Post here successfully job with Z3X-BOX Samsung (2018-2022) - Page 11 - GSM-Forum

apologized · 12-08-2018, 17:26

Operation: Read Codes via Server
Selected model: SM-A530F
Software version: 34.3

Checking Login and Password... OK
Ballance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A530F
Android version: 8.0.0
PDA version: A530FXXU3BRI1
CSC version:
Phone version: A530FXXU3BRI1
Product code: SM-A530FZKD
CSC country code:
CSC sales code:
Phone SN: R58K51****D
IMEI: 35562409938****
HW version: REV0.3
RF cal date: 20180509
Chip name: EXYNOS7885
Modem board: SHANNON327
Security patch: 2018-09-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 96819469
NET lock: 86838296
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.34.3

al22 · 12-09-2018, 17:00

Code:

[ 09/12/2018 16:28:55 ] Operation: Read Codes
[ 09/12/2018 16:28:55 ] Selected model: SM-J320FN
[ 09/12/2018 16:28:55 ] Software version: 34.3
[ 09/12/2018 16:28:55 ] 
[ 09/12/2018 16:28:57 ] Searching Samsung modem... detected COM45
[ 09/12/2018 16:28:58 ] Reading phone info...
[ 09/12/2018 16:29:00 ] Model: SM-J320FN
[ 09/12/2018 16:29:00 ] AP version: J320FNXXU0AQJ4
[ 09/12/2018 16:29:00 ] CSC version: J320FNOXX0AQI1
[ 09/12/2018 16:29:01 ] CP version: J320FNXXU0AQJ2
[ 09/12/2018 16:29:01 ] Product code: SM-J320FZDNXEF
[ 09/12/2018 16:29:01 ] Phone SN: R58JC04C9QN
[ 09/12/2018 16:29:01 ] IMEI: 353770095596590
[ 09/12/2018 16:29:02 ] Unique number: CQN0039CF0778B4
[ 09/12/2018 16:29:02 ] Reading codes... OK
[ 09/12/2018 16:29:04 ] Please wait, calculating codes... OK (time - 00:00:54)
[ 09/12/2018 16:29:59 ] Freeze code: 29505270
[ 09/12/2018 16:29:59 ] NET lock: 46195275
[ 09/12/2018 16:29:59 ] SUB lock: 00000000
[ 09/12/2018 16:30:00 ] SP lock: 00000000
[ 09/12/2018 16:30:00 ] CP lock: 00000000
[ 09/12/2018 16:30:01 ] SIM lock: 00000000
[ 09/12/2018 16:30:01 ] For check lock status: *#7465625#
[ 09/12/2018 16:30:01 ]

syed tuqeer · 12-10-2018, 10:04

Code:

[ 12/9/2018 7:48:33 PM ] Operation: Flash
[ 12/9/2018 7:48:33 PM ] Selected model: SM-J600F
[ 12/9/2018 7:48:34 PM ] Software version: 34.3
[ 12/9/2018 7:48:34 PM ] 
[ 12/9/2018 7:48:35 PM ] File analysis... OK
[ 12/9/2018 7:48:36 PM ] Total file size: 0x62C051A9 (1580 Mb)
[ 12/9/2018 7:48:37 PM ] Searching USB Flash interface... COM11 detected
[ 12/9/2018 7:48:38 PM ] Setup connection... OK
[ 12/9/2018 7:48:38 PM ] Set PIT file... OK
[ 12/9/2018 7:48:40 PM ] Reading PIT from phone... OK
[ 12/9/2018 7:48:41 PM ] Sending sboot.bin... OK
[ 12/9/2018 7:48:41 PM ] Sending param.bin... OK
[ 12/9/2018 7:48:42 PM ] Sending cm.bin... OK
[ 12/9/2018 7:48:43 PM ] Sending nad_fw.bin... OK
[ 12/9/2018 7:48:44 PM ] Sending nad_refer.bin... OK
[ 12/9/2018 7:48:45 PM ] Sending boot.img... OK
[ 12/9/2018 7:48:46 PM ] Sending recovery.img... OK
[ 12/9/2018 7:48:48 PM ] Sending system.img... OK
[ 12/9/2018 7:49:58 PM ] Sending vendor.img... OK
[ 12/9/2018 7:50:08 PM ] Sending userdata.img... OK
[ 12/9/2018 7:50:15 PM ] Sending modem.bin... OK
[ 12/9/2018 7:50:18 PM ] Sending modem_debug.bin... OK
[ 12/9/2018 7:50:18 PM ] Sending cache.img... OK
[ 12/9/2018 7:50:19 PM ] Sending odm.img... OK
[ 12/9/2018 7:50:23 PM ] Flashing done (time - 00:01:46)
[ 12/9/2018 7:50:23 PM ] 
[ 12/9/2018 7:52:40 PM ] Operation: Info
[ 12/9/2018 7:52:40 PM ] Selected model: SM-J600F
[ 12/9/2018 7:52:40 PM ] Software version: 34.3
[ 12/9/2018 7:52:41 PM ] 
[ 12/9/2018 7:52:41 PM ] Searching Samsung modem... detected COM56
[ 12/9/2018 7:52:44 PM ] Reading phone info...
[ 12/9/2018 7:52:46 PM ] Model: SM-J600F
[ 12/9/2018 7:52:46 PM ] AP version: FA80_J600FXXU1ARE1
[ 12/9/2018 7:52:47 PM ] CSC version: NONE
[ 12/9/2018 7:52:47 PM ] CP version: J600FXXU1ARDC
[ 12/9/2018 7:52:48 PM ] Phone SN: RF8K705TTNV
[ 12/9/2018 7:52:48 PM ] IMEI: 359117092527810
[ 12/9/2018 7:52:49 PM ] IMEI2: 359118092527818
[ 12/9/2018 7:52:49 PM ] Unique number: CBJ0064FC599B55
[ 12/9/2018 7:52:50 PM ] Reading IMEI... OK
[ 12/9/2018 7:52:56 PM ] IMEI: 359117092527810 (SIGN: UNKNOWN)
[ 12/9/2018 7:52:57 PM ] IMEI 2: 359118092527818 (SIGN: UNKNOWN)

syed tuqeer · 12-10-2018, 14:07

Code:

Operation: Flash
Selected model: GT-I9070
Software version: 34.3

File analysis... OK
Total file size: 0x2DF1E525 (735 Mb)
Searching USB Flash interface... COM11 detected
Setup connection... OK
Reading PIT from phone... OK
Sending system.img.md5... OK
Sending kernel.bin.md5... OK
Sending kernel2.bin.md5... OK
Sending normal.bin.md5... OK
Sending modem.bin.md5... OK
Sending power_management.bin.md5... OK
Sending param.lfs.md5... OK
Sending cache.img.md5... OK
Sending hidden.img.md5... OK
Flashing done (time - 00:03:57)

Done with Samsung Tool PRO v.34.3

Arafat Mashaka · 12-11-2018, 07:22

Operation: Read Codes via Server
Selected model: SM-G935A
Selected port: COM8 USB Serial Port
Software version: 34.5

Checking Login and Password... OK
Ballance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G935A
Android version: 8.0.0
PDA version: G935AUCU4CRE4
CSC version: G935AATT4CRE4
Phone version: G935AUCU4CRE4
Product code: SM-G935AZSAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: RF8HA1VREPF
IMEI: 3523310816XXXXX
HW version: REV0.7
RF cal date: 2016.10.19
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2018-04-01
Boot Warranty bit: 0
SIM State: ABSENT
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM11 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 29157374
NET lock: 39750631
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.34.5

fertxter · 12-11-2018, 08:20

J3 2016 ( SM-J320N0 ) Frp Done by Z3x

open Z3x select correct model j320n0
download mode the unit and connect to pc
then click Reset FRP/React/EE

Factory Data Reset

Finish Product

jong2 · 12-12-2018, 10:17

UNLOCK INSTRUCTIONS:
To read security codes using sever:
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-J415F
Selected port: COM36 Z3X BOX Serial Port
Software version: 34.6

Checking Login and Password... OK
Ballance: 50 crd.
You have 50 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J415F
Android version: 8.1.0
PDA version: J415FXXU1ARIM
CSC version: J415FOJM1ARIM
Phone version: J415FXXU1ARIM
Product code: SM-J415FZKFKSA
CSC country code: KSA
CSC sales code: KSA
Phone SN: R58KA1LWA3T
IMEI: 35159210343))))
HW version: REV0.4A
RF cal date: 2018.10.11
Chip name: MSM8917
Modem board: MSM8917
Security patch: 2018-09-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM80 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 95395937
NET lock: 27590270
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

TNX Team

nadim electro · 12-12-2018, 12:35

Waiting ADB device... OK
Reading phone info...
Model: SM-N920T
Android version: 7.0
PDA version: N920TUVU4EQG3
CSC version: N920TTMB4EQG3
Phone version: N920TUVU4EQG3
Product code: SM-N920TZDATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: RF8GB1DLXLA
IMEI: 352557070961530
HW version: REV0.2
RF cal date: 20151114
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-07-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 28 16 7C 8E F7 05 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.33.5

ximasim · 12-12-2018, 12:57

Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-J321AZ
Android version: 6.0.1
PDA version: J321AZTUS3AQD2
CSC version: J321AZAIZ3AQD2
Phone version: J321AZTUS3AQD2
Product code: SM-J321AZDZAIO
CSC country code: USA
CSC sales code: AIO
Phone SN: R28HC213KCV
IMEI: 356518071655873
HW version: REV1.0
RF cal date: 20161217
Chip name: EXYNOS3475
Modem board: SHANNON308
Security patch: 2017-04-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Incorrect model selected. This may damage your phone. Continue? Yes
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data... OK
HWID: 7E CC 3F A1 01 A7 6E C4 0D 1A F6 40 15 92 C8 5E
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.34.6

kondeci91 · 12-12-2018, 15:51

[ 15-Nov-18 10:17:53 AM GT-S5220 Unlock ] Connect phone in flash mode
[ 15-Nov-18 10:17:53 AM GT-S5220 Unlock ] Waiting phone... OK
[ 15-Nov-18 10:18:05 AM GT-S5220 Unlock ] Sending preloader... OK
[ 15-Nov-18 10:18:10 AM GT-S5220 Unlock ] Sending loader... OK
[ 15-Nov-18 10:18:12 AM GT-S5220 Unlock ] Checking Flash ID... OK
[ 15-Nov-18 10:18:13 AM GT-S5220 Unlock ] Detected Flash ID: 003000EC
[ 15-Nov-18 10:18:13 AM GT-S5220 Unlock ] Reading security... OK
[ 15-Nov-18 10:19:54 AM GT-S5220 Unlock ] Patching firmware block... OK
[ 15-Nov-18 10:19:55 AM GT-S5220 Unlock ] Erase Flash... OK
[ 15-Nov-18 10:19:55 AM GT-S5220 Unlock ] Writing security... OK
[ 15-Nov-18 10:19:56 AM GT-S5220 Unlock ] Rebooting phone... OK
[ 15-Nov-18 10:20:28 AM GT-S5220 Unlock ] If phone not powered ON - turn ON phone
[ 15-Nov-18 10:20:29 AM GT-S5220 Unlock ] Searching Samsung modem... detected COM35
[ 15-Nov-18 10:20:30 AM GT-S5220 Unlock ] Reading phone info...
[ 15-Nov-18 10:20:31 AM GT-S5220 Unlock ] Model:
[ 15-Nov-18 10:20:31 AM GT-S5220 Unlock ] Country code:
[ 15-Nov-18 10:20:31 AM GT-S5220 Unlock ] Factory SW:
[ 15-Nov-18 10:20:32 AM GT-S5220 Unlock ] Unique number:
[ 15-Nov-18 10:20:32 AM GT-S5220 Unlock ] Memory phone:
[ 15-Nov-18 10:20:33 AM GT-S5220 Unlock ] SW version: S5220XXLAB/S5220OXELAA
[ 15-Nov-18 10:20:33 AM GT-S5220 Unlock ] IMEI: 35187805265270
[ 15-Nov-18 10:20:34 AM GT-S5220 Unlock ] Waiting for device to become ready... OK
[ 15-Nov-18 10:20:40 AM GT-S5220 Unlock ] Reading SN... OK
[ 15-Nov-18 10:20:40 AM GT-S5220 Unlock ] Phone SN: R21D430KZ5
[ 15-Nov-18 10:20:40 AM GT-S5220 Unlock ] Bypass MSL... OK
[ 15-Nov-18 10:20:41 AM GT-S5220 Unlock ] Unlocking... OK

kondeci91 · 12-12-2018, 15:53

[ 11-Dec-18 3:18:10 PM SM-J330F Read Codes via Server ] Checking Login and Password... OK
[ 11-Dec-18 3:18:12 PM SM-J330F Read Codes via Server ] Ballance: 30 crd.
[ 11-Dec-18 3:18:14 PM SM-J330F Read Codes via Server ] You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
[ 11-Dec-18 3:18:16 PM SM-J330F Read Codes via Server ] Waiting ADB device... OK
[ 11-Dec-18 3:18:18 PM SM-J330F Read Codes via Server ] Reading phone info...
[ 11-Dec-18 3:18:18 PM SM-J330F Read Codes via Server ] Model: SM-J330F
[ 11-Dec-18 3:18:18 PM SM-J330F Read Codes via Server ] Android version: 8.0.0
[ 11-Dec-18 3:18:19 PM SM-J330F Read Codes via Server ] PDA version: J330FXXU3BRG2
[ 11-Dec-18 3:18:19 PM SM-J330F Read Codes via Server ] CSC version: J330FDBT3BRG2
[ 11-Dec-18 3:18:19 PM SM-J330F Read Codes via Server ] Phone version: J330FXXU3BRG3
[ 11-Dec-18 3:18:20 PM SM-J330F Read Codes via Server ] Product code: SM-J330FZDDDBT
[ 11-Dec-18 3:18:20 PM SM-J330F Read Codes via Server ] CSC country code: Germany
[ 11-Dec-18 3:18:20 PM SM-J330F Read Codes via Server ] CSC sales code: DBT
[ 11-Dec-18 3:18:21 PM SM-J330F Read Codes via Server ] Phone SN: R58K72S2E6J
[ 11-Dec-18 3:18:21 PM SM-J330F Read Codes via Server ] IMEI: 358494096438539
[ 11-Dec-18 3:18:22 PM SM-J330F Read Codes via Server ] HW version: MP 0.500
[ 11-Dec-18 3:18:22 PM SM-J330F Read Codes via Server ] RF cal date: 20180717
[ 11-Dec-18 3:18:22 PM SM-J330F Read Codes via Server ] Chip name: EXYNOS7570
[ 11-Dec-18 3:18:23 PM SM-J330F Read Codes via Server ] Modem board: SHANNON305
[ 11-Dec-18 3:18:23 PM SM-J330F Read Codes via Server ] Security patch: 2018-06-01
[ 11-Dec-18 3:18:24 PM SM-J330F Read Codes via Server ] Boot Warranty bit: 0
[ 11-Dec-18 3:18:24 PM SM-J330F Read Codes via Server ] SIM State: NETWORK_LOCKED,ABSENT
[ 11-Dec-18 3:18:28 PM SM-J330F Read Codes via Server ] Initialization zTool... OK
[ 11-Dec-18 3:18:29 PM SM-J330F Read Codes via Server ] Running zTool, please wait... OK
[ 11-Dec-18 3:18:39 PM SM-J330F Read Codes via Server ] Reading data from phone... OK
[ 11-Dec-18 3:18:41 PM SM-J330F Read Codes via Server ] Searching server... OK
[ 11-Dec-18 3:18:44 PM SM-J330F Read Codes via Server ] Checking server answer... OK
[ 11-Dec-18 3:18:45 PM SM-J330F Read Codes via Server ] Executing... OK
[ 11-Dec-18 3:19:28 PM SM-J330F Read Codes via Server ] Reading data from phone... OK
[ 11-Dec-18 3:20:00 PM SM-J330F Read Codes via Server ] Calculating... OK
[ 11-Dec-18 3:20:36 PM SM-J330F Read Codes via Server ] Searching server... OK
[ 11-Dec-18 3:20:56 PM SM-J330F Read Codes via Server ] Waiting for server answer... OK
[ 11-Dec-18 3:21:48 PM SM-J330F Read Codes via Server ] Freeze code: 03604915
[ 11-Dec-18 3:21:48 PM SM-J330F Read Codes via Server ] NET lock: 20861735
[ 11-Dec-18 3:21:49 PM SM-J330F Read Codes via Server ] SUB lock: 00000000
[ 11-Dec-18 3:21:49 PM SM-J330F Read Codes via Server ] SP lock: 00000000
[ 11-Dec-18 3:21:49 PM SM-J330F Read Codes via Server ] CP lock: 00000000
[ 11-Dec-18 3:21:50 PM SM-J330F Read Codes via Server ] SIM lock: 00000000
[ 11-Dec-18 3:21:50 PM SM-J330F Read Codes via Server ] For check lock status: *#7465625#

kondeci91 · 12-12-2018, 15:53

[ 10-Dec-18 1:40:16 PM SM-G930F Reset FRP UFS ] Operation: Reset FRP UFS
[ 10-Dec-18 1:40:16 PM SM-G930F Reset FRP UFS ] Selected model: SM-G930F
[ 10-Dec-18 1:40:16 PM SM-G930F Reset FRP UFS ] Selected port: COM15 Z3X BOX Serial Port
[ 10-Dec-18 1:40:16 PM SM-G930F Reset FRP UFS ] Software version: 34.3
[ 10-Dec-18 1:40:16 PM SM-G930F Reset FRP UFS ]
[ 10-Dec-18 1:40:17 PM SM-G930F Reset FRP UFS ] Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
[ 10-Dec-18 1:40:17 PM SM-G930F Reset FRP UFS ] Checking phone at COM15 OK
[ 10-Dec-18 1:40:19 PM SM-G930F Reset FRP UFS ] Phone detected, do not release 'Vol down'
[ 10-Dec-18 1:40:19 PM SM-G930F Reset FRP UFS ] Reading data from phone... OK
[ 10-Dec-18 1:40:21 PM SM-G930F Reset FRP UFS ] Release 'Vol down' now
[ 10-Dec-18 1:40:25 PM SM-G930F Reset FRP UFS ] Comparing selected model... match (G930F)
[ 10-Dec-18 1:40:25 PM SM-G930F Reset FRP UFS ] Setup connection... OK
[ 10-Dec-18 1:40:25 PM SM-G930F Reset FRP UFS ] Reseting FRP... OK
[ 10-Dec-18 1:40:26 PM SM-G930F Reset FRP UFS ] Rebooting phone... OK
[ 10-Dec-18 1:40:27 PM SM-G930F Reset FRP UFS ] Reset FRP done

jong2 · 12-13-2018, 08:34

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

Operation: Read Codes via Server
Selected model: SM-J510GN
Selected port: COM36 Z3X BOX Serial Port
Software version: 34.6

Checking Login and Password... OK
Ballance: 45 crd.
You have 45 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J510GN
Android version: 7.1.1
PDA version: J510GNDXU2BRC2
CSC version: J510GNOLB2BRC2
Phone version: J510GNDXU2BQL1
Product code: SM-J510GZWUGLB
CSC country code: PHILIPPINES
CSC sales code: GLB
Phone SN: RF8HB362WYK
IMEI: 3531220819]]]]]
HW version: MP 0.300
RF cal date: 2016.11.24
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2018-01-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM80 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 73060804
NET lock: 06196247
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.34.6

Tnx Team

izzicruise · 12-13-2018, 11:57

Succes unlock A520F U7

Code:

Operation: Read Codes via Server
Selected model: SM-A520F
Software version: 34.6

Checking Login and Password... OK
Ballance: 15 crd.
You have 15 credit(s) left. This operation takes 5 credits.Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A520F
Android version: 8.0.0
PDA version: A520FXXS7CRJ8
CSC version: A520FPHN7CRI1
Phone version: A520FXXU7CRH9
Product code: SM-A520FZKAPHN
CSC country code: The Netherlands
CSC sales code: PHN
Phone SN: R58xxx
IMEI: 357987xxxx
HW version: MP 0.401
RF cal date: 20180423
Chip name: EXYNOS7880
Modem board: SHANNON325
Security patch: 2018-10-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 13146257
NET lock: 95295930
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.34.6

suvendurath1 · 12-13-2018, 17:03

SAMSUNG SC03E NETWORK UNLOCK DONE WITH Z3X..............

12-11-2018, 07:22	#155 (permalink)
Arafat Mashaka No Life Poster Join Date: Apr 2008 Location: Burundi Bujumbura Posts: 740 Member: 750759 Status: Offline Sonork: 75101010 Thanks Meter: 169	G935A 8.0 Unlocked Operation: Read Codes via Server Selected model: SM-G935A Selected port: COM8 USB Serial Port Software version: 34.5 Checking Login and Password... OK Ballance: 5 crd. You have 5 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-G935A Android version: 8.0.0 PDA version: G935AUCU4CRE4 CSC version: G935AATT4CRE4 Phone version: G935AUCU4CRE4 Product code: SM-G935AZSAATT CSC country code: USA CSC sales code: ATT Phone SN: RF8HA1VREPF IMEI: 3523310816XXXXX HW version: REV0.7 RF cal date: 2016.10.19 Chip name: MSM8996 Modem board: MSM8996 Security patch: 2018-04-01 Boot Warranty bit: 0 SIM State: ABSENT Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Ramdump interface... COM11 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 29157374 NET lock: 39750631 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.34.5

12-11-2018, 08:20	#156 (permalink)
fertxter Freak Poster Join Date: Jul 2010 Location: Manama Bahrain Posts: 272 Member: 1344255 Status: Offline Sonork: 1659066 Thanks Meter: 131	J3 2016 ( SM-J320N0 ) Frp Done by Z3x J3 2016 ( SM-J320N0 ) Frp Done by Z3x open Z3x select correct model j320n0 download mode the unit and connect to pc then click Reset FRP/React/EE Factory Data Reset Finish Product

12-12-2018, 10:17	#157 (permalink)
jong2 Freak Poster Join Date: Sep 2011 Location: philippines Posts: 385 Member: 1649546 Status: Offline Thanks Meter: 123	Sm-j415f unlock done UNLOCK INSTRUCTIONS: To read security codes using sever: Knox warranty does not matter. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Read Codes via Server Selected model: SM-J415F Selected port: COM36 Z3X BOX Serial Port Software version: 34.6 Checking Login and Password... OK Ballance: 50 crd. You have 50 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-J415F Android version: 8.1.0 PDA version: J415FXXU1ARIM CSC version: J415FOJM1ARIM Phone version: J415FXXU1ARIM Product code: SM-J415FZKFKSA CSC country code: KSA CSC sales code: KSA Phone SN: R58KA1LWA3T IMEI: 35159210343)))) HW version: REV0.4A RF cal date: 2018.10.11 Chip name: MSM8917 Modem board: MSM8917 Security patch: 2018-09-01 Boot Warranty bit: 0 SIM State: ABSENT,ABSENT Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Ramdump interface... COM80 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 95395937 NET lock: 27590270 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# TNX Team

12-12-2018, 12:35	#158 (permalink)
nadim electro No Life Poster Join Date: Oct 2006 Location: pakistan Posts: 669 Member: 361094 Status: Offline Sonork: 100.1597521 Thanks Meter: 172	note5 unlock done Waiting ADB device... OK Reading phone info... Model: SM-N920T Android version: 7.0 PDA version: N920TUVU4EQG3 CSC version: N920TTMB4EQG3 Phone version: N920TUVU4EQG3 Product code: SM-N920TZDATMB CSC country code: USA CSC sales code: TMB Phone SN: RF8GB1DLXLA IMEI: 352557070961530 HW version: REV0.2 RF cal date: 20151114 Chip name: EXYNOS7420 Modem board: SHANNON333 Security patch: 2017-07-01 Boot Warranty bit: 1 Checking Super user right... true Reading NV data... OK Checking NV data... OK Initialization zTool... OK Running zTool, please wait... OK HWID: 28 16 7C 8E F7 05 00 00 00 00 00 00 00 00 00 00 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.33.5

12-12-2018, 12:57	#159 (permalink)
ximasim No Life Poster Join Date: Jul 2014 Location: Nowshera Posts: 878 Member: 2217500 Status: Offline Sonork: 100.1597179 Thanks Meter: 326	J321AZ bit3 unlock done without credit Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-J321AZ Android version: 6.0.1 PDA version: J321AZTUS3AQD2 CSC version: J321AZAIZ3AQD2 Phone version: J321AZTUS3AQD2 Product code: SM-J321AZDZAIO CSC country code: USA CSC sales code: AIO Phone SN: R28HC213KCV IMEI: 356518071655873 HW version: REV1.0 RF cal date: 20161217 Chip name: EXYNOS3475 Modem board: SHANNON308 Security patch: 2017-04-01 Boot Warranty bit: 0 SIM State: NETWORK_LOCKED Incorrect model selected. This may damage your phone. Continue? Yes Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... OK Reading data... OK HWID: 7E CC 3F A1 01 A7 6E C4 0D 1A F6 40 15 92 C8 5E Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.34.6

12-08-2018, 17:26	#151 (permalink)
apologized No Life Poster Join Date: Jan 2012 Location: Morocco Posts: 1,107 Member: 1712203 Status: Offline Thanks Meter: 354	Operation: Read Codes via Server Selected model: SM-A530F Software version: 34.3 Checking Login and Password... OK Ballance: 5 crd. You have 5 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-A530F Android version: 8.0.0 PDA version: A530FXXU3BRI1 CSC version: Phone version: A530FXXU3BRI1 Product code: SM-A530FZKD CSC country code: CSC sales code: Phone SN: R58K51**D IMEI: 35562409938** HW version: REV0.3 RF cal date: 20180509 Chip name: EXYNOS7885 Modem board: SHANNON327 Security patch: 2018-09-01 Boot Warranty bit: 0 SIM State: ABSENT,ABSENT Searching server... OK Checking server answer... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Executing... OK Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 96819469 NET lock: 86838296 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.34.3

12-13-2018, 08:34	#163 (permalink)
jong2 Freak Poster Join Date: Sep 2011 Location: philippines Posts: 385 Member: 1649546 Status: Offline Thanks Meter: 123	SM-J510GN uNLOCK DONE UNLOCK INSTRUCTIONS: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Run dialer and type #0# (service mode will appear). 3. Connect the phone to UART cable, choose correct COM port in port settings. 4. Press 'Unlock' button. 5. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) To reset Google account activation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP' and follow the instructions in program. 5. When process done, press 'Back' on phone and perform factory reset from phone settings. To reset Google account activation or Samsung reactivation lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. 4. After phone reboot, go to settings and perform factory reset. Operation: Read Codes via Server Selected model: SM-J510GN Selected port: COM36 Z3X BOX Serial Port Software version: 34.6 Checking Login and Password... OK Ballance: 45 crd. You have 45 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-J510GN Android version: 7.1.1 PDA version: J510GNDXU2BRC2 CSC version: J510GNOLB2BRC2 Phone version: J510GNDXU2BQL1 Product code: SM-J510GZWUGLB CSC country code: PHILIPPINES CSC sales code: GLB Phone SN: RF8HB362WYK IMEI: 3531220819]]]]] HW version: MP 0.300 RF cal date: 2016.11.24 Chip name: MSM8916 Modem board: MSM8916 Security patch: 2018-01-01 Boot Warranty bit: 0 SIM State: NETWORK_LOCKED,ABSENT Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Ramdump interface... COM80 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 73060804 NET lock: 06196247 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.34.6 Tnx Team

12-13-2018, 17:03	#165 (permalink)
suvendurath1 Freak Poster Join Date: May 2016 Location: INDIA(EGRA,PURBA MEDINIPURE) Posts: 137 Member: 2567557 Status: Offline Sonork: 100.1664271:SUBHENDU Thanks Meter: 54	Samsung sc03e network unlock done SAMSUNG SC03E NETWORK UNLOCK DONE WITH Z3X..............