Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1418 - GSM-Forum

GtelBoss · 11-10-2018, 08:01

Searching Samsung modem... detected COM451
Reading phone info...
Model: SM-G930F
AP version: FA60_G930FXXU3ARI2
CSC version: NONE
CP version: G930FXXU3ARI1
Phone SN: R5xxxxxxxx
IMEI: 355xxxxxxxxx
Unique number: CE1116xxxxxx
Reading IMEI... OK
IMEI: 355xxxxxxxxxxx (SIGN: OK)
Reading data from phone... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.34.1

chipscell25 · 11-10-2018, 16:08

Operation: Unlock
Selected model: SM-G550T1
Software version: 34.3

Waiting ADB device... OK
Reading phone info...
Model: SM-G550T1
Android version: 6.0.1
PDA version: G550T1UVU2AQC4
CSC version: G550T1TMK2AQC4
Phone version: G550T1UVU2AQC4
Product code: SM2G550TZWATMK
CSC country code: USA
CSC sales code: TMK
Phone SN: RV8J20SPE1J
IMEI: 35460608xxxxxxx
HW version: REV0.4
RF cal date: 20170214
Chip name: EXYNOS3475
Modem board: SHANNON308
Security patch: 2017-03-01
Boot Warranty bit: 1
SIM State: SIM_SERVICE_PROVIDER_LOCKED
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: B2 B2 5A D9 50 1B 66 25 62 94 11 8B C6 A1 75 21
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.34.3

angellopez · 11-10-2018, 18:39

could not connect to server? unlock help please

chipscell25 · 11-10-2018, 19:47

Operation: Reset FRP/React/EE
Selected model: SM-G550T1
Software version: 34.3

Searching Samsung USB Flash interface... COM16 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.34.3

genci titi 2002 · 11-11-2018, 15:08

Operation: Unlock
Selected model: SM-G925I
Selected port: COM1 Communications Port
Software version: 34.2

Searching Samsung modem... detected COM119
Reading phone info...
Model: SM-G925I
AP version: G925IDVS3EPC1
CSC version: G925IKSA3EPB4
CP version: G925IDVU3EPB2
Product code: SM-G920FZKAXEF
Phone SN: RF8G42DQLGW
IMEI: 359030061927707
Unique number: 04157DF4ACEE2A07
Reading IMEI... OK
IMEI: 359030061927707 (SIGN: OK)
Reading data from phone... OK
Unlocking... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.34.2

nrekram · 11-12-2018, 08:45

SAMSUNG
Android Ver: 8.1.0 FRP bypass, Very Easy Method Without any BOX
https://www.youtube.com/watch?v=KEKC96PkA5c&t=250s

sr8787 · 11-15-2018, 12:21

Samsung Galaxy J2 Ace G532G unlock done

Thanks z3x box team

firuz20101010 · 11-15-2018, 13:16

Selected model: SM-G965U1
Software version: 34.3

Checking Login and Password... OK
Ballance: 20 crd.
You have 20 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G965U1
Android version: 8.0.0
PDA version: G965U1UEU3ARJ2
CSC version: G965U1OYM3ARJ2
Phone version: G965U1UEU3ARJ2
Product code: SM-G965UZBAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38K206MWMT
IMEI: 354641090226229
HW version: REV1.1
RF cal date: 2018.02.18
Chip name: SDM845
Modem board: SDM845
Security patch: 2018-10-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Searching Samsung diag port... not found
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM13 detected
Reading data from phone... OK
Calculating...
Exception: Invalid pointer operation

Done with Samsung Tool PRO v.34.3

firuz20101010 · 11-15-2018, 13:17

whats problem team please help

ghacks · 11-15-2018, 17:10

UNLOCK INSTRUCTIONS:
New Securiry Type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
6. Press 'Read codes' button and select 'Read codes New' to read security codes.

Old Securiry Type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.
5. Press 'Read codes' button and select 'Read codes' to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To read security codes using sever:
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

To reset Google account activation lock with UART cable:
1. Phone must be powered off
2. Connect the phone to UART cable.
3. Select correct COM port in port settings.
4. Press 'Reset FRP UFS' and follow the instructions in program.

Operation: Reset FRP UFS
Selected model: SM-G920T
Selected port: COM8 USB Serial Port
Software version: 34.3

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM8 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G920T)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done

Done with Samsung Tool PRO v.34.3

chipscell25 · 11-15-2018, 20:22

Operation: Unlock
Selected model: SM-J730G
Software version: 34.3

Waiting ADB device... OK
Reading phone info...
Model: SM-J730G
Android version: 7.0
PDA version: J730GUBU4ARF1
CSC version: J730GUWA4ARG1
Phone version: J730GUBU4ARF1
Product code: SM-J730GZDICDR
CSC country code: Dominican Republic
CSC sales code: CDR
Phone SN: R58K33E44VR
IMEI: 358784xxxxxxxx
HW version: MP 0.500
RF cal date: 20180314
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-06-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: B6 F0 26 DD 34 ED 1E 28 39 A8 7E F3 2A 40 DC 34
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.34.3

bright hlatini · 11-16-2018, 11:14

G920F NETWORK UNLOCK DONE

Operation: Unlock
Selected model: SM-G920F
Software version: 34.3

Waiting ADB device... OK
Reading phone info...
Model: SM-G920F
Android version: 7.0
PDA version: G920FXXU5EQAC
CSC version:
Phone version: G920FXXU5BPK2
Product code: SM-G920FZDAVOD
CSC country code:
CSC sales code:
Phone SN:
IMEI: 35XXXXXXXXXXXX
HW version: MP 0.80V
RF cal date: 20150412
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2017-02-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 18 C8 94 6E 54 04 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.34.3

mobile mart · 11-16-2018, 11:56

Operation: Reset FRP UFS
Selected model: SM-G920T
Selected port: COM220 Z3X BOX Serial Port
Software version: 31.1

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM220 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G920T)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done
Done with Samsung Tool PRO v.31.1

nikhil_gsm · 11-16-2018, 16:33

Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 8.0.0
PDA version: N950USQU5CRIA
CSC version: N950UOYN5CRIA
Phone version: N950USQU5CRIA
Product code: SM-N950UZKATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: Rxxxxxxxxxx
IMEI: 3xxxxxxxxxxxxx
HW version: REV1.0
RF cal date: 2017.09.02
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-09-01
Boot Warranty bit: 0
SIM State: ABSENT
Searching Samsung diag port... not found
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM36 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

ernestico911 · 11-16-2018, 16:43

X210APM unlock done

Mode: Normal
Model: LMX210AP
Build version: Jun 4 201818:54:00Dec 21 201705:00:00LMX210AP
SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1
IMEI: 35393409XXXXXX-X
IMEI2: 00000000000000-0
BlueTooth Address: 00:00:01:02:26:00
Phone Code:
Elapsed: 0 secs. --> (v9.58)

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Check adb server status... OK
Checking phone at COM262
Detected ID: 0000100C (MSM8909)
SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1
Reading ESN... OK
Read SPC...
SPC: 000000
Unlock SPC... OK
Backuping RFNV... OK
Backuping Feature Mask... OK
Backuping NV Item... OK
Backuping NV Item SIM1... OK
Backuping NV Item SIM2... OK
Backuping Provisioning Item Files... OK
Phone mode is NORMAL
Switch to DOWNLOAD mode
Phone detected!
Read security zone...
Laf Protocol: 00000001
Model name: LM-X210APM
Software verion: X210APM10c
Android verion: 7.1.2
Target operator: ATT
Target country: US
Chipset: msm8937
IMEI: 353934091XXXXXX
Save part1... done
Save part2... done
Save part3... done
Sec zone saved: ..\Backup\X210APM_353934091XXXXXX_16112018_103216. lgsb1
Detecting write method...
Init write method... fail
Init misc method... fail
Init sign method...
Execute sign method... done
Checking sign method...
Laf cmd info: send LAF_CMD_KILO, retry #1 done
Laf cmd info: send LAF_CMD_KILO, retry #1
Laf cmd info: send LAF_CMD_KILO, retry #1
Laf cmd info: send LAF_CMD_KILO, retry #1
Reboot...
Phone detected!
Reading QCN file... OK
Checking phone at COM262
Detected ID: 0000100C (MSM8909)
SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1
Read SPC...
SPC: 000000
Unlock SPC... OK
Checking paths... OK
Restoring EFS Backup... OK
Restoring NV Items... OK
Restoring NV Item SIM1... OK
Restoring NV Item SIM2... OK
Restoring Provisioning Item Files... OK
Search LG Modem port...
Detected LG Modem port at COM261
Read data from phone...
Check adb server status... OK
Checking adb...
SW Version: X210APM10c
Searching server...
Waiting for server answer...
Unlock done!
Elapsed: 650 secs. --> (v9.58)

11-10-2018, 08:01	#21256 (permalink)
GtelBoss Insane Poster Join Date: Aug 2018 Posts: 94 Member: 2855925 Status: Offline Thanks Meter: 62	g930f u3 unlock done by z3x Searching Samsung modem... detected COM451 Reading phone info... Model: SM-G930F AP version: FA60_G930FXXU3ARI2 CSC version: NONE CP version: G930FXXU3ARI1 Phone SN: R5xxxxxxxx IMEI: 355xxxxxxxxx Unique number: CE1116xxxxxx Reading IMEI... OK IMEI: 355xxxxxxxxxxx (SIGN: OK) Reading data from phone... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.34.1

11-16-2018, 11:56	#21268 (permalink)
mobile mart No Life Poster Join Date: Feb 2008 Posts: 1,080 Member: 696136 Status: Offline Thanks Meter: 210	Samsung G-920T frp reset done. Operation: Reset FRP UFS Selected model: SM-G920T Selected port: COM220 Z3X BOX Serial Port Software version: 31.1 Hold 'Vol down' and press 'POWER ON' for 2-3 seconds Checking phone at COM220 OK Phone detected, do not release 'Vol down' Reading data from phone... OK Release 'Vol down' now Comparing selected model... match (G920T) Setup connection... OK Reseting FRP... OK Rebooting phone... OK Reset FRP done Done with Samsung Tool PRO v.31.1

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29

11-10-2018, 16:08	#21257 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Unlock Selected model: SM-G550T1 Software version: 34.3 Waiting ADB device... OK Reading phone info... Model: SM-G550T1 Android version: 6.0.1 PDA version: G550T1UVU2AQC4 CSC version: G550T1TMK2AQC4 Phone version: G550T1UVU2AQC4 Product code: SM2G550TZWATMK CSC country code: USA CSC sales code: TMK Phone SN: RV8J20SPE1J IMEI: 35460608xxxxxxx HW version: REV0.4 RF cal date: 20170214 Chip name: EXYNOS3475 Modem board: SHANNON308 Security patch: 2017-03-01 Boot Warranty bit: 1 SIM State: SIM_SERVICE_PROVIDER_LOCKED Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Initialization data... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: B2 B2 5A D9 50 1B 66 25 62 94 11 8B C6 A1 75 21 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.34.3

11-10-2018, 18:39	#21258 (permalink)
angellopez Insane Poster Join Date: Nov 2014 Location: peru Posts: 91 Member: 2292956 Status: Offline Thanks Meter: 5	could not connect to server? unlock help please

11-10-2018, 19:47	#21259 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Reset FRP/React/EE Selected model: SM-G550T1 Software version: 34.3 Searching Samsung USB Flash interface... COM16 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.34.3

11-11-2018, 15:08	#21260 (permalink)
genci titi 2002 No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL Posts: 4,182 Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,692	Operation: Unlock Selected model: SM-G925I Selected port: COM1 Communications Port Software version: 34.2 Searching Samsung modem... detected COM119 Reading phone info... Model: SM-G925I AP version: G925IDVS3EPC1 CSC version: G925IKSA3EPB4 CP version: G925IDVU3EPB2 Product code: SM-G920FZKAXEF Phone SN: RF8G42DQLGW IMEI: 359030061927707 Unique number: 04157DF4ACEE2A07 Reading IMEI... OK IMEI: 359030061927707 (SIGN: OK) Reading data from phone... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.34.2

11-12-2018, 08:45	#21261 (permalink)
nrekram Crazy Poster Join Date: Nov 2015 Location: Chittagong Posts: 51 Member: 2491964 Status: Offline Sonork: 100.1672132 Thanks Meter: 21	SAMSUNG Android Ver: 8.1.0 FRP bypass, Very Easy Method Without any BOX https://www.youtube.com/watch?v=KEKC96PkA5c&t=250s

11-15-2018, 12:21	#21262 (permalink)
sr8787 No Life Poster Join Date: Jun 2008 Location: Punjabi University India Posts: 1,473 Member: 788946 Status: Offline Sonork: 100.1682685 Thanks Meter: 502	Samsung Galaxy J2 Ace G532G unlock done Thanks z3x box team

11-15-2018, 13:16	#21263 (permalink)
firuz20101010 Insane Poster Join Date: Aug 2015 Location: samarkand Posts: 67 Member: 2439345 Status: Offline Thanks Meter: 2	Selected model: SM-G965U1 Software version: 34.3 Checking Login and Password... OK Ballance: 20 crd. You have 20 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G965U1 Android version: 8.0.0 PDA version: G965U1UEU3ARJ2 CSC version: G965U1OYM3ARJ2 Phone version: G965U1UEU3ARJ2 Product code: SM-G965UZBAATT CSC country code: USA CSC sales code: ATT Phone SN: R38K206MWMT IMEI: 354641090226229 HW version: REV1.1 RF cal date: 2018.02.18 Chip name: SDM845 Modem board: SDM845 Security patch: 2018-10-01 Boot Warranty bit: 0 SIM State: NETWORK_LOCKED Searching Samsung diag port... not found Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM13 detected Reading data from phone... OK Calculating... Exception: Invalid pointer operation Done with Samsung Tool PRO v.34.3

11-15-2018, 13:17	#21264 (permalink)
firuz20101010 Insane Poster Join Date: Aug 2015 Location: samarkand Posts: 67 Member: 2439345 Status: Offline Thanks Meter: 2	whats problem team please help

11-15-2018, 17:10	#21265 (permalink)
ghacks No Life Poster Join Date: Dec 2009 Location: *** Taste Good Age: 39 Posts: 4,066 Member: 1196914 Status: Offline** Sonork: 100.1667938 Thanks Meter: 1,645	UNLOCK INSTRUCTIONS: New Securiry Type: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock' button and select 'New Unlock' for direct unlock. 6. Press 'Read codes' button and select 'Read codes New' to read security codes. Old Securiry Type: 1. Power on the phone. 2. Connect the phone to PC with USB cable. 3. Check Samsung modem in device manager, install drivers if needed. 4. Press 'Unlock' button and select 'Unlock' for direct unlock. 5. Press 'Read codes' button and select 'Read codes' to read security codes. To read security codes via diagnostic port: 1. Power on the phone. 2. Type *#0808# and select 'DM+MODEM+ADB'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Press 'Read Codes DIAG' button to read security codes. To read security codes using sever: Knox warranty does not matter. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) To reset Google account activation or Samsung reactivation lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. 4. After phone reboot, go to settings and perform factory reset. To reset Google account activation lock with UART cable: 1. Phone must be powered off 2. Connect the phone to UART cable. 3. Select correct COM port in port settings. 4. Press 'Reset FRP UFS' and follow the instructions in program. Operation: Reset FRP UFS Selected model: SM-G920T Selected port: COM8 USB Serial Port Software version: 34.3 Hold 'Vol down' and press 'POWER ON' for 2-3 seconds Checking phone at COM8 OK Phone detected, do not release 'Vol down' Reading data from phone... OK Release 'Vol down' now Comparing selected model... match (G920T) Setup connection... OK Reseting FRP... OK Rebooting phone... OK Reset FRP done Done with Samsung Tool PRO v.34.3

11-15-2018, 20:22	#21266 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Unlock Selected model: SM-J730G Software version: 34.3 Waiting ADB device... OK Reading phone info... Model: SM-J730G Android version: 7.0 PDA version: J730GUBU4ARF1 CSC version: J730GUWA4ARG1 Phone version: J730GUBU4ARF1 Product code: SM-J730GZDICDR CSC country code: Dominican Republic CSC sales code: CDR Phone SN: R58K33E44VR IMEI: 358784xxxxxxxx HW version: MP 0.500 RF cal date: 20180314 Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2018-06-01 Boot Warranty bit: 1 SIM State: NETWORK_LOCKED Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Initialization data... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: B6 F0 26 DD 34 ED 1E 28 39 A8 7E F3 2A 40 DC 34 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.34.3

11-16-2018, 11:14	#21267 (permalink)
bright hlatini No Life Poster Join Date: Jul 2011 Location: malawi Posts: 1,121 Member: 1614640 Status: Offline Thanks Meter: 468	G920F NETWORK UNLOCK DONE Operation: Unlock Selected model: SM-G920F Software version: 34.3 Waiting ADB device... OK Reading phone info... Model: SM-G920F Android version: 7.0 PDA version: G920FXXU5EQAC CSC version: Phone version: G920FXXU5BPK2 Product code: SM-G920FZDAVOD CSC country code: CSC sales code: Phone SN: IMEI: 35XXXXXXXXXXXX HW version: MP 0.80V RF cal date: 20150412 Chip name: EXYNOS7420 Modem board: SHANNON333 Security patch: 2017-02-01 Boot Warranty bit: 1 SIM State: NETWORK_LOCKED Checking Super user right... true Reading NV data... OK Checking NV data... OK Initialization zTool... OK Running zTool, please wait... OK HWID: 18 C8 94 6E 54 04 00 00 00 00 00 00 00 00 00 00 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.34.3

11-16-2018, 16:33	#21269 (permalink)
nikhil_gsm Freak Poster Join Date: Dec 2003 Location: CELLCARE Posts: 272 Member: 47627 Status: Offline Sonork: 100.1596335 Thanks Meter: 124	Waiting ADB device... OK Reading phone info... Model: SM-N950U Android version: 8.0.0 PDA version: N950USQU5CRIA CSC version: N950UOYN5CRIA Phone version: N950USQU5CRIA Product code: SM-N950UZKATMB CSC country code: USA CSC sales code: TMB Phone SN: Rxxxxxxxxxx IMEI: 3xxxxxxxxxxxxx HW version: REV1.0 RF cal date: 2017.09.02 Chip name: MSM8998 Modem board: MSM8998 Security patch: 2018-09-01 Boot Warranty bit: 0 SIM State: ABSENT Searching Samsung diag port... not found Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM36 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Rebooting phone... OK Unlock done

11-16-2018, 16:43	#21270 (permalink)
ernestico911 No Life Poster Join Date: Mar 2013 Location: Cuba Age: 36 Posts: 617 Member: 1892086 Status: Offline Sonork: 1671742 Thanks Meter: 282	X210APM unlock done Mode: Normal Model: LMX210AP Build version: Jun 4 201818:54:00Dec 21 201705:00:00LMX210AP SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1 IMEI: 35393409XXXXXX-X IMEI2: 00000000000000-0 BlueTooth Address: 00:00:01:02:26:00 Phone Code: Elapsed: 0 secs. --> (v9.58) Checking Login and Password... OK Ballance: 30 crd. You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes Check adb server status... OK Checking phone at COM262 Detected ID: 0000100C (MSM8909) SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1 Reading ESN... OK Read SPC... SPC: 000000 Unlock SPC... OK Backuping RFNV... OK Backuping Feature Mask... OK Backuping NV Item... OK Backuping NV Item SIM1... OK Backuping NV Item SIM2... OK Backuping Provisioning Item Files... OK Phone mode is NORMAL Switch to DOWNLOAD mode Phone detected! Read security zone... Laf Protocol: 00000001 Model name: LM-X210APM Software verion: X210APM10c Android verion: 7.1.2 Target operator: ATT Target country: US Chipset: msm8937 IMEI: 353934091XXXXXX Save part1... done Save part2... done Save part3... done Sec zone saved: ..\Backup\X210APM_353934091XXXXXX_16112018_103216. lgsb1 Detecting write method... Init write method... fail Init misc method... fail Init sign method... Execute sign method... done Checking sign method... Laf cmd info: send LAF_CMD_KILO, retry #1 done Laf cmd info: send LAF_CMD_KILO, retry #1 Laf cmd info: send LAF_CMD_KILO, retry #1 Laf cmd info: send LAF_CMD_KILO, retry #1 Reboot... Phone detected! Reading QCN file... OK Checking phone at COM262 Detected ID: 0000100C (MSM8909) SW Version: MPSS.JO.3.0.c8-00004-8937_GENNS_PACK-1 Read SPC... SPC: 000000 Unlock SPC... OK Checking paths... OK Restoring EFS Backup... OK Restoring NV Items... OK Restoring NV Item SIM1... OK Restoring NV Item SIM2... OK Restoring Provisioning Item Files... OK Search LG Modem port... Detected LG Modem port at COM261 Read data from phone... Check adb server status... OK Checking adb... SW Version: X210APM10c Searching server... Waiting for server answer... Unlock done! Elapsed: 650 secs. --> (v9.58)