Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1276 - GSM-Forum

frankcelular1 · 09-23-2017, 17:32

Operation: Unlock
Selected model: SM-G920T
Selected port: COM42 Z3X BOX Serial Port
Software version: 29.2

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G920T
Android version: 7.0
Product code: SM2G920TZDATMB
Phone version: G920TUVU5FQG3
PDA version: G920TUVU5FQG3
CSC version: G920TTMB5FQG3
CSC country code: USA
CSC sales code: TMB
HW version: REV1.0
Phone SN: R58G51JVS2M
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-07-01
RF cal date: 20150520
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 88 80 79 6C 74 04 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.29.2

Moody.mood · 09-23-2017, 19:28

Operation: Patch Certificate
Selected model: SM-A510F
Software version: 29.3.1

Waiting ADB device... OK
Reading phone info...
Model: SM-A510F
Android version: 7.0
Product code: SM-A510FZDAITV
Phone version: A510FXXU4CQH2
PDA version: A510FXXU4CQH2
CSC version: A510FOXA4CQH2
CSC country code: ITALY
CSC sales code: ITV
HW version: MP 0.200
Phone SN: RF8J107PHAK
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-08-01
RF cal date: 20170103
IMEI: 357650045xxxxxx
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.29.3.1

Thanks for good support z3x team

wahablepirate · 09-24-2017, 03:00

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.

Operation: Patch Certificate
Selected model: SM-J530F
Software version: 29.3.1

Waiting ADB device... OK
Reading phone info...
Model: SM-J530F
Android version: 7.0
Product code: SM-J530FZDDILO
Phone version: J530FXXU1AQED
PDA version: J530FXWU1AQF1
CSC version: J530FOJK1AQEA
CSC country code: ISRAEL
CSC sales code: ILO
HW version: REV0.5B
Phone SN: R28Jxxxxx
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-06-01
RF cal date: 20170615
IMEI: 357884xxxxxxxx
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.29.3.1

THE FIXCEL · 09-24-2017, 03:11

G930F REPAIR 1M31

If you are looking for 'Reparación de Red' function then you should use 'Parchar Certificado'

Waiting ADB device...
Por favor, permite la depuración USB en el teléfono... Listo
Leyendo información del teléfono ...
Modelo: SM-G930F
Android version: 7.0
Código del Producto: SM-G930FZKLCOM
Versión del telefono: G930FXXU1DQFD
PDA version: G930FXXS1DQHQ
CSC version: G930FCOM1DQFD
Código de país CSC: COLOMBIA
Código de Venta CSC: COM
HW version: MP 0.700
Phone SN: R58H40KT7KR
Chip name: EXYNOS8890
Módem: SHANNON335
Security patch: 2017-08-01
RF cal date: 20160404
IMEI: 35946707XXXXXXX
Verificando derecho de Super Usuario... verdadero
Reading NV data... Listo
Checking NV data... Listo
Reading data... Listo
Detecting MODEM... Listo
Reading MODEM... Listo
Calculando... Listo
Writing zTool... Listo
Initialization zTool... Listo
Running zTool, please wait...
Start... Listo
Initialization... Listo
Generate and check client proof... Listo
Verify proof by client... Listo
Reading data... Listo
HWID: 41 F6 F4 4C 3D 93 1D 6D 58 D8 27 B3 3E DE F8 3D
Calculando... Listo
Reparando... Listo
Writing NV data... Listo
Reiniciando teléfono ... Listo
Reparación listo

orhan5 · 09-24-2017, 11:45

Quote:

Originally Posted by Moody.mood

Operation: Patch Certificate
Selected model: SM-A510F
Software version: 29.3.1

Waiting ADB device... OK
Reading phone info...
Model: SM-A510F
Android version: 7.0
Product code: SM-A510FZDAITV
Phone version: A510FXXU4CQH2
PDA version: A510FXXU4CQH2
CSC version: A510FOXA4CQH2
CSC country code: ITALY
CSC sales code: ITV
HW version: MP 0.200
Phone SN: RF8J107PHAK
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-08-01
RF cal date: 20170103
IMEI: 357650045xxxxxx
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.29.3.1

Thanks for good support z3x team

good work my lord for sucsses and slove problem patch certtificate on 7.0

orhan5 · 09-25-2017, 11:32

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Operation: Patch Certificate
Selected model: SM-G610F
Software version: 29.3.1

Waiting ADB device... OK
Reading phone info...
Model: SM-G610F
Android version: 6.0.1
Product code: SM-G610FZKDTHR
Phone version: G610FDDU1AQF4
PDA version: G610FDDU1AQG2
CSC version: G610FOJV1AQG2
CSC country code: IRAN
CSC sales code: THR
HW version: MP 0.400
Phone SN: R28J82TJAZM
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-07-01
RF cal date: 20170821
IMEI: 3xxxxxxxxxxxxxx
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.29.3.1

orhan5 · 09-25-2017, 11:38

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.

Operation: Repair
Selected model: SM-J200H/DS
Software version: 29.3.1

If you are looking for 'Repair Network' function then you should use 'Patch Certificate'

Waiting ADB device... OK
Reading phone info...
Model: SM-J200H
Android version: 5.1.1
Product code: SM-J200HZKDPAK
Phone version: J200HXXU0APF1
PDA version: J200HXXU0APK1
CSC version: J200HOJV0APK1
CSC country code: PAKISTAN
CSC sales code: PAK
HW version: MP 0.200
Phone SN: RV1J107Y5LE
Modem board: SC7730SE
Security patch: 2016-11-01
RF cal date: 20170116
IMEI: 2515925302514f0
Checking Super user right... true
Checking MSL... OK
Initialization AT RIL... OK
Bypass MSL OK
Repairing IMEI... OK
Repairing Slave IMEI... OK
Rebooting phone... OK
Repair done

Done with Samsung Tool PRO v.29.3.1

orhan5 · 09-25-2017, 11:39

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.

Operation: Patch Certificate
Selected model: SM-J200H/DS
Software version: 29.3.1

Waiting ADB device... OK
Reading phone info...
Model: SM-J200H
Android version: 5.1.1
Product code: SM-J200HZKDPAK
Phone version: J200HXXU0APF1
PDA version: J200HXXU0APK1
CSC version: J200HOJV0APK1
CSC country code: PAKISTAN
CSC sales code: PAK
HW version: MP 0.200
Phone SN: RV1J107Y5LE
Modem board: SC7730SE
Security patch: 2016-11-01
RF cal date: 20170116
IMEI: 2515925302514f0
Checking Super user right... true
Patching CERT check... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.29.3.1

orhan5 · 09-25-2017, 12:00

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore or
press 'Write CERT' to restore certificates.

To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
Or use 'Activate Diag' function from 'Repair' tab.
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.

Operation: Write CERT
Selected model: GT-I9301I
Selected port: COM49 ?SAMSUNG Mobile USB Serial Port
Software version: 29.3.1

Checking CERT file... OK
KEY ID: 0865
Waiting ADB device... OK
Reading phone info...
Model: GT-I9301I
Android version: 4.4.2
Product code: Not Active
Phone version: I9301IXXUANF2
PDA version: I9301IXCUANJ4
CSC version: I9301IOJVUANF1
CSC country code: Kenya
CSC sales code: AFR
HW version:
Phone SN: RV1FB016ZBN
Modem board: MSM8228
RF cal date: NONE
IMEI: 3xxxxxxxxxxxxxx
Writing AT RIL... OK
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... OK
Phone KEY ID: 0865
Writing CERT... OK
Checking CERT status... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.29.3.1

denard · 09-25-2017, 13:34

Operation: Reset FRP/React/EE
Selected model: SM-C9000
Software version: 29.4

Searching Samsung USB Flash interface... COM7 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.29.4

denard · 09-25-2017, 13:35

Operation: Reset FRP/React/EE
Selected model: SM-C9000
Software version: 29.4

Searching Samsung USB Flash interface... COM7 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.29.4

yamanomer · 09-25-2017, 14:09

Code:

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G935F
Android version: 7.0
Product code: SM-G935FEDAPHN
Phone version: G935FXXU1DQD7
PDA version: G935FXXU1DQEF
CSC version: G935FPHN1DQD1
CSC country code: The Netherlands
CSC sales code: PHN
HW version: MP 0.801
Phone SN: RF8H*******
Chip name: EXYNOS8890
Modem board: SHANNON335
Security patch: 2017-05-01
RF cal date: 20160721
IMEI: 35220**********
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... error (1 19)
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... error (0)
Try downgrade modem if possible

Done with Samsung Tool PRO v.29.4

orhan5 · 09-25-2017, 15:17

REPAIR INSTRUCTIONS:
Flash mode:
COM Port does not matter, phone will be detect automatically.
1. Enter and check values that you need to repair.
2. Press 'Repair' button.
3. Connect the phone in flash mode (Press '1' + 'OK' button and connect USB cable).

Normal mode:
1. Connect powered on phone to USB, choose correct COM port in port settings.
2. Enter and check values that you need to repair.
3. Press 'Repair' button.

Operation: Read CERT
Selected model: SM-B350E
Selected port: COM32 ?SCI USB2Serial
Software version: 29.3.1

Waiting phone... detected COM32
Sending FDL... OK
Reconnecting phone... OK
Sending FDL2... OK
Reading NV... OK
Checking NV... OK
IMEI: 3xxxxxxxxxxxxxx
IMEI 2: 3xxxxxxxxxxxxxxxx
Phone HW: MP 0.800
Product code: SM-B350EBKAACRRV
Phone SN: RV1J80GQ26
Certificate file saved to C:\Program Files (x86)\Z3X\Samsung\SamsungToolPRO\backup\Cert\SM-B350E_352701088320590_25-9-2017_17-15-46.cert

Done with Samsung Tool PRO v.29.3.1

orhan5 · 09-25-2017, 15:19

REPAIR INSTRUCTIONS:
Flash mode:
COM Port does not matter, phone will be detect automatically.
1. Enter and check values that you need to repair.
2. Press 'Repair' button.
3. Connect the phone in flash mode (Press '1' + 'OK' button and connect USB cable).

Normal mode:
1. Connect powered on phone to USB, choose correct COM port in port settings.
2. Enter and check values that you need to repair.
3. Press 'Repair' button.

Operation: Repair
Selected model: SM-B350E
Selected port: COM32 ?SCI USB2Serial
Software version: 29.3.1

If you are looking for 'Repair Network' function then you should use 'Patch Certificate'

Waiting phone... detected COM32
Sending FDL... OK
Reconnecting phone... OK
Sending FDL2... OK
Reading NV... OK
Checking NV... OK
IMEI: 3xxxxxxxxxxxxxxx
IMEI 2: 3xxxxxxxxxxxxxxx
Phone HW: MP 0.800
Product code: SM-B350EBKAACRRV
Phone SN: RV1J80GQ26
Sending NV... OK
Repair done

Done with Samsung Tool PRO v.29.3.1

orhan5 · 09-25-2017, 15:30

REPAIR INSTRUCTIONS:
Flash mode:
COM Port does not matter, phone will be detect automatically.
1. Enter and check values that you need to repair.
2. Press 'Repair' button.
3. Connect the phone in flash mode (Press '1' + 'OK' button and connect USB cable).

Normal mode:
1. Connect powered on phone to USB, choose correct COM port in port settings.
2. Enter and check values that you need to repair.
3. Press 'Repair' button.

Operation: Patch Certificate
Selected model: SM-B350E
Selected port: COM32 ?SCI USB2Serial
Software version: 29.3.1

Waiting phone... detected COM32
Sending FDL... OK
Reconnecting phone... OK
Sending FDL2... OK
Reading data from phone ... OK
Writing data to phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.29.3.1

09-23-2017, 17:32	#19126 (permalink)
frankcelular1 No Life Poster Join Date: Dec 2008 Location: just around Posts: 1,779 Member: 914220 Status: Offline Thanks Meter: 206	g920t..7.0 Operation: Unlock Selected model: SM-G920T Selected port: COM42 Z3X BOX Serial Port Software version: 29.2 Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G920T Android version: 7.0 Product code: SM2G920TZDATMB Phone version: G920TUVU5FQG3 PDA version: G920TUVU5FQG3 CSC version: G920TTMB5FQG3 CSC country code: USA CSC sales code: TMB HW version: REV1.0 Phone SN: R58G51JVS2M Chip name: EXYNOS7420 Modem board: SHANNON333 Security patch: 2017-07-01 RF cal date: 20150520 IMEI: Checking Super user right... true Reading NV data... OK Checking NV data... OK Initialization zTool... OK Running zTool, please wait... OK HWID: 88 80 79 6C 74 04 00 00 00 00 00 00 00 00 00 00 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.29.2

09-23-2017, 19:28	#19127 (permalink)
Moody.mood Freak Poster Join Date: Dec 2013 Location: In this world Posts: 133 Member: 2078320 Status: Offline Sonork: 100.1683475 Thanks Meter: 63	A510F patch cert done 7.0 Operation: Patch Certificate Selected model: SM-A510F Software version: 29.3.1 Waiting ADB device... OK Reading phone info... Model: SM-A510F Android version: 7.0 Product code: SM-A510FZDAITV Phone version: A510FXXU4CQH2 PDA version: A510FXXU4CQH2 CSC version: A510FOXA4CQH2 CSC country code: ITALY CSC sales code: ITV HW version: MP 0.200 Phone SN: RF8J107PHAK Chip name: EXYNOS7580 Modem board: SHANNON310 Security patch: 2017-08-01 RF cal date: 20170103 IMEI: 357650045xxxxxx Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Writing zTool... OK Initialization zTool... OK Rebooting phone... OK Patching CERT check... done Done with Samsung Tool PRO v.29.3.1 Thanks for good support z3x team

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29

09-24-2017, 03:00	#19128 (permalink)
wahablepirate No Life Poster Join Date: Sep 2009 Location: BURKINA FASO Posts: 1,001 Member: 1120289 Status: Offline Thanks Meter: 148	REPAIR INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Fill values what you need to repair. 6. Press 'Repair' button. 7. Press 'Patch Certificate' if you have network problem after repairing. Operation: Patch Certificate Selected model: SM-J530F Software version: 29.3.1 Waiting ADB device... OK Reading phone info... Model: SM-J530F Android version: 7.0 Product code: SM-J530FZDDILO Phone version: J530FXXU1AQED PDA version: J530FXWU1AQF1 CSC version: J530FOJK1AQEA CSC country code: ISRAEL CSC sales code: ILO HW version: REV0.5B Phone SN: R28Jxxxxx Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2017-06-01 RF cal date: 20170615 IMEI: 357884xxxxxxxx Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Writing zTool... OK Initialization zTool... OK Rebooting phone... OK Patching CERT check... done Done with Samsung Tool PRO v.29.3.1

09-24-2017, 03:11	#19129 (permalink)
THE FIXCEL Freak Poster Join Date: Feb 2011 Location: colombia Posts: 187 Member: 1514183 Status: Offline Thanks Meter: 33	G930F REPAIR 1M31 If you are looking for 'Reparación de Red' function then you should use 'Parchar Certificado' Waiting ADB device... Por favor, permite la depuración USB en el teléfono... Listo Leyendo información del teléfono ... Modelo: SM-G930F Android version: 7.0 Código del Producto: SM-G930FZKLCOM Versión del telefono: G930FXXU1DQFD PDA version: G930FXXS1DQHQ CSC version: G930FCOM1DQFD Código de país CSC: COLOMBIA Código de Venta CSC: COM HW version: MP 0.700 Phone SN: R58H40KT7KR Chip name: EXYNOS8890 Módem: SHANNON335 Security patch: 2017-08-01 RF cal date: 20160404 IMEI: 35946707XXXXXXX Verificando derecho de Super Usuario... verdadero Reading NV data... Listo Checking NV data... Listo Reading data... Listo Detecting MODEM... Listo Reading MODEM... Listo Calculando... Listo Writing zTool... Listo Initialization zTool... Listo Running zTool, please wait... Start... Listo Initialization... Listo Generate and check client proof... Listo Verify proof by client... Listo Reading data... Listo HWID: 41 F6 F4 4C 3D 93 1D 6D 58 D8 27 B3 3E DE F8 3D Calculando... Listo Reparando... Listo Writing NV data... Listo Reiniciando teléfono ... Listo Reparación listo

09-25-2017, 11:32	#19131 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	REPAIR INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Fill values what you need to repair. 6. Press 'Repair' button. 7. Press 'Patch Certificate' if you have network problem after repairing. 7. Press 'Reset EFS' if you need to reset it. Be carefully, do not perform this without necessity. Backup will be created automatically. Operation: Patch Certificate Selected model: SM-G610F Software version: 29.3.1 Waiting ADB device... OK Reading phone info... Model: SM-G610F Android version: 6.0.1 Product code: SM-G610FZKDTHR Phone version: G610FDDU1AQF4 PDA version: G610FDDU1AQG2 CSC version: G610FOJV1AQG2 CSC country code: IRAN CSC sales code: THR HW version: MP 0.400 Phone SN: R28J82TJAZM Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2017-07-01 RF cal date: 20170821 IMEI: 3xxxxxxxxxxxxxx Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Writing zTool... OK Initialization zTool... OK Rebooting phone... OK Patching CERT check... done Done with Samsung Tool PRO v.29.3.1

09-25-2017, 11:38	#19132 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	REPAIR INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Fill values what you need to repair. 6. Press 'Repair' button. Operation: Repair Selected model: SM-J200H/DS Software version: 29.3.1 If you are looking for 'Repair Network' function then you should use 'Patch Certificate' Waiting ADB device... OK Reading phone info... Model: SM-J200H Android version: 5.1.1 Product code: SM-J200HZKDPAK Phone version: J200HXXU0APF1 PDA version: J200HXXU0APK1 CSC version: J200HOJV0APK1 CSC country code: PAKISTAN CSC sales code: PAK HW version: MP 0.200 Phone SN: RV1J107Y5LE Modem board: SC7730SE Security patch: 2016-11-01 RF cal date: 20170116 IMEI: 2515925302514f0 Checking Super user right... true Checking MSL... OK Initialization AT RIL... OK Bypass MSL OK Repairing IMEI... OK Repairing Slave IMEI... OK Rebooting phone... OK Repair done Done with Samsung Tool PRO v.29.3.1

09-25-2017, 11:39	#19133 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	REPAIR INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Fill values what you need to repair. 6. Press 'Repair' button. Operation: Patch Certificate Selected model: SM-J200H/DS Software version: 29.3.1 Waiting ADB device... OK Reading phone info... Model: SM-J200H Android version: 5.1.1 Product code: SM-J200HZKDPAK Phone version: J200HXXU0APF1 PDA version: J200HXXU0APK1 CSC version: J200HOJV0APK1 CSC country code: PAKISTAN CSC sales code: PAK HW version: MP 0.200 Phone SN: RV1J107Y5LE Modem board: SC7730SE Security patch: 2016-11-01 RF cal date: 20170116 IMEI: 2515925302514f0 Checking Super user right... true Patching CERT check... OK Rebooting phone... OK Patching CERT check... done Done with Samsung Tool PRO v.29.3.1

09-25-2017, 12:00	#19134 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	BACKUP INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read EFS' button to read backup or 'Write EFS' to restore or press 'Write CERT' to restore certificates. To backup/restore QCN, phone diagnostic port must be enabled. 1. Power on the phone. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and select 'DM/DUN over HSIC'. Or use 'Activate Diag' function from 'Repair' tab. 4. Connect the phone to PC with USB cable, install drivers if needed. 5. Select diagnostic port in port settings. 6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore. Operation: Write CERT Selected model: GT-I9301I Selected port: COM49 ?SAMSUNG Mobile USB Serial Port Software version: 29.3.1 Checking CERT file... OK KEY ID: 0865 Waiting ADB device... OK Reading phone info... Model: GT-I9301I Android version: 4.4.2 Product code: Not Active Phone version: I9301IXXUANF2 PDA version: I9301IXCUANJ4 CSC version: I9301IOJVUANF1 CSC country code: Kenya CSC sales code: AFR HW version: Phone SN: RV1FB016ZBN Modem board: MSM8228 RF cal date: NONE IMEI: 3xxxxxxxxxxxxxx Writing AT RIL... OK Initialization AT RIL... OK Bypass MSL... OK Checking for compatible phone and cert... OK Phone KEY ID: 0865 Writing CERT... OK Checking CERT status... OK Rebooting phone... OK Done with Samsung Tool PRO v.29.3.1

09-25-2017, 13:34	#19135 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	Operation: Reset FRP/React/EE Selected model: SM-C9000 Software version: 29.4 Searching Samsung USB Flash interface... COM7 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.29.4

09-25-2017, 13:35	#19136 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	Operation: Reset FRP/React/EE Selected model: SM-C9000 Software version: 29.4 Searching Samsung USB Flash interface... COM7 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.29.4

09-25-2017, 15:17	#19138 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	REPAIR INSTRUCTIONS: Flash mode: COM Port does not matter, phone will be detect automatically. 1. Enter and check values that you need to repair. 2. Press 'Repair' button. 3. Connect the phone in flash mode (Press '1' + 'OK' button and connect USB cable). Normal mode: 1. Connect powered on phone to USB, choose correct COM port in port settings. 2. Enter and check values that you need to repair. 3. Press 'Repair' button. Operation: Read CERT Selected model: SM-B350E Selected port: COM32 ?SCI USB2Serial Software version: 29.3.1 Waiting phone... detected COM32 Sending FDL... OK Reconnecting phone... OK Sending FDL2... OK Reading NV... OK Checking NV... OK IMEI: 3xxxxxxxxxxxxxx IMEI 2: 3xxxxxxxxxxxxxxxx Phone HW: MP 0.800 Product code: SM-B350EBKAACRRV Phone SN: RV1J80GQ26 Certificate file saved to C:\Program Files (x86)\Z3X\Samsung\SamsungToolPRO\backup\Cert\SM-B350E_352701088320590_25-9-2017_17-15-46.cert Done with Samsung Tool PRO v.29.3.1

09-25-2017, 15:19	#19139 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	REPAIR INSTRUCTIONS: Flash mode: COM Port does not matter, phone will be detect automatically. 1. Enter and check values that you need to repair. 2. Press 'Repair' button. 3. Connect the phone in flash mode (Press '1' + 'OK' button and connect USB cable). Normal mode: 1. Connect powered on phone to USB, choose correct COM port in port settings. 2. Enter and check values that you need to repair. 3. Press 'Repair' button. Operation: Repair Selected model: SM-B350E Selected port: COM32 ?SCI USB2Serial Software version: 29.3.1 If you are looking for 'Repair Network' function then you should use 'Patch Certificate' Waiting phone... detected COM32 Sending FDL... OK Reconnecting phone... OK Sending FDL2... OK Reading NV... OK Checking NV... OK IMEI: 3xxxxxxxxxxxxxxx IMEI 2: 3xxxxxxxxxxxxxxx Phone HW: MP 0.800 Product code: SM-B350EBKAACRRV Phone SN: RV1J80GQ26 Sending NV... OK Repair done Done with Samsung Tool PRO v.29.3.1

09-25-2017, 15:30	#19140 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	REPAIR INSTRUCTIONS: Flash mode: COM Port does not matter, phone will be detect automatically. 1. Enter and check values that you need to repair. 2. Press 'Repair' button. 3. Connect the phone in flash mode (Press '1' + 'OK' button and connect USB cable). Normal mode: 1. Connect powered on phone to USB, choose correct COM port in port settings. 2. Enter and check values that you need to repair. 3. Press 'Repair' button. Operation: Patch Certificate Selected model: SM-B350E Selected port: COM32 ?SCI USB2Serial Software version: 29.3.1 Waiting phone... detected COM32 Sending FDL... OK Reconnecting phone... OK Sending FDL2... OK Reading data from phone ... OK Writing data to phone... OK Patching CERT check... done Done with Samsung Tool PRO v.29.3.1