15 Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-02-01 Boot Warranty bit: 0 Incorrect model selected. This may damage your phone. Continue? Yes Writing AT RIL... OK Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.32.4

06-06-2018, 20:44	#20662 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Online Sonork: celular center Thanks Meter: 573	Operation: Unlock Selected model: SM-G550T1 Software version: 32.4 Waiting ADB device... OK Reading phone info... Model: SM-G550T1 Android version: 6.0.1 PDA version: G550T1UVU2AQC4 CSC version: G550T1TMK2AQC4 Phone version: G550T1UVU2AQC4 Product code: SM2G550TZWATMK CSC country code: USA CSC sales code: TMK Phone SN: RV8J210RXPV IMEI: 35460xxxxxxxxxx HW version: REV0.4 RF cal date: 20170217 Chip name: EXYNOS3475 Modem board: SHANNON308 Security patch: 2017-03-01 Boot Warranty bit: 1 Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Initialization data... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: F3 A5 3C E5 AA A6 48 86 02 59 C1 94 36 F2 77 0E Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.32.4

06-07-2018, 09:47	#20664 (permalink)
mario2012 Insane Poster Join Date: Nov 2012 Location: Albania Posts: 88 Member: 1835700 Status: Offline Thanks Meter: 1	galaxy s7 active G891a At&T unlock ok via server Checking Login and Password... OK Ballance: 10 crd. You have 10 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-G891A Android version: 7.0 PDA version: G891AUCU2BRB5 CSC version: G891AATT2BRB5 Phone version: G891AUCU2BRB5 Product code: SM-G891AZAAATT CSC country code: USA CSC sales code: ATT Phone SN: R38H60RVH0F IMEI: 351713081418587 HW version: REV0.5 RF cal date: 2016.06.25 Chip name: MSM8996 Modem board: MSM8996 Security patch: 2018-01-01 Boot Warranty bit: 0 Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM22 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 42463509 NET lock: 27149202 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.32.6

06-07-2018, 10:24	#20666 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	SM-J100Y Patch Certificate D REPAIR INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Fill values what you need to repair. 6. Press 'Repair' button. 7. Press 'Patch Certificate' if you have network problem after repairing. Operation: Patch Certificate Selected model: SM-J100Y Software version: 31.1 Waiting ADB device... OK Reading phone info... Model: SM-J100Y Android version: 4.4.4 Product code: SM-J100YZWAXSA Phone version: J100YDXU0AOC1 PDA version: J100YDXU0AQB1 CSC version: J100YXSA0AQB1 CSC country code: Australia CSC sales code: XSA HW version: MP 0.100 Phone SN: R28G72ZVVBF Modem board: Security patch: 2017-02-01 RF cal date: 20150724 IMEI: 35983xxxxxxxxx Checking Super user right... true Patching CERT check... OK Detecting MODEM... OK Reading modem... OK Patching modem... OK Writing modem... OK Rebooting phone... OK Patching CERT check... done Done with Samsung Tool PRO v.31.1

06-08-2018, 15:10	#20667 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	Unlock done UNLOCK INSTRUCTIONS: 1. Power on the phone. 2. Connect the phone to PC with USB cable. 3. Check Samsung modem in device manager, install drivers if needed. 4. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes. To reset Google account activation or Samsung reactivation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.) Operation: Unlock Selected model: SM-J320H Software version: 32.6 Searching Samsung modem... detected COM47 Reading phone info... Model: SM-J320H AP version: J320HXXU0AQK1 CSC version: J320HOXE0AQK1 CP version: J320HXXU0AQK1 Product code: SM-J320HZKDCAC Phone SN: R51K4012WFW IMEI: 35481XXXXXX3335 IMEI2: 35481XXXXXXX333 Unique number: C8G0134CB40AA25 Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.32.6

06-08-2018, 18:45	#20669 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Online Sonork: celular center Thanks Meter: 573	Operation: Reset FRP/React/EE Selected model: SM-J700M Software version: 32.6 Searching Samsung USB Flash interface... COM3 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.32.6

06-08-2018, 19:51	#20670 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Online Sonork: celular center Thanks Meter: 573	Operation: Unlock Selected model: SM-J700M Software version: 32.7 Waiting ADB device... OK Reading phone info... Model: SM-J700M Android version: 6.0.1 PDA version: J700MUBS2BQEC CSC version: J700MUWA2BPL2 Phone version: J700MUBS2BQB2 Product code: SM-J700MZKACDR CSC country code: Dominican Republic CSC sales code: CDR Phone SN: R28H830ZJZF IMEI: 35170xxxxxxxxxx HW version: MP 0.700 RF cal date: 20160824 Chip name: EXYNOS7580 Modem board: SHANNON310 Security patch: 2017-05-01 Boot Warranty bit: 1 Checking Super user right... true Reading NV data... OK Checking NV data... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.32.7

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29