Post here successfully job with Z3X-BOX Samsung (2018-2022) - Page 7 - GSM-Forum

gtnkais · 11-22-2018, 20:23

hello i have g935F with oreo U3 need to repair imei and patch cert but Z3X not supported yet.
any ohter solution?
and how the combination firmware can resolve the problem
thank you

div_859 · 11-22-2018, 21:21

A605FN unlock done

hecking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A605FN
Android version: 8.0.0
PDA version: A605FNXXU2ARG2
CSC version: A605FNOXM2ARH3
Phone version: A605FNXXU2ARG1
Product code: SM-A605FZKNLUX
CSC country code: Luxembourg
CSC sales code: LUX
Phone SN: R58K935E7SF
IMEI: 351918101366720
HW version: REV0.4B
RF cal date: 2018.09.16
Chip name: SDM450
Modem board: SDM450
Security patch: 2018-07-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM44 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 28171602
NET lock: 18620586
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.34.3

boliargsm · 11-22-2018, 21:21

Checking Login and Password... Listo
Ballance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits.Continue? Si
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-J730F
Android version: 7.0
PDA version: J730FXXU3ARI1
CSC version: J730FLUX3ARI1
Versión del telefono: J730FXXU3ARI1
Código del Producto: SM-J730FZDDLUX
Código de país CSC: Luxembourg
Código de Venta CSC: LUX
Phone SN: R58K60DLWNW
IMEI: 356************
HW version: MP 0.500
RF cal date: 20180605
Chip name: EXYNOS7870
Módem: SHANNON315
Security patch: 2018-09-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED,ABSENT
Buscando servidor... Listo
Checking server answer... Listo
Reiniciando teléfono ... Listo
Waiting for device to become ready... Listo
Initialization zTool... Listo
Running zTool, please wait...
Start... Listo
Initialization... Listo
Generate and check client proof... Listo
Verify proof by client... Listo
Executing... Listo
Lectura de datos desde el teléfono ... Listo
Calculando... Listo
Buscando servidor... Listo
Waiting for server answer... Listo
Congelar código: 16951691
NET lock: 36202839
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
Para comprobar bloquea el estado: *#7465625#
Done with Samsung Tool PRO v.34.2

orhan5 · 11-23-2018, 12:57

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.

Operation: Repair
Selected model: SM-J530F
Software version: 31.1

If you are looking for 'Repair Network' function then you should use 'Patch Certificate'

Waiting ADB device... OK
Reading phone info...
Model: SM-J530F
Android version: 7.0
PDA version: J530FXXU2ARA2
CSC version: J530FVFG2AQL1
Phone version: J530FXXU2ARA2
Product code: SM-J530FZSDVD2
CSC country code: Germany
CSC sales code: VD2
Phone SN: RF8J83BH7GY
IMEI: 35996XXXXXXXXXX
HW version: MP 0.500
RF cal date: 20170827
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-01-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 24 63 A5 19 19 66 85 57 DB 27 F8 05 01 85 92 6C
Calculating... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done

Done with Samsung Tool PRO v.31.1

chipscell25 · 11-23-2018, 14:56

J727P Binary 3 unlock done not root

1- Read SPC

2- ##3424# dm + modem + adb

3- unlock

[ 23/11/2018 09:37:34 a.m ]
[ 23/11/2018 09:37:48 a.m ] Operation: Read SPC
[ 23/11/2018 09:37:48 a.m ] Selected model: SM-J727P
[ 23/11/2018 09:37:48 a.m ] Software version: 34.3
[ 23/11/2018 09:37:48 a.m ]
[ 23/11/2018 09:37:49 a.m ] Waiting ADB device... OK
[ 23/11/2018 09:37:50 a.m ] Reading phone info...
[ 23/11/2018 09:37:51 a.m ] Model: SM-J727P
[ 23/11/2018 09:37:51 a.m ] Android version: 7.0
[ 23/11/2018 09:37:51 a.m ] PDA version: J727PVPU3AQJ3
[ 23/11/2018 09:37:51 a.m ] CSC version: J727PSPT3AQJ3
[ 23/11/2018 09:37:52 a.m ] Phone version: J727PVPU3AQJ3
[ 23/11/2018 09:37:52 a.m ] Product code: Not Active
[ 23/11/2018 09:37:52 a.m ] CSC country code: USA
[ 23/11/2018 09:37:53 a.m ] CSC sales code: BST
[ 23/11/2018 09:37:53 a.m ] Phone SN: 00000000000
[ 23/11/2018 09:37:53 a.m ] IMEI: 3535590xxxxxxxx
[ 23/11/2018 09:37:54 a.m ] HW version: J727P.02
[ 23/11/2018 09:37:54 a.m ] RF cal date: 2017.09.30
[ 23/11/2018 09:37:54 a.m ] Chip name: MSM8953
[ 23/11/2018 09:37:55 a.m ] Modem board: MSM8953
[ 23/11/2018 09:37:55 a.m ] Security patch: 2017-08-01
[ 23/11/2018 09:37:55 a.m ] Boot Warranty bit: 0
[ 23/11/2018 09:37:56 a.m ] SIM State: ABSENT
[ 23/11/2018 09:37:59 a.m ] Initialization zTool... OK
[ 23/11/2018 09:38:01 a.m ] Running zTool, please wait...
[ 23/11/2018 09:38:02 a.m ] Start... OK
[ 23/11/2018 09:38:08 a.m ] Initialization... OK
[ 23/11/2018 09:38:12 a.m ] Generate and check client proof... OK
[ 23/11/2018 09:38:12 a.m ] Verify proof by client... OK
[ 23/11/2018 09:38:12 a.m ] Reading data from phone... OK
[ 23/11/2018 09:38:16 a.m ] SPC: 707683
[ 23/11/2018 09:38:16 a.m ]
Operation: Unlock
Selected model: SM-J727P
Software version: 34.3

Waiting ADB device... OK
Reading phone info...
Model: SM-J727P
Android version: 7.0
PDA version: J727PVPU3AQJ3
CSC version: J727PSPT3AQJ3
Phone version: J727PVPU3AQJ3
Product code: Not Active
CSC country code: USA
CSC sales code: BST
Phone SN: 00000000000
IMEI: 3535590xxxxxxxx
HW version: J727P.02
RF cal date: 2017.09.30
Chip name: MSM8953
Modem board: MSM8953
Security patch: 2017-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Searching Samsung diag port... detected COM396
Writing data to phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.34.3

Gambitv01 · 11-23-2018, 20:32

Operation: Write CERT
Selected model: SM-N920T
Software version: 34.3

Waiting ADB device... OK
Reading phone info...
Model: SM-N920T
Android version: 7.0
PDA version: N920TUVS6ERH1
CSC version: N920TTMB6ERH1
Phone version: N920TUVS6ERH1
Product code: SM2N920TZDATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: RF8H21GNWJR
IMEI: 352557073014709
HW version: REV0.2
RF cal date: 20160219
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2018-08-01
Boot Warranty bit: 1
SIM State: NOT_READY
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 68 78 43 F4 D5 06 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Initialization AT RIL...
AT RIL stopped, restarting... OK
Checking for compatible phone and cert
Phone KEY ID: 0448
Checking certificate file... OK
KEY ID: 0448
Crypting CERT 1... OK
Writing NV data... OK
Rebooting phone... OK
Write CERT done
Done with Samsung Tool PRO v.34.3

soltacom · 11-24-2018, 00:13

salem

Operation: Reset FRP
Selected model: SM-G935P
Software version: 34.3

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model:
Android version:
PDA version:
CSC version:
Phone version:
Product code:
CSC country code:
CSC sales code:
Phone SN:
IMEI: 8600*********
HW version:
RF cal date:
Chip name:
Modem board:
Incorrect model selected. This may damage your phone. Continue? Yes
Bypass FRP... OK

Done with Samsung Tool PRO v.34.3

gsmdz · 11-24-2018, 18:43

unlock tmb with server new

Operation: Unlock
Selected model: SM-J727T1
Software version: 34.3

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J727T1
Android version: 7.0
PDA version: J727T1UVS3ARE1
CSC version: J727T1TMK3ARE1
Phone version: J727T1UVS3ARE1
Product code: SM-J727TZKETMK
CSC country code: USA
CSC sales code: TMK
Phone SN: R28K40Z5ERA
IMEI: 354xxxxxxxxxxxxxxxx
HW version: REV0.7
RF cal date: 20180410
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-05-01
Boot Warranty bit: 0
SIM State: ABSENT
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.34.3

SamarMobileZone · 11-24-2018, 20:09

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore or
press 'Write CERT' to restore certificates.

To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
Or use 'Activate Diag' function from 'Repair' tab.
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.

Operation: Write CERT
Selected model: SM-G925V
Software version: 34.3

Checking CERT file... OK
KEY ID: 0449
Waiting ADB device... OK
Reading phone info...
Model: SM-G925V
Android version: 5.1.1
PDA version: G925VVRU4BOG9
CSC version: G925VVZW4BOG9
Phone version: G925VVRU4BOG9
Product code: Not Active
CSC country code: USA
CSC sales code: VZW
Phone SN: R28G33X8PZX
IMEI: 990004854093303
HW version: G925V.04
RF cal date: 2015.03.29
Chip name: EXYNOS7420
Modem board: MDM9635M
Boot Warranty bit: 0
Writing AT RIL... OK
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... OK
Phone KEY ID: 0449
Writing CERT... OK
Checking CERT status... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.34.3

AonMobilles · 11-25-2018, 08:43

Code:

  Reading codes using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
     to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.) 

Operation: Read Codes via Server
Selected model: SM-G950W
Selected port: COM80 SAMSUNG Mobile USB Serial Port 
Software version: 34.3

Checking Login and Password... OK
Ballance: 10 crd.
You have 10 credit(s) left. This operation takes 5 credits.Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G950W
Android version: 8.0.0
PDA version: G950WVLU4BRF5
CSC version: G950WOYA4BRF5
Phone version: G950USQU4CRE1
Product code: SM-G950WZKATLS
CSC country code: Canada
CSC sales code: TLS
Phone SN: R28J83F1DSK
IMEI: 35XXXXXXXXXXXXX
HW version: REV1.0
RF cal date: 2017.08.24
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-06-01
Boot Warranty bit: 0
SIM State: ABSENT
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM11 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 79692526
NET lock: 24939593
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.34.3

suvendurath1 · 11-25-2018, 12:31

samsung j250 network unlock done king z3x...............

RazoR888 · 11-25-2018, 17:01

umarnlw · 11-25-2018, 17:04

Samsung G925t S6 Edge DRK Repair done With Z3X

here are logs

Youtube Link

https://www.youtube.com/watch?v=3-HpSrMHpyU

chipscell25 · 11-26-2018, 15:34

Operation: Reset FRP
Selected model: SM-G610M
Software version: 34.3

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G610M
Android version: 6.0.1
PDA version: G610MUBU1AQG2
CSC version: G610MUWE1AQG2
Phone version: G610MUBU1AQG2
Product code: SM-G610MWDADOR
CSC country code: DOMINICAN REPUBLIC
CSC sales code: DOR
Phone SN: R58J75A6GPY
IMEI: 3577130xxxxxxxx
HW version: MP 0.100
RF cal date: 20170727
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-07-01
Boot Warranty bit: 0
SIM State: READY
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.34.3

boliargsm · 11-26-2018, 19:57

Checking Login and Password... OK
Ballance: 10 crd.
You have 10 credit(s) left. This operation takes 10 credits.Continue? Yes
Searching modem interface... found COM350
Reading data from phone... OK
IMEI: 354************
Checking root rights... OK
Writing zTool... OK
SW Version: K33010l
Initialization zTool... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Initialization zTool... OK
Reading data from phone... OK
Unlocking done
Elapsed: 539 secs. --> (v9.59)

11-22-2018, 21:21	#93 (permalink)
boliargsm No Life Poster Join Date: Oct 2008 Location: Rep Dom Age: 38 Posts: 569 Member: 884906 Status: Offline Sonork: none Thanks Meter: 77	Samsung G730f Read Unlock Codes Done Checking Login and Password... Listo Ballance: 5 crd. You have 5 credit(s) left. This operation takes 5 credits.Continue? Si Waiting ADB device... Listo Leyendo información del teléfono ... Modelo: SM-J730F Android version: 7.0 PDA version: J730FXXU3ARI1 CSC version: J730FLUX3ARI1 Versión del telefono: J730FXXU3ARI1 Código del Producto: SM-J730FZDDLUX Código de país CSC: Luxembourg Código de Venta CSC: LUX Phone SN: R58K60DLWNW IMEI: 356************ HW version: MP 0.500 RF cal date: 20180605 Chip name: EXYNOS7870 Módem: SHANNON315 Security patch: 2018-09-01 Boot Warranty bit: 1 SIM State: NETWORK_LOCKED,ABSENT Buscando servidor... Listo Checking server answer... Listo Reiniciando teléfono ... Listo Waiting for device to become ready... Listo Initialization zTool... Listo Running zTool, please wait... Start... Listo Initialization... Listo Generate and check client proof... Listo Verify proof by client... Listo Executing... Listo Lectura de datos desde el teléfono ... Listo Calculando... Listo Buscando servidor... Listo Waiting for server answer... Listo Congelar código: 16951691 NET lock: 36202839 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 Para comprobar bloquea el estado: *#7465625# Done with Samsung Tool PRO v.34.2

11-23-2018, 12:57	#94 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	SM-J530F Imei Repair Done REPAIR INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Fill values what you need to repair. 6. Press 'Repair' button. 7. Press 'Patch Certificate' if you have network problem after repairing. Operation: Repair Selected model: SM-J530F Software version: 31.1 If you are looking for 'Repair Network' function then you should use 'Patch Certificate' Waiting ADB device... OK Reading phone info... Model: SM-J530F Android version: 7.0 PDA version: J530FXXU2ARA2 CSC version: J530FVFG2AQL1 Phone version: J530FXXU2ARA2 Product code: SM-J530FZSDVD2 CSC country code: Germany CSC sales code: VD2 Phone SN: RF8J83BH7GY IMEI: 35996XXXXXXXXXX HW version: MP 0.500 RF cal date: 20170827 Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2018-01-01 Boot Warranty bit: 1 Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: 24 63 A5 19 19 66 85 57 DB 27 F8 05 01 85 92 6C Calculating... OK Repairing... OK Writing NV data... OK Rebooting phone... OK Repair done Done with Samsung Tool PRO v.31.1

11-24-2018, 00:13	#97 (permalink)
soltacom Freak Poster Join Date: Nov 2011 Location: france Posts: 371 Member: 1690056 Status: Offline Thanks Meter: 103	Hisense c30 qlqum reset frp done salem Operation: Reset FRP Selected model: SM-G935P Software version: 34.3 You must activate ADB before reset FRP Yes Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes Waiting ADB device... OK Reading phone info... Model: Android version: PDA version: CSC version: Phone version: Product code: CSC country code: CSC sales code: Phone SN: IMEI: 8600********* HW version: RF cal date: Chip name: Modem board: Incorrect model selected. This may damage your phone. Continue? Yes Bypass FRP... OK Done with Samsung Tool PRO v.34.3

11-24-2018, 20:09	#99 (permalink)
SamarMobileZone Major Poster Join Date: Apr 2018 Posts: 41 Member: 2832407 Status: Offline Sonork: samarmobilezone Thanks Meter: 14	G925v Cert Write Done.. ;) BACKUP INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read EFS' button to read backup or 'Write EFS' to restore or press 'Write CERT' to restore certificates. To backup/restore QCN, phone diagnostic port must be enabled. 1. Power on the phone. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and select 'DM/DUN over HSIC'. Or use 'Activate Diag' function from 'Repair' tab. 4. Connect the phone to PC with USB cable, install drivers if needed. 5. Select diagnostic port in port settings. 6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore. Operation: Write CERT Selected model: SM-G925V Software version: 34.3 Checking CERT file... OK KEY ID: 0449 Waiting ADB device... OK Reading phone info... Model: SM-G925V Android version: 5.1.1 PDA version: G925VVRU4BOG9 CSC version: G925VVZW4BOG9 Phone version: G925VVRU4BOG9 Product code: Not Active CSC country code: USA CSC sales code: VZW Phone SN: R28G33X8PZX IMEI: 990004854093303 HW version: G925V.04 RF cal date: 2015.03.29 Chip name: EXYNOS7420 Modem board: MDM9635M Boot Warranty bit: 0 Writing AT RIL... OK Initialization AT RIL... OK Bypass MSL... OK Checking for compatible phone and cert... OK Phone KEY ID: 0449 Writing CERT... OK Checking CERT status... OK Rebooting phone... OK Done with Samsung Tool PRO v.34.3

11-25-2018, 12:31	#101 (permalink)
suvendurath1 Freak Poster Join Date: May 2016 Location: INDIA(EGRA,PURBA MEDINIPURE) Posts: 137 Member: 2567557 Status: Offline Sonork: 100.1664271:SUBHENDU Thanks Meter: 54	samsung j250 network unlock done king z3x samsung j250 network unlock done king z3x...............

11-22-2018, 20:23	#91 (permalink)
gtnkais Junior Member Join Date: May 2013 Posts: 20 Member: 1930387 Status: Offline Thanks Meter: 9	hello i have g935F with oreo U3 need to repair imei and patch cert but Z3X not supported yet. any ohter solution? and how the combination firmware can resolve the problem thank you

11-22-2018, 21:21	#92 (permalink)
div_859 Registered User Join Date: Jul 2006 Location: <<SearcH EnginE>> Posts: 1,519 Member: 307373 Status: Offline Sonork: paypal.me/div859 Thanks Meter: 590	A605FN unlock done hecking Login and Password... OK Ballance: 30 crd. You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-A605FN Android version: 8.0.0 PDA version: A605FNXXU2ARG2 CSC version: A605FNOXM2ARH3 Phone version: A605FNXXU2ARG1 Product code: SM-A605FZKNLUX CSC country code: Luxembourg CSC sales code: LUX Phone SN: R58K935E7SF IMEI: 351918101366720 HW version: REV0.4B RF cal date: 2018.09.16 Chip name: SDM450 Modem board: SDM450 Security patch: 2018-07-01 Boot Warranty bit: 0 SIM State: ABSENT,ABSENT Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM44 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 28171602 NET lock: 18620586 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.34.3

11-23-2018, 14:56	#95 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	J727P Binary 3 unlock done not root 1- Read SPC 2- ##3424# dm + modem + adb 3- unlock [ 23/11/2018 09:37:34 a.m ] [ 23/11/2018 09:37:48 a.m ] Operation: Read SPC [ 23/11/2018 09:37:48 a.m ] Selected model: SM-J727P [ 23/11/2018 09:37:48 a.m ] Software version: 34.3 [ 23/11/2018 09:37:48 a.m ] [ 23/11/2018 09:37:49 a.m ] Waiting ADB device... OK [ 23/11/2018 09:37:50 a.m ] Reading phone info... [ 23/11/2018 09:37:51 a.m ] Model: SM-J727P [ 23/11/2018 09:37:51 a.m ] Android version: 7.0 [ 23/11/2018 09:37:51 a.m ] PDA version: J727PVPU3AQJ3 [ 23/11/2018 09:37:51 a.m ] CSC version: J727PSPT3AQJ3 [ 23/11/2018 09:37:52 a.m ] Phone version: J727PVPU3AQJ3 [ 23/11/2018 09:37:52 a.m ] Product code: Not Active [ 23/11/2018 09:37:52 a.m ] CSC country code: USA [ 23/11/2018 09:37:53 a.m ] CSC sales code: BST [ 23/11/2018 09:37:53 a.m ] Phone SN: 00000000000 [ 23/11/2018 09:37:53 a.m ] IMEI: 3535590xxxxxxxx [ 23/11/2018 09:37:54 a.m ] HW version: J727P.02 [ 23/11/2018 09:37:54 a.m ] RF cal date: 2017.09.30 [ 23/11/2018 09:37:54 a.m ] Chip name: MSM8953 [ 23/11/2018 09:37:55 a.m ] Modem board: MSM8953 [ 23/11/2018 09:37:55 a.m ] Security patch: 2017-08-01 [ 23/11/2018 09:37:55 a.m ] Boot Warranty bit: 0 [ 23/11/2018 09:37:56 a.m ] SIM State: ABSENT [ 23/11/2018 09:37:59 a.m ] Initialization zTool... OK [ 23/11/2018 09:38:01 a.m ] Running zTool, please wait... [ 23/11/2018 09:38:02 a.m ] Start... OK [ 23/11/2018 09:38:08 a.m ] Initialization... OK [ 23/11/2018 09:38:12 a.m ] Generate and check client proof... OK [ 23/11/2018 09:38:12 a.m ] Verify proof by client... OK [ 23/11/2018 09:38:12 a.m ] Reading data from phone... OK [ 23/11/2018 09:38:16 a.m ] SPC: 707683 [ 23/11/2018 09:38:16 a.m ] Operation: Unlock Selected model: SM-J727P Software version: 34.3 Waiting ADB device... OK Reading phone info... Model: SM-J727P Android version: 7.0 PDA version: J727PVPU3AQJ3 CSC version: J727PSPT3AQJ3 Phone version: J727PVPU3AQJ3 Product code: Not Active CSC country code: USA CSC sales code: BST Phone SN: 00000000000 IMEI: 3535590xxxxxxxx HW version: J727P.02 RF cal date: 2017.09.30 Chip name: MSM8953 Modem board: MSM8953 Security patch: 2017-08-01 Boot Warranty bit: 0 SIM State: ABSENT Searching Samsung diag port... detected COM396 Writing data to phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.34.3

11-23-2018, 20:32	#96 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	Operation: Write CERT Selected model: SM-N920T Software version: 34.3 Waiting ADB device... OK Reading phone info... Model: SM-N920T Android version: 7.0 PDA version: N920TUVS6ERH1 CSC version: N920TTMB6ERH1 Phone version: N920TUVS6ERH1 Product code: SM2N920TZDATMB CSC country code: USA CSC sales code: TMB Phone SN: RF8H21GNWJR IMEI: 352557073014709 HW version: REV0.2 RF cal date: 20160219 Chip name: EXYNOS7420 Modem board: SHANNON333 Security patch: 2018-08-01 Boot Warranty bit: 1 SIM State: NOT_READY Checking Super user right... true Reading NV data... OK Checking NV data... OK Initialization zTool... OK Running zTool, please wait... OK HWID: 68 78 43 F4 D5 06 00 00 00 00 00 00 00 00 00 00 Calculating... OK Initialization AT RIL... AT RIL stopped, restarting... OK Checking for compatible phone and cert Phone KEY ID: 0448 Checking certificate file... OK KEY ID: 0448 Crypting CERT 1... OK Writing NV data... OK Rebooting phone... OK Write CERT done Done with Samsung Tool PRO v.34.3

11-24-2018, 18:43	#98 (permalink)
gsmdz Registered User Join Date: Dec 2004 Location: algier Posts: 273 Member: 95603 Status: Offline Thanks Meter: 27	unlock tmb with server new Operation: Unlock Selected model: SM-J727T1 Software version: 34.3 Checking Login and Password... OK Ballance: 30 crd. You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-J727T1 Android version: 7.0 PDA version: J727T1UVS3ARE1 CSC version: J727T1TMK3ARE1 Phone version: J727T1UVS3ARE1 Product code: SM-J727TZKETMK CSC country code: USA CSC sales code: TMK Phone SN: R28K40Z5ERA IMEI: 354xxxxxxxxxxxxxxxx HW version: REV0.7 RF cal date: 20180410 Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2018-05-01 Boot Warranty bit: 0 SIM State: ABSENT Searching server... OK Checking server answer... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Executing... OK Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.34.3

11-25-2018, 17:01	#102 (permalink)
RazoR888 Freak Poster Join Date: Sep 2008 Location: Alex_Egypt Posts: 423 Member: 870868 Status: Offline Thanks Meter: 126	TABLET HUAWEI BG2-U01 FRP Done BY Z3X

11-25-2018, 17:04	#103 (permalink)
umarnlw No Life Poster Join Date: Dec 2005 Location: Narowal Posts: 3,317 Member: 207708 Status: Offline Sonork: 100.1602241 Thanks Meter: 1,005	Samsung G925t S6 Edge DRK Repair done With Z3X Samsung G925t S6 Edge DRK Repair done With Z3X here are logs Youtube Link https://www.youtube.com/watch?v=3-HpSrMHpyU

11-26-2018, 15:34	#104 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Reset FRP Selected model: SM-G610M Software version: 34.3 You must activate ADB before reset FRP Yes Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes Waiting ADB device... OK Reading phone info... Model: SM-G610M Android version: 6.0.1 PDA version: G610MUBU1AQG2 CSC version: G610MUWE1AQG2 Phone version: G610MUBU1AQG2 Product code: SM-G610MWDADOR CSC country code: DOMINICAN REPUBLIC CSC sales code: DOR Phone SN: R58J75A6GPY IMEI: 3577130xxxxxxxx HW version: MP 0.100 RF cal date: 20170727 Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2017-07-01 Boot Warranty bit: 0 SIM State: READY Bypass FRP... OK For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.34.3

11-26-2018, 19:57	#105 (permalink)
boliargsm No Life Poster Join Date: Oct 2008 Location: Rep Dom Age: 38 Posts: 569 Member: 884906 Status: Offline Sonork: none Thanks Meter: 77	Lg K330 Unlock Done Checking Login and Password... OK Ballance: 10 crd. You have 10 credit(s) left. This operation takes 10 credits.Continue? Yes Searching modem interface... found COM350 Reading data from phone... OK IMEI: 354************ Checking root rights... OK Writing zTool... OK SW Version: K33010l Initialization zTool... OK Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Initialization zTool... OK Reading data from phone... OK Unlocking done Elapsed: 539 secs. --> (v9.59)