Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1341 - GSM-Forum

chipscell25 · 02-15-2018, 22:55

Operation: Unlock
Selected model: SM-J730G
Software version: 30.8

Waiting ADB device... OK
Reading phone info...
Model: SM-J730G
Android version: 7.0
Product code: SM-J730GZKICDR
Phone version: J730GUBU1AQF3
PDA version: J730GUBU1AQF3
CSC version: J730GUWA1AQF1
CSC country code: Dominican Republic
CSC sales code: CDR
HW version: MP 0.400
Phone SN: R58K114XRME
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-06-01
RF cal date: 20180106
IMEI: 358784xxxxxxxx
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Rebooting phone... OK
Waiting ADB device... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: E0 FC 6B E6 49 AC 07 54 ED 14 3E B8 A8 59 2A A0
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.30.8

wsmobile · 02-16-2018, 07:27

Operation: Read Codes via Server
Selected model: SM-G935A
Software version: 30.8

Checking Login and Password... OK
Ballance: 465 crd.
You have 465 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G935A
Android version: 6.0.1
Product code: SM-G935AZKAATT
Phone version: G935AUCS4APK1
PDA version: G935AUCS4APK1
CSC version: G935AATT4APK1
CSC country code: USA
CSC sales code: ATT
HW version: REV0.7
Phone SN: RF8H615DRXE
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2016-11-01
RF cal date: 2016.06.12
IMEI: 352329080170639
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM9 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 37417179
NET lock: 62914958
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.30.8

taimur-ahmad · 02-16-2018, 12:10

SASMUNG GT-S7562I FLASH DONE

Code:

Operation: Flash
Selected model: GT-S7562I
Software version: 27.7

File analysis... Ok
Total file size: 0x2EB23A4C (747 Mb)
Searching USB Flash interface... COM45 detected
Setup connection... Ok
Reading PIT from phone... Ok
Sending boot.img... Ok
Sending cache.img.ext4... Ok
Sending fat.bin... Ok
Sending hidden.img.ext4... Ok
Sending recovery.img... Ok
Sending system.img.ext4... Ok
Flashing done (time - 00:06:15)

Done with Samsung Tool PRO v.27.7

taimur-ahmad · 02-16-2018, 12:14

SAMSUNG G532G FRP RESET DONE

riznix · 02-16-2018, 12:27

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G935T
Android version: 7.0
Product code: SM-G935TZSATMB
Phone version: G935TUVU4BQH7
PDA version: G935TUVU4BQH7
CSC version: G935TTMB4BQH7
CSC country code: USA
CSC sales code: TMB
HW version: REV0.7
Phone SN: RF8HB2H00GW
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2017-08-01
RF cal date: 2016.11.19
IMEI: 357751076661856
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM104 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.30.8

bhiret · 02-16-2018, 14:11

Operation: Read Codes DIAG
Selected model: SM-G935W8
Selected port: COM5 USB Serial Port
Software version: 30.7

Checking hash file... OK
Searching Samsung modem... detected COM162
Reading phone info... OK
Model: SM-G935W8
AP version: G935W8VLU2BQK4
CSC version: G935W8OYA2BQK4
CP version: G935W8VLU2BQK4
Product code: RWC
Phone SN: RF8H
Unique number: 9885E64B45314A364A
Searching Samsung diag port... detected COM161
Reading phone info... OK
CP version: G935W8VLU2BQK4
CP build: Nov 10 2017 15:59:59
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON335
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:09)
Freeze code: 17519240
NET lock: 64806146
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.30.7

EjazATF · 02-16-2018, 15:53

S7 Edge
FRP Removed via UFS Method

Code:

 Operation: Reset FRP UFS
 Selected model: SM-G935F
 Selected port: COM303 Z3X BOX Serial Port
 Software version: 30.8
 
 Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
 Checking phone at COM303 OK
 Phone detected, do not release 'Vol down'
 Reading data from phone... OK
 Release 'Vol down' now
 Comparing selected model... match (G935F)
 Setup connection... OK
 Reseting FRP... OK
 Rebooting phone... OK
 Reset FRP done

frankcelular1 · 02-16-2018, 23:06

UNLOCK INSTRUCTIONS:
Warning! Knox warranty must be active (0x00)!

1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Type *#0808# and select 'DM + MODEM + ADB' (or 'DM + ACM + ADB').
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Select device in ADB settings.
6. Press 'Unlock TMB via Server' button for direct unlock, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)

Operation: Unlock
Selected model: SM-J327T1
Software version: 30.8

Checking Login and Password... OK
Ballance: 50 crd.
You have 50 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-J327T1
Android version: 7.0
Product code: SM2J327TZKATMK
Phone version: J327T1UVU1AQK6
PDA version: J327T1UVU1AQK6
CSC version: J327T1TMK1AQK6
CSC country code: USA
CSC sales code: TMK
HW version: REV0.1
Phone SN: RV8JB13SJAZ
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2017-11-01
RF cal date: 20171115
IMEI: 352001096159z
Searching Samsung diag port... detected COM94
Reading phone info... OK
CP version: J327T1UVU1AQK6
CP build: Nov 20 2017 14:50:17
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.8

frankcelular1 · 02-16-2018, 23:29

LG 2-3G Tool v9.44
supported models: 1553

Mode: Emergency
Model: LS675
Read info...
Laf Protocol: 01000003
Model name: LGLS675
Software verion: LS675ZV5
Android verion: 5.1.1
Target operator: SPR
Target country: US
Chipset: msm8909
IMEI: 356948071711z
Elapsed: 5 secs. --> (v9.44)

Phone mode is DOWNLOAD
Start reset screen locks...
Laf Protocol: 01000003
Model name: LGLS675
Software verion: LS675ZV5
Android verion: 5.1.1
Target operator: SPR
Target country: US
Chipset: msm8909
IMEI: 356948071711z
Init EXT4 ...
Truncate file 0... not found
Truncate file 1... done
Truncate file 2... done
Truncate file 3... done
Truncate file 4... done
Truncate file 5... done
Save EXT4...
Screen locks removed.
Elapsed: 22 secs. --> (v9.44)

Mode: Emergency
Model: LS675
Read info...
Laf Protocol: 01000003
Model name: LGLS675
Software verion: LS675ZV5
Android verion: 5.1.1
Target operator: SPR
Target country: US
Chipset: msm8909
IMEI: 356948071711z
Elapsed: 3 secs. --> (v9.44)

Phone mode is DOWNLOAD
Start new sprint unlock...
Laf Protocol: 01000003
Model name: LGLS675
Software verion: LS675ZV5
Android verion: 5.1.1
Target operator: SPR
Target country: US
Chipset: msm8909
IMEI: 356948071711z
Init EXT4 /system ...
Detecting sprint type ... using old write method... done
Unlocking...
Init EXT4 /carrier ... done
Unlock done!
Elapsed: 21 secs. --> (v9.44)

MasterFpu$$y · 02-17-2018, 02:28

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available).
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SM-N910A
Selected port: COM92 SAMSUNG Mobile USB Serial Port
Software version: 30.8

Reading phone info...
Reading IMEI... OK
IMEI: 356204064456617
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.30.8

wsmobile · 02-17-2018, 07:42

Operation: Unlock
Selected model: SM-J700T1
Software version: 30.8

Waiting ADB device... OK
Reading phone info...
Model: SM-J700T1
Android version: 6.0.1
Product code: SM2J700TZWATMK
Phone version: J700T1UVS3AQF1
PDA version: J700T1UVS3AQF1
CSC version: J700T1TMK3AQF1
CSC country code: USA
CSC sales code: TMK
HW version: REV0.5
Phone SN: R58H6137EAD
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-06-01
RF cal date: 20160609
IMEI: 357217071700735
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 9B E5 B8 B3 E4 D9 2B 50 9B C8 45 8C 44 B7 F4 C5
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.8

MISHUK_SIKDER · 02-17-2018, 14:29

Operation: Unlock
Selected model: SM-G930T
Software version: 30.7

Checking Login and Password... OK
Ballance: 40 crd.
You have 40 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G930T
Android version: 7.0
Product code: SM-G930TZDATMB
Phone version: G930TUVS4BRA1
PDA version: G930TUVS4BRA1
CSC version: G930TTMB4BRA1
CSC country code: USA
CSC sales code: TMB
HW version: REV0.6
Phone SN: R58H5046Z4P
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2018-01-01
RF cal date: 2016.05.02
IMEI: 3559160732xxxxx
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM55 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.30.7

Bobson Dugnutt · 02-17-2018, 18:17

Operation: Unlock
Selected model: GT-S5830
Selected port: COM48 SAMSUNG Android USB Diagnostic Serial Port (WDM)
Software version: 30.8

Checking phone at COM48
Reading phone info... OK
Model:
Country code:
Cal date:
Factory SW:
Unique number:
Memory phone:
Phone SN: RF2BB88817
PDA/CSC version: S5830XWKPY/S5830XEUKP1
Phone version: S5830XWKPA
Phone HW: MP 0.600
Cal date: 2011.11.10
Reading IMEI... OK
IMEI: 359580049925967
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.30.8

frankcelular1 · 02-17-2018, 18:47

UNLOCK INSTRUCTIONS:
To unlock:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)

To reset Pattern lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset Pattern Lock' button.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' to deactivate Google account activation lock.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Unlock
Selected model: SM-G935T
Selected port: COM6 Z3X BOX Serial Port
Software version: 30.8

Checking Login and Password... OK
Ballance: 40 crd.
You have 40 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G935T
Android version: 6.0.1
Product code: SM-G935TZSATMB
Phone version: G935TUVS3APD8
PDA version: G935TUVS3APD8
CSC version: G935TTMB3APD8
CSC country code: USA
CSC sales code: TMB
HW version: REV0.7
Phone SN: RF8H227VLDP
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2016-05-01
RF cal date: 2016.02.26
IMEI: 357751070713z
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM63 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.8

frankcelular1 · 02-17-2018, 21:38

UNLOCK INSTRUCTIONS:
To unlock:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)

To reset Pattern lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset Pattern Lock' button.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' to deactivate Google account activation lock.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Unlock
Selected model: SM-G935T
Selected port: COM122 SAMSUNG Mobile USB Serial Port
Software version: 30.8

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G935T
Android version: 7.0
Product code: SM-G935TZDATMB
Phone version: G935TUVS4BRA1
PDA version: G935TUVS4BRA1
CSC version: G935TTMB4BRA1
CSC country code: USA
CSC sales code: TMB
HW version: REV0.7
Phone SN: RF8H502SJ6M
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2018-01-01
RF cal date: 2016.05.03
IMEI: 356164072977z
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM132 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.8

02-16-2018, 12:14	#20104 (permalink)
taimur-ahmad Banned Join Date: Oct 2017 Location: pakistan kpk mansehra Age: 26 Posts: 1,273 Member: 2765424 Status: Offline Thanks Meter: 1,039	Samsung g532g frp reset done SAMSUNG G532G FRP RESET DONE

02-16-2018, 23:29	#20109 (permalink)
frankcelular1 No Life Poster Join Date: Dec 2008 Location: just around Posts: 1,779 Member: 914220 Status: Offline Thanks Meter: 206	screen lock and unlock LG 2-3G Tool v9.44 supported models: 1553 Mode: Emergency Model: LS675 Read info... Laf Protocol: 01000003 Model name: LGLS675 Software verion: LS675ZV5 Android verion: 5.1.1 Target operator: SPR Target country: US Chipset: msm8909 IMEI: 356948071711z Elapsed: 5 secs. --> (v9.44) Phone mode is DOWNLOAD Start reset screen locks... Laf Protocol: 01000003 Model name: LGLS675 Software verion: LS675ZV5 Android verion: 5.1.1 Target operator: SPR Target country: US Chipset: msm8909 IMEI: 356948071711z Init EXT4 ... Truncate file 0... not found Truncate file 1... done Truncate file 2... done Truncate file 3... done Truncate file 4... done Truncate file 5... done Save EXT4... Screen locks removed. Elapsed: 22 secs. --> (v9.44) Mode: Emergency Model: LS675 Read info... Laf Protocol: 01000003 Model name: LGLS675 Software verion: LS675ZV5 Android verion: 5.1.1 Target operator: SPR Target country: US Chipset: msm8909 IMEI: 356948071711z Elapsed: 3 secs. --> (v9.44) Phone mode is DOWNLOAD Start new sprint unlock... Laf Protocol: 01000003 Model name: LGLS675 Software verion: LS675ZV5 Android verion: 5.1.1 Target operator: SPR Target country: US Chipset: msm8909 IMEI: 356948071711z Init EXT4 /system ... Detecting sprint type ... using old write method... done Unlocking... Init EXT4 /carrier ... done Unlock done! Elapsed: 21 secs. --> (v9.44)

02-17-2018, 18:17	#20113 (permalink)
Bobson Dugnutt Junior Member Join Date: Dec 2017 Location: Azerbaijan Age: 74 Posts: 24 Member: 2792154 Status: Offline Thanks Meter: 0	Galaxy Ace GT-S5830 Operation: Unlock Selected model: GT-S5830 Selected port: COM48 SAMSUNG Android USB Diagnostic Serial Port (WDM) Software version: 30.8 Checking phone at COM48 Reading phone info... OK Model: Country code: Cal date: Factory SW: Unique number: Memory phone: Phone SN: RF2BB88817 PDA/CSC version: S5830XWKPY/S5830XEUKP1 Phone version: S5830XWKPA Phone HW: MP 0.600 Cal date: 2011.11.10 Reading IMEI... OK IMEI: 359580049925967 Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.30.8

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29

02-15-2018, 22:55	#20101 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Unlock Selected model: SM-J730G Software version: 30.8 Waiting ADB device... OK Reading phone info... Model: SM-J730G Android version: 7.0 Product code: SM-J730GZKICDR Phone version: J730GUBU1AQF3 PDA version: J730GUBU1AQF3 CSC version: J730GUWA1AQF1 CSC country code: Dominican Republic CSC sales code: CDR HW version: MP 0.400 Phone SN: R58K114XRME Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2017-06-01 RF cal date: 20180106 IMEI: 358784xxxxxxxx Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Initialization data... OK Rebooting phone... OK Waiting ADB device... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: E0 FC 6B E6 49 AC 07 54 ED 14 3E B8 A8 59 2A A0 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.8

02-16-2018, 07:27	#20102 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	Operation: Read Codes via Server Selected model: SM-G935A Software version: 30.8 Checking Login and Password... OK Ballance: 465 crd. You have 465 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-G935A Android version: 6.0.1 Product code: SM-G935AZKAATT Phone version: G935AUCS4APK1 PDA version: G935AUCS4APK1 CSC version: G935AATT4APK1 CSC country code: USA CSC sales code: ATT HW version: REV0.7 Phone SN: RF8H615DRXE Chip name: MSM8996 Modem board: MSM8996 Security patch: 2016-11-01 RF cal date: 2016.06.12 IMEI: 352329080170639 Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM9 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 37417179 NET lock: 62914958 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.30.8

02-16-2018, 12:27	#20105 (permalink)
riznix No Life Poster Join Date: Nov 2006 Location: colombo Posts: 791 Member: 399781 Status: Offline Thanks Meter: 94	Checking Login and Password... OK Ballance: 30 crd. You have 30 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G935T Android version: 7.0 Product code: SM-G935TZSATMB Phone version: G935TUVU4BQH7 PDA version: G935TUVU4BQH7 CSC version: G935TTMB4BQH7 CSC country code: USA CSC sales code: TMB HW version: REV0.7 Phone SN: RF8HB2H00GW Chip name: MSM8996 Modem board: MSM8996 Security patch: 2017-08-01 RF cal date: 2016.11.19 IMEI: 357751076661856 Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM104 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Done with Samsung Tool PRO v.30.8

02-16-2018, 14:11	#20106 (permalink)
bhiret No Life Poster Join Date: May 2010 Location: FLAT EARTH Posts: 1,240 Member: 1295624 Status: Offline Thanks Meter: 152	Operation: Read Codes DIAG Selected model: SM-G935W8 Selected port: COM5 USB Serial Port Software version: 30.7 Checking hash file... OK Searching Samsung modem... detected COM162 Reading phone info... OK Model: SM-G935W8 AP version: G935W8VLU2BQK4 CSC version: G935W8OYA2BQK4 CP version: G935W8VLU2BQK4 Product code: RWC Phone SN: RF8H Unique number: 9885E64B45314A364A Searching Samsung diag port... detected COM161 Reading phone info... OK CP version: G935W8VLU2BQK4 CP build: Nov 10 2017 15:59:59 Reading data from phone... OK Reading NV data... OK Modem board: SHANNON335 Checking NV data... OK Calculating... OK Please wait, calculating codes... OK (time - 00:00:09) Freeze code: 17519240 NET lock: 64806146 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.30.7

02-16-2018, 23:06	#20108 (permalink)
frankcelular1 No Life Poster Join Date: Dec 2008 Location: just around Posts: 1,779 Member: 914220 Status: Offline Thanks Meter: 206	UNLOCK INSTRUCTIONS: Warning! Knox warranty must be active (0x00)! 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Type *#0808# and select 'DM + MODEM + ADB' (or 'DM + ACM + ADB'). 4. Connect the phone to PC with USB cable, install drivers if needed. 5. Select device in ADB settings. 6. Press 'Unlock TMB via Server' button for direct unlock, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings) Operation: Unlock Selected model: SM-J327T1 Software version: 30.8 Checking Login and Password... OK Ballance: 50 crd. You have 50 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-J327T1 Android version: 7.0 Product code: SM2J327TZKATMK Phone version: J327T1UVU1AQK6 PDA version: J327T1UVU1AQK6 CSC version: J327T1TMK1AQK6 CSC country code: USA CSC sales code: TMK HW version: REV0.1 Phone SN: RV8JB13SJAZ Chip name: EXYNOS7570 Modem board: SHANNON305 Security patch: 2017-11-01 RF cal date: 20171115 IMEI: 352001096159z Searching Samsung diag port... detected COM94 Reading phone info... OK CP version: J327T1UVU1AQK6 CP build: Nov 20 2017 14:50:17 Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.8

02-17-2018, 02:28	#20110 (permalink)
MasterFpu$$y Freak Poster Join Date: Apr 2016 Location: the boss of samsung Posts: 220 Member: 2558211 Status: Offline Thanks Meter: 90	UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available). 4. Reboot phone. Or use 'Activate Diag' function from 'Repair' tab. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SM-N910A Selected port: COM92 SAMSUNG Mobile USB Serial Port Software version: 30.8 Reading phone info... Reading IMEI... OK IMEI: 356204064456617 Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.30.8

02-17-2018, 07:42	#20111 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	Operation: Unlock Selected model: SM-J700T1 Software version: 30.8 Waiting ADB device... OK Reading phone info... Model: SM-J700T1 Android version: 6.0.1 Product code: SM2J700TZWATMK Phone version: J700T1UVS3AQF1 PDA version: J700T1UVS3AQF1 CSC version: J700T1TMK3AQF1 CSC country code: USA CSC sales code: TMK HW version: REV0.5 Phone SN: R58H6137EAD Chip name: EXYNOS7580 Modem board: SHANNON310 Security patch: 2017-06-01 RF cal date: 20160609 IMEI: 357217071700735 Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: 9B E5 B8 B3 E4 D9 2B 50 9B C8 45 8C 44 B7 F4 C5 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.8

02-17-2018, 14:29	#20112 (permalink)
MISHUK_SIKDER Freak Poster Join Date: Feb 2010 Location: Bangladesh Posts: 140 Member: 1245067 Status: Offline Sonork: 100.1612383 Thanks Meter: 20	Operation: Unlock Selected model: SM-G930T Software version: 30.7 Checking Login and Password... OK Ballance: 40 crd. You have 40 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G930T Android version: 7.0 Product code: SM-G930TZDATMB Phone version: G930TUVS4BRA1 PDA version: G930TUVS4BRA1 CSC version: G930TTMB4BRA1 CSC country code: USA CSC sales code: TMB HW version: REV0.6 Phone SN: R58H5046Z4P Chip name: MSM8996 Modem board: MSM8996 Security patch: 2018-01-01 RF cal date: 2016.05.02 IMEI: 3559160732xxxxx Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM55 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.7

02-17-2018, 18:47	#20114 (permalink)
frankcelular1 No Life Poster Join Date: Dec 2008 Location: just around Posts: 1,779 Member: 914220 Status: Offline Thanks Meter: 206	UNLOCK INSTRUCTIONS: To unlock: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock' button for direct unlock, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings) To reset Pattern lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset Pattern Lock' button. To reset Google account activation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP' to deactivate Google account activation lock. To reset Google account activation or Samsung reactivation lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.) Operation: Unlock Selected model: SM-G935T Selected port: COM6 Z3X BOX Serial Port Software version: 30.8 Checking Login and Password... OK Ballance: 40 crd. You have 40 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G935T Android version: 6.0.1 Product code: SM-G935TZSATMB Phone version: G935TUVS3APD8 PDA version: G935TUVS3APD8 CSC version: G935TTMB3APD8 CSC country code: USA CSC sales code: TMB HW version: REV0.7 Phone SN: RF8H227VLDP Chip name: MSM8996 Modem board: MSM8996 Security patch: 2016-05-01 RF cal date: 2016.02.26 IMEI: 357751070713z Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM63 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.8

02-17-2018, 21:38	#20115 (permalink)
frankcelular1 No Life Poster Join Date: Dec 2008 Location: just around Posts: 1,779 Member: 914220 Status: Offline Thanks Meter: 206	UNLOCK INSTRUCTIONS: To unlock: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock' button for direct unlock, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings) To reset Pattern lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset Pattern Lock' button. To reset Google account activation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP' to deactivate Google account activation lock. To reset Google account activation or Samsung reactivation lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.) Operation: Unlock Selected model: SM-G935T Selected port: COM122 SAMSUNG Mobile USB Serial Port Software version: 30.8 Checking Login and Password... OK Ballance: 30 crd. You have 30 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G935T Android version: 7.0 Product code: SM-G935TZDATMB Phone version: G935TUVS4BRA1 PDA version: G935TUVS4BRA1 CSC version: G935TTMB4BRA1 CSC country code: USA CSC sales code: TMB HW version: REV0.7 Phone SN: RF8H502SJ6M Chip name: MSM8996 Modem board: MSM8996 Security patch: 2018-01-01 RF cal date: 2016.05.03 IMEI: 356164072977z Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM132 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.8