Post here successfully job with Z3X-BOX Samsung (2018-2022)

[razib143]

UNLOCK INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.

Operation: Unlock
Selected model: SM-T111
Software version: 38.2

Waiting ADB device... OK
Reading phone info...
Model: SM-T111
Android version: 4.2.2
PDA version: T111XXUBOC2
CSC version: T111ODDBOC2
Phone version: T111XXUAOC2
Product code: SM-T111NDWATML
CSC country code: Bangladesh
CSC sales code: TML
Phone SN: RF2F31TBM2D
IMEI: 359701054708599
HW version: MP 0.700
RF cal date: 20140324
Chip name: PXA986
Modem board: PXA986
Checking Super user right... true
Bypass MSL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.38.2

[DUSKnenixs]

Operation: Read Codes
Selected model: SM-G920F
Selected port: COM53 SAMSUNG Mobile USB Serial Port
Software version: 40.0

Waiting ADB device... OK
Reading phone info...
Model: SM-G920F
Android version: 7.0
PDA version: G920FXXU6ERF5
CSC version: G920FOPT6ERF1
Phone version: G920FXXU6ERF6
Product code: SM-G920FZDAOPT
CSC country code: portugal
CSC sales code: OPT
Phone SN: RF8GA2MFV9M
IMEI: 3546070787xxxx
HW version: MP 0.910
RF cal date: 20151030
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2018-06-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: C8 8C 8F ED 0C 04 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Checking hash file... OK
Please wait, calculating codes... OK (time - 00:00:02)
Freeze code: 35060460
NET lock: 08069425
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.40.0

[chipscell25]

Operation: Read Codes
Selected model: SM-J320AZ
Software version: 40.0

Please wait, generating hash codes file, this can take few minutes... OK
Searching Samsung modem... detected COM86
Reading phone info...
Model: SM-J320AZ
AP version: J320AZTUS3AQG1
CSC version: J320AZAIO3AQG1
CP version: J320AZTUS3AQG1
Product code: SM2J320AZWZAIO
Phone SN: R28J106Q21R
IMEI: 3565190xxxxxxxx
Unique number: CQ300F1AEB879B3
Searching Samsung diag port... detected COM85
Reading phone info... OK
CP version: J320AZTUS3AQG1
CP build: Jul 7 2017 14:10:22
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON308
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:12)
Freeze code: 07583026
NET lock: 46174909
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.40.0

[zaya21]

https://www.youtube.com/watch?v=On8PvhwzMyQ

[zaya21]

https://www.youtube.com/watch?v=sC4k8CJGecY

[mughal.zahoor]

REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-G960F
Software version: 40.1

Waiting ADB device... OK
Reading phone info...
Model: SM-G960F
Android version: 10
PDA version: G960FXXU8DTC5
CSC version: G960FOXM8DTC5
Phone version: G960FXXU8DTC5
Product code: SM-G960FZKADBT
CSC country code: Germany
CSC sales code: DBT
Phone SN: R58K2154CJF
IMEI: XXXXXXXXX799736
HW version: MP 0.900
RF cal date: 20180207
Chip name: EXYNOS9810
Modem board: SHANNON360
Security patch: 2020-04-01
Boot Warranty bit: 1
SIM State: ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.40.1




REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-G960F
Software version: 40.1

Waiting ADB device... OK
Reading phone info...
Model: SM-G960F
Android version: 10
PDA version: G960FXXU8DTC5
CSC version: G960FOXM8DTC5
Phone version: G960FXXU8DTC5
Product code: SM-G960FZKADBT
CSC country code: Germany
CSC sales code: DBT
Phone SN: R58K2154CJF
IMEI: XXXXXXXXX792020
HW version: MP 0.900
RF cal date: 20180207
Chip name: EXYNOS9810
Modem board: SHANNON360
Security patch: 2020-04-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.40.1

[zaya21]

https://www.youtube.com/watch?v=VQSKRSRdq2c

[profkefah]

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
6. Press 'Write NV DATA' if you need to restore NV backup.

Operation: Info
Selected model: SM-A105F
Software version: 40.2

Searching Samsung modem... detected COM394
Reading phone info...
Model: SM-A105F
AP version: A105FDDU3ASI6
CSC version: A105FOJM3ASI2
CP version: A105FDDU3ASI2
Product code: MID
Phone SN: RZ8M70M42ZY
IMEI:
IMEI2:
Unique number: CBJ00188742DD56
Reading IMEI... OK
IMEI: (SIGN: NA)
IMEI 2: (SIGN: NA)


BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.
6. Press 'Write NV DATA' if you need to restore NV backup.

Operation: Read EFS
Selected model: SM-A105F
Software version: 40.2

Waiting ADB device... OK
Reading phone info...
Model: SM-A105F
Android version: 9
PDA version: A105FDDU3ASI6
CSC version: A105FOJM3ASI2
Phone version: A105FDDU3ASI2
Product code: SM-A105FZKGMID
CSC country code: Iraq
CSC sales code: MID
Phone SN: RZ8M70M42ZY
IMEI:
HW version: REV0.3
RF cal date: 20190703
Chip name:
Modem board: SHANNON327
Security patch: 2019-09-01
Boot Warranty bit: 1
Checking Super user right... true
Reading EFS from phone... OK
Converting EFS from Ext4 to Img... OK
Saved to C:\Program Files\Z3X\Samsung\SamsungToolPRO\backup\EFS\EFS_SM-A105F_A105FDDU3ASI6__RZ8M70M42ZY_28-5-2020_16-45-29.tar

Done with Samsung Tool PRO v.40.2

[123frp]

Operation: Write CERT
Selected model: SM-A7000
Selected port: COM109 SAMSUNG Mobile USB Serial Port
Software version: 40.1

Checking CERT file... OK
KEY ID: 0599
Waiting ADB device... OK
Reading phone info...
Model: SM-A7000
Android version: 4.4.4
PDA version: A7000ZCU1AOA1
CSC version: A7000CHC1AOA1
Phone version: A7000ZCU1BPB1
Product code: Not Active
CSC country code: China
CSC sales code: CHC
Phone SN: R2XXXXXX
IMEI:
HW version:
RF cal date: NONE
Chip name: MSM8939
Modem board: MSM8939
Boot Warranty bit: 1
Writing AT RIL... OK
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... OK
Phone KEY ID: 0599
Writing CERT... OK
Checking CERT status... OK
Writing Slave CERT... OK
Checking Slave CERT status... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.40.1

[zaya21]

https://www.youtube.com/watch?v=JnFrhxCAEBo


Operation: Read Codes
Selected model: SM-A107M
Software version: 40.1

Checking hash file... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-A107M
Android version: 9
PDA version: A107MUBS4ATC5
CSC version: A107MOWE4ATA7
Phone version: A107MUBS4ATA2
Product code: SM-A107MZKADOR
CSC country code: DOMINICAN REPUBLIC
CSC sales code: DOR
Phone SN: R9WMB17H1HJ
IMEI: 35xxxxxxxxxxx
HW version: MP1.0
RF cal date: 20191123
Chip name: MT6762
Modem board: MT6762
Security patch: 2020-03-01
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM8 detected
Reading data from phone... OK
Please wait, calculating codes... OK (time - 00:00:56)
Freeze code: 05972349
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 85242824
SIM lock: --------
For check lock status: *#7465625#

[fertxter]

Samsung SM-A107F unlock done by Z3x Box

Logs

Please wait, generating hash codes file, this can take few minutes... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-A107F
Android version: 9
PDA version: A107FXXU5ATA9
CSC version: A107FODM5ATA9
Phone version: A107FXXU5ATA8
Product code: SM-A107FZKDINS
CSC country code: India
CSC sales code: INS
Phone SN: R9BMB02QLCJ
IMEI: 3521251Fertxter
HW version: MP1.0
RF cal date: 20191021
Chip name: MT6762
Modem board: MT6762
Security patch: 2020-01-01
SIM State: ABSENT,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM8 detected
Reading data from phone... OK
Please wait, calculating codes... OK (time - 00:00:09)
Freeze code: 02094682
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 39018451
SIM lock: --------
For check lock status: *#7465625#

Done with Samsung Tool PRO v.40.2

[djj007]

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. Choose flash option if needed:
-'Re-write NV' - Warning! This option will erase all calibration data!
-'Single file firmware' - if you have *.pac firmware
3. Press 'Flash' button.
4. Connect the phone in flash mode (Press 'OK' button (Centre of navigation buttons module) and connect USB cable).

Operation: Flash
Selected model: GT-E1200Y
Software version: 40.3

Waiting phone... detected COM19
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Saved to C:\Program Files (x86)\Z3X\Samsung\SamsungToolPRO\backup\NV\nvitem_ GT-E1200Y_2-6-2020_15-45-30.bin
Sending SSBOOT... OK
Sending PS... OK
Sending CSC... OK
Erasing FLASH... OK
Flashing done (time - 00:01:30)

Done with Samsung Tool PRO v.40.3

[jseyedanas]

Operation: Read Codes via Server
Selected model: SM-G955F
Software version: 40.3

Checking Login and Password... OK
Ballance: 35 crd.
You have 35 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G955F
Android version: 9
PDA version: G955FXXS8DTC6
CSC version: G955FOVF8DTC1
Phone version: G955FXXS8DTC1
Product code: SM-G955FZKATCL
CSC country code: Portugal
CSC sales code: TCL
Phone SN: RF8J93NFS7W
IMEI: 35***********33159
HW version: MP 0.501
RF cal date: 20170930
Chip name: EXYNOS8895
Modem board: SHANNON355
Security patch: 2020-04-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 85309408
NET lock: 35041796
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.40.3

[chipscell25]

Operation: Read Codes
Selected model: SM-G532M
Software version: 40.3

Checking hash file... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-G532M
Android version: 6.0.1
PDA version: G532MUMU1APK4
CSC version: G532MUWA1APK3
Phone version: G532MUBU1APK4
Product code: SM-G532MZKACDR
CSC country code: Dominican Republic
CSC sales code: CDR
Phone SN: R58J13T808J
IMEI: 3563750xxxxxxxx
HW version: MP 0.300
RF cal date: 20170117
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2016-11-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM34 detected
Reading data from phone... OK
Please wait, calculating codes... OK (time - 00:00:36)
Freeze code: 79025749
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 74961946
SIM lock: --------
For check lock status: *#7465625#
Done with Samsung Tool PRO v.40.3

[anrmobile]

Operation: Unlock
Selected model: SM-N900T
Selected port: COM114 SAMSUNG Mobile USB Serial Port
Software version: 40.3

Reading phone info...
Reading IMEI... OK
IMEI: 357518057588675
Unlocking... OK
Reseting... OK
Unlock done
Done with Samsung Tool PRO v.40.3