Post here successfully job with Z3X-BOX Samsung (2018-2022)

[Salman725626]

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Operation: Repair DRK
Selected model: SM-G925F
Software version: 28.2

Checking local file... Ok
Searching server... Ok
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM4 detected
Setup connection... Ok
Reading data from phone... Ok
Sending data to phone... Ok
Sending data to phone... Ok
Waiting ADB device... Ok
Reading phone info...
Recovery build version: 6.0.1
Boot version: G925FXXU5DQD3
Platform: exynos7420
Boot serial: 01157df18a9b6119
Product board: zerolte
Initialization zTool... Ok
Running zTool, please wait...
Start... Ok
Initialization... Ok
Generate and check client proof... Ok
Verify proof by client... Ok
Checking DRK status... NG!
Writing DRK... Ok
Checking DRK status...
Repairing DMVT key... Ok
Rebooting phone... Ok
Repair DRK done

Done with Samsung Tool PRO v.28.2

[nayan sarder]

Operation: Unlock
Selected model: SM-G570Y
Software version: 28.1

Waiting ADB device... Ok
Reading phone info...
Model: SM-G570Y
Android version: 6.0.1
Product code: SM-G570YWDDXME
Phone version: G570YDXU1APK2
PDA version: G570YDXU1APL4
CSC version: G570YOLB1APL2
CSC country code: MALAYSIA
CSC sales code: XME
HW version: MP 0.500
Phone SN: R58J56MDXBA
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2016-12-01
RF cal date: 20170529
IMEI:
Checking Super user right... true
Reading NV data... Ok
Checking NV data... Ok
Reading data... error
Security damaged (4 23)
Initialization zTool... Ok
Running zTool, please wait...
Start... Ok
Initialization... Ok
Generate and check client proof... Ok
Verify proof by client... Ok
Reading data from phone... Ok
Modem board: SHANNON305
HWID: 59 CA 97 6F 95 15 C6 84 E8 8D F8 6B 0A 00 00 00
Calculating... Ok
Unlocking... Ok
Writing NV data... Ok
Rebooting phone... Ok
Unlock done

Done with Samsung Tool PRO v.28.1

[farooquepm]

SAMSUNG S5 G900F
COUNTRY CODE UNLOCKING DONE THANKS SOMUCH Z3X TEAM

[shahid.]

Operation: Unlock
Selected model: SM-G920T
Software version: 28.6

Waiting ADB device... OK
Reading phone info...
Model: SM-G920T
Android version: 7.0
Product code: SM2G920TZWATMB
Phone version: G920TUVU5FQE1
PDA version: G920TUVU5FQE1
CSC version: G920TTMB5FQE1
CSC country code: USA
CSC sales code: TMB
HW version: REV1.0
Phone SN: R58G51D2YWF
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-05-01
RF cal date: 20150520
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 88 11 D1 77 35 04 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.28.6

[hally11]

Originally Posted by shahid.

Operation: Unlock
Selected model: SM-G920T
Software version: 28.6

Waiting ADB device... OK
Reading phone info...
Model: SM-G920T
Android version: 7.0
Product code: SM2G920TZWATMB
Phone version: G920TUVU5FQE1
PDA version: G920TUVU5FQE1
CSC version: G920TTMB5FQE1
CSC country code: USA
CSC sales code: TMB
HW version: REV1.0
Phone SN: R58G51D2YWF
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-05-01
RF cal date: 20150520
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 88 11 D1 77 35 04 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.28.6

can yu plz explain how yu rooted it

[galijus]

  UNLOCK INSTRUCTIONS:
    New Securiry Type:
    Phone must be rooted!
  If the software can't root the phone automatically, 
  then you must root your device manually.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
  6. Press 'Read codes' button and select 'Read codes New' to read security codes.
  
    Old Securiry Type:
  1. Power on the phone.
  2. Connect the phone to PC with USB cable.
  3. Check Samsung modem in device manager, install drivers if needed.
  4. Press 'Unlock' button and select 'Unlock' for direct unlock.
  5. Press 'Read codes' button and select 'Read codes' to read security codes.
  
   To reset Google account activation or Samsung reactivation lock:
  1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
  4. After phone reboot, go to settings and perform factory reset. 

Operation: Unlock
Selected model: SM-G925T
Software version: 28.6

Waiting ADB device... OK
Reading phone info...
Model: SM-G925T
Android version: 7.0
Product code: SM-G925TZKFTMB
Phone version: G925TUVS5FQG1
PDA version: G925TUVS5FQG1
CSC version: G925TTMB5FQG1
CSC country code: USA
CSC sales code: TMB
HW version: REV0.2
Phone SN: R58G31D340V
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-07-01
RF cal date: 20150318
IMEI: 
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID:  08 E7 D4 CF D6 06 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.28.6

Root method here:
https://forum.xda-developers.com/app...mless-t3473445

[celumaster.]

good solution but not so much, because is temporary solution, if you reflash the device with new os, problem appear again...

[patel yogesh]

UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

Operation: Unlock
Selected model: SM-J710F
Software version: 29.0

Waiting ADB device... OK
Reading phone info...
Model: SM-J710F
Android version: 6.0.1
Product code: SM-J710FZKDKSA
Phone version: J710FXXU3AQF5
PDA version: J710FXXS3AQG2
CSC version: J710FOJV3AQD1
CSC country code: KSA
CSC sales code: KSA
HW version: MP 0.300
Phone SN: RF8H71LS9JV
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-07-01
RF cal date: 20160717
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 57 00 00 00 00 00 00 00 00 00 00 00 AA 0E DA D2
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.29.0

[ghacks]

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will apear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

Operation: Read Codes via Server
Selected model: SM-G930A
Selected port: COM669 SAMSUNG Mobile USB Serial Port
Software version: 29.5

Checking Login and Password... OK
Ballance: 15 crd.
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SAMSUNG-SM-G930A
Android version: 7.0
Product code: SM-G930AZKAATT
Phone version: G930AUCS4BQE1
PDA version: G930AUCS4BQE1
CSC version: G930AATT4BQE1
CSC country code: USA
CSC sales code: ATT
HW version: REV0.6
Phone SN: R58J42HZE1L
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2017-05-01
RF cal date: 2017.04.12
IMEI: 35XXXXXXXXXXXXXX
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM5 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 95730636
NET lock: 85020704
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.29.5

[mustafasayad]

Thanks


Searching Samsung USB Flash interface... COM85 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... not supported
Searching EE lock... OK
Erasing EE lock... OK
Reset done
Done with Samsung Tool PRO v.29.5

[ghacks]

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will apear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-N950U
Software version: 29.6

Checking Login and Password... OK
Ballance: 5 crd.
Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 7.1.1
Product code: SM-N950UZKAATT
Phone version: N950USQU1AQIA
PDA version: N950USQU1AQIA
CSC version: N950UOYN1AQIA
CSC country code: USA
CSC sales code: ATT
HW version: REV1.0
Phone SN: R38J906S88B
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-08-01
RF cal date: 2017.09.09
IMEI: 350000000xxxxxxxxxxxx8
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM49 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 83839748
NET lock: 84619693
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.29.6

[iffipower]

plz tell me how did u root or tel me procedure plz

[iffipower]

also want to unlock sprint SM-N950U plz tel me procedure

[THE GREAT ONE]

read codes with server doesn't need root

[ghacks]

Originally Posted by iffipower

also want to unlock sprint SM-N950U plz tel me procedure

root the phone selected model sprint unlock the phone
Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 7.1.1
Product code: SM-N950UZVASPR
Phone version: N950USQU1AQH8
PDA version: FA71_N950USQU1AQH8
CSC version:
CSC country code:
CSC sales code:
HW version: REV1.0
Phone SN: R28J90R2K4T
Modem board: MSM8998
Security patch: 2017-07-01
RF cal date: 2017.09.07
IMEI:
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.29.2

https://mega.nz/#!8TBVQJqJ!VVK8EMogy...bCghyx-0ijrmvU

https://mega.nz/#!cXJGEC4Q!DAHl-s9li...W9UlfvW9Cp8nEo