Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1015 - GSM-Forum

faruk_patwary · 12-29-2015, 18:55

Samsung galaxy A800F frp lock reset done..

Operation: Reset FRP/React/EE
Selected model: SM-A800F/DS
Software version: 23.9

Searching Samsung USB Flash Interface... detected COM7
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... not supported
Searching EE lock... OK
Erasing EE lock... OK
Reset done
Done with Samsung Tool PRO v.23.9

grmcrkrs · 12-29-2015, 19:05

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose USB (or 'DM/DUN over HSIC').
4. Reboot phone.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SGH-I527
Selected port: COM62 SAMSUNG Mobile USB Serial Port
Software version: 23.9

Reading phone info...
Reading IMEI... OK
IMEI: 35774205073****
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.23.9

tarakhail · 12-29-2015, 19:47

Operation: Unlock
Selected model: SM-G928F
Software version: 23.9

Waiting ADB device... OK
Reading phone info...
Model: SM-G928F
Android version: 5.1.1
Product code: SM-G928FZDAVOD
Phone version: G928FXXU1AOH3
PDA version: G928FXXU1AOH3
CSC version: G928FVFG1AOH3
CSC country code: UK
CSC sales code: VOD
HW version: MP 0.500
Phone S/N: RF8GA0xxxxx
Modem board: SHANNON333
RF cal date: 20151009
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Writing nv data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.23.9

Thanx z3x Team

maxpatri9 · 12-29-2015, 19:53

lg ms345 frp unlock done´
LG 2-3G Tool v8.6
modelos soportados: 1096

Check Android Lollipop...
Stage #1
Stage #2 OK
Stage #3 OK
Android Lollipop detected
Modo: Emergencia
modelo MS345
Transcurrido 8 segundos --> (v8.6)

Phone mode is DOWNLOAD
Start reset Google Account Lock...
Model name: LGMS345
Software verion: MS34510e
IMEI: 35160807403
Reset ...
Reinicar...
Transcurrido 2 segundos --> (v8.6)

Gambitv01 · 12-29-2015, 22:58

Selected model: I9192
Selected port: COM349 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Searching Samsung modem... not found
Done with Samsung Tool v.18.2

Selected model: I9192
Selected port: COM349 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Searching Samsung modem... detected COM350
Reading phone info...
Software version: =1,1
IMEI: XXXXXXXXXXXXXXXX
Product code:
Done with Samsung Tool v.18.2

Selected model: I9192
Selected port: COM349 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Searching ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: GT-I9192
Android version: 4.4.2
Product code: GT-I9192ZWAZTR
Phone version: I9192DDUCNL1
PDA version: I9192DDUCNL1
CSC version: I9192ODDCNH1
IMEI: XXXXXXXXXXXXXX
Phone S/N: R21F31Y1Q9R
Checking Super user right... true
Backuping MMCBLK... OK
Checking phone at COM349
Backuping NVM... OK
Writing data to phone... OK
Rebooting phone... OK
Waiting phone...
Please, allow USB debugging on phone...
Please, allow USB debugging on phone... OK
Bypass MSL... OK
Repairing... OK
Checking phone at COM349
Restoring NVM... OK
Reseting... OK
Repair done
Done with Samsung Tool v.18.2

Done with Samsung Tool v.18.2

grmcrkrs · 12-29-2015, 23:53

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose USB (or 'DM/DUN over HSIC').
4. Reboot phone.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SGH-I527
Selected port: COM67 SAMSUNG Mobile USB Serial Port
Software version: 23.9

Reading phone info...
Reading IMEI... OK
IMEI: 359160051****18
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.23.9

rasgula · 12-30-2015, 02:50

G530W unlocked

Code:

Reading phone info...
Reading IMEI... OK
IMEI: 359653060612697
Unlocking... OK
Reseting... OK
Unlock done

mehta jaideep · 12-30-2015, 07:01

JAIDEEP MEHTA.
INDIA.

sajid11 · 12-30-2015, 08:44

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available).
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SM-N910W8
Selected port: COM302 SAMSUNG Mobile USB Serial Port
Software version: 23.9

Reading phone info...
Reading IMEI... OK
IMEI: 3545950xxxxxxxx
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.23.9

-Mosin- · 12-30-2015, 09:07

samsung galaxy s 4g SGH-T959W IMEI Repair Done.

Operation: Repair
Selected model: SGH-T959V
Software version: 23.9

Waiting ADB device... OK
Reading phone info...
Model: SGH-T959W
Android version: 2.3.6
Product code: SGH-T959HAYGLW
Phone version: T959WUQLB6
PDA version: T959WUQLB6
CSC version: T959WYVLLB6
CSC country code: Canada
CSC sales code: GLW
HW version: REV1.1
Phone S/N: 00000000000
Modem board:
RF cal date: 2011.3.18
IMEI: 000000000000000
Checking Super user right... true
Reading nv data... OK
Writing nv data... OK
Rebooting phone... OK
Repair done

Done with Samsung Tool PRO v.23.9

Safyan sufi · 12-30-2015, 12:52

Samsung G318-H write cert done

LOG

Quote:

Operation: Write CERT
Selected model: SM-G318H
Software version: 23.9

Checking certificate file... OK
KEY ID: 0117
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G318H
Android version: 4.4.4
Product code: SM-G318H
Phone version: G318H
PDA version: G318H
CSC version: G318H
CSC country code: UAE
CSC sales code:
HW version: MP 0.300
Phone S/N: Rxxxxxxx
Modem board: SCxxxxx
RF cal date: 201xxxx
IMEI: 355xxxxxxxxxxxx
Checking Super user right... true
Writing CERT... OK
Rebooting phone... OK
Write CERT done

Done with Samsung Tool PRO v.23.9

One_Hermit · 12-30-2015, 14:44

razib143 · 12-30-2015, 15:05

Samsund E1200I Unlock code read done..

UNLOCK INSTRUCTIONS:
Flash mode:
COM Port does not matter, phone will be detect automatically.
1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
2. Connect phone in flash mode (Press 'OK' button (Centre of navigation buttons module) and connect USB cable).

Normal mode:
1. Connect powered on phone to USB, choose correct COM port in port settings.
1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.

Operation: Read Codes
Selected model: GT-E1200I
Selected port: COM52 SciCmpst Diag
Software version: 23.5

Reading phone info... OK
IMEI Master: 356893065441535
Product code: GT-E1200ZKITSC
Phone HW: MP 0.400
Phone S/N: R21FC0Q1P0
Reading codes... OK
Please wait, calculating codes... OK (time - 00:01:40)
Freeze code: 70463792
NET lock: 79302475
Sub lock: 00000000
SP lock: 48363050
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.23.5

GsmKing229 · 12-30-2015, 16:32

WONDERFULL Z3x !!!! SAMSUNG NOTE 4 ( sm-N910T ) succesfully unlock in just a click

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available).
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SM-N910T
Selected port: COM96 SAMSUNG Mobile USB Serial Port
Software version: 23.9

Reading phone info...
Reading IMEI... OK
IMEI: 3545940xxxxxxxx
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.23.9

GsmKing229 · 12-30-2015, 16:32

WONDERFULL Z3x !!!! SAMSUNG NOTE 4 ( sm-N910T ) succesfully unlock in just a click

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available).
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SM-N910T
Selected port: COM96 SAMSUNG Mobile USB Serial Port
Software version: 23.9

Reading phone info...
Reading IMEI... OK
IMEI: 3545940xxxxxxxx
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.23.9

12-30-2015, 02:50	#15217 (permalink)
rasgula No Life Poster Join Date: Feb 2005 Location: Canada Posts: 1,279 Member: 119464 Status: Offline Thanks Meter: 288	G530W unlocked Code: Reading phone info... Reading IMEI... OK IMEI: 359653060612697 Unlocking... OK Reseting... OK Unlock done

12-30-2015, 07:01	#15218 (permalink)
mehta jaideep Freak Poster Join Date: Oct 2009 Location: INDIA Age: 61 Posts: 276 Member: 1138694 Status: Offline Thanks Meter: 72	N7105 imei repair done JAIDEEP MEHTA. INDIA.

12-30-2015, 08:44	#15219 (permalink)
sajid11 Freak Poster Join Date: Feb 2008 Location: royal mobiles kotla Posts: 275 Member: 714116 Status: Offline Thanks Meter: 48	n910w8 without root UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available). 4. Reboot phone. Or use 'Activate Diag' function from 'Repair' tab. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SM-N910W8 Selected port: COM302 SAMSUNG Mobile USB Serial Port Software version: 23.9 Reading phone info... Reading IMEI... OK IMEI: 3545950xxxxxxxx Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.23.9

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29

12-29-2015, 18:55	#15211 (permalink)
faruk_patwary Freak Poster Join Date: Dec 2009 Location: Oman+BD Posts: 287 Member: 1194197 Status: Offline Sonork: 100.1671026 Thanks Meter: 185	Samsung galaxy A800F frp lock reset done.. Operation: Reset FRP/React/EE Selected model: SM-A800F/DS Software version: 23.9 Searching Samsung USB Flash Interface... detected COM7 Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP... OK Searching Reactivation lock... not supported Searching EE lock... OK Erasing EE lock... OK Reset done Done with Samsung Tool PRO v.23.9

12-29-2015, 19:05	#15212 (permalink)
grmcrkrs Freak Poster Join Date: Nov 2015 Location: Alabama, United States Age: 41 Posts: 143 Member: 2489757 Status: Offline Thanks Meter: 6	UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose USB (or 'DM/DUN over HSIC'). 4. Reboot phone. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SGH-I527 Selected port: COM62 SAMSUNG Mobile USB Serial Port Software version: 23.9 Reading phone info... Reading IMEI... OK IMEI: 35774205073**** Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.23.9

12-29-2015, 19:47	#15213 (permalink)
tarakhail Freak Poster Join Date: Aug 2014 Location: UK Posts: 408 Member: 2240742 Status: Offline Thanks Meter: 76	Operation: Unlock Selected model: SM-G928F Software version: 23.9 Waiting ADB device... OK Reading phone info... Model: SM-G928F Android version: 5.1.1 Product code: SM-G928FZDAVOD Phone version: G928FXXU1AOH3 PDA version: G928FXXU1AOH3 CSC version: G928FVFG1AOH3 CSC country code: UK CSC sales code: VOD HW version: MP 0.500 Phone S/N: RF8GA0xxxxx Modem board: SHANNON333 RF cal date: 20151009 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... OK Reading nv data... OK Checking NV data... OK Calculating... OK Writing nv data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.23.9 Thanx z3x Team

12-29-2015, 19:53	#15214 (permalink)
maxpatri9 No Life Poster Join Date: Apr 2015 Location: Dominican Republic Posts: 2,563 Member: 2382052 Status: Offline Thanks Meter: 1,511	lg ms345 frp unlock done´ LG 2-3G Tool v8.6 modelos soportados: 1096 Check Android Lollipop... Stage #1 Stage #2 OK Stage #3 OK Android Lollipop detected Modo: Emergencia modelo MS345 Transcurrido 8 segundos --> (v8.6) Phone mode is DOWNLOAD Start reset Google Account Lock... Model name: LGMS345 Software verion: MS34510e IMEI: 35160807403 Reset ... Reinicar... Transcurrido 2 segundos --> (v8.6)

12-29-2015, 22:58	#15215 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	Selected model: I9192 Selected port: COM349 SAMSUNG Mobile USB Serial Port Selected port speed: 115200 Searching Samsung modem... not found Done with Samsung Tool v.18.2 Selected model: I9192 Selected port: COM349 SAMSUNG Mobile USB Serial Port Selected port speed: 115200 Searching Samsung modem... detected COM350 Reading phone info... Software version: =1,1 IMEI: XXXXXXXXXXXXXXXX Product code: Done with Samsung Tool v.18.2 Selected model: I9192 Selected port: COM349 SAMSUNG Mobile USB Serial Port Selected port speed: 115200 Searching ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: GT-I9192 Android version: 4.4.2 Product code: GT-I9192ZWAZTR Phone version: I9192DDUCNL1 PDA version: I9192DDUCNL1 CSC version: I9192ODDCNH1 IMEI: XXXXXXXXXXXXXX Phone S/N: R21F31Y1Q9R Checking Super user right... true Backuping MMCBLK... OK Checking phone at COM349 Backuping NVM... OK Writing data to phone... OK Rebooting phone... OK Waiting phone... Please, allow USB debugging on phone... Please, allow USB debugging on phone... OK Bypass MSL... OK Repairing... OK Checking phone at COM349 Restoring NVM... OK Reseting... OK Repair done Done with Samsung Tool v.18.2 Done with Samsung Tool v.18.2

12-29-2015, 23:53	#15216 (permalink)
grmcrkrs Freak Poster Join Date: Nov 2015 Location: Alabama, United States Age: 41 Posts: 143 Member: 2489757 Status: Offline Thanks Meter: 6	UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose USB (or 'DM/DUN over HSIC'). 4. Reboot phone. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SGH-I527 Selected port: COM67 SAMSUNG Mobile USB Serial Port Software version: 23.9 Reading phone info... Reading IMEI... OK IMEI: 359160051****18 Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.23.9

12-30-2015, 09:07	#15220 (permalink)
-Mosin- No Life Poster Join Date: May 2013 Location: Far From Home..:( Posts: 2,003 Member: 1948608 Status: Offline Thanks Meter: 1,744	samsung galaxy s 4g SGH-T959W IMEI Repair Done. Operation: Repair Selected model: SGH-T959V Software version: 23.9 Waiting ADB device... OK Reading phone info... Model: SGH-T959W Android version: 2.3.6 Product code: SGH-T959HAYGLW Phone version: T959WUQLB6 PDA version: T959WUQLB6 CSC version: T959WYVLLB6 CSC country code: Canada CSC sales code: GLW HW version: REV1.1 Phone S/N: 00000000000 Modem board: RF cal date: 2011.3.18 IMEI: 000000000000000 Checking Super user right... true Reading nv data... OK Writing nv data... OK Rebooting phone... OK Repair done Done with Samsung Tool PRO v.23.9

12-30-2015, 14:44	#15222 (permalink)
One_Hermit Freak Poster Join Date: Oct 2014 Location: India Posts: 276 Member: 2282226 Status: Offline Thanks Meter: 52

12-30-2015, 15:05	#15223 (permalink)
razib143 No Life Poster Join Date: Sep 2006 Location: Dhaka Bangladesh Age: 33 Posts: 3,491 Member: 348877 Status: Offline Sonork: 1601289 Thanks Meter: 1,178	Samsund E1200I Unlock code read done.. UNLOCK INSTRUCTIONS: Flash mode: COM Port does not matter, phone will be detect automatically. 1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes. 2. Connect phone in flash mode (Press 'OK' button (Centre of navigation buttons module) and connect USB cable). Normal mode: 1. Connect powered on phone to USB, choose correct COM port in port settings. 1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes. Operation: Read Codes Selected model: GT-E1200I Selected port: COM52 SciCmpst Diag Software version: 23.5 Reading phone info... OK IMEI Master: 356893065441535 Product code: GT-E1200ZKITSC Phone HW: MP 0.400 Phone S/N: R21FC0Q1P0 Reading codes... OK Please wait, calculating codes... OK (time - 00:01:40) Freeze code: 70463792 NET lock: 79302475 Sub lock: 00000000 SP lock: 48363050 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.23.5

12-30-2015, 16:32	#15224 (permalink)
GsmKing229 Crazy Poster Join Date: Nov 2012 Location: GSM KINGDOM Posts: 59 Member: 1833305 Status: Offline Thanks Meter: 12	WONDERFULL Z3x !!!! SAMSUNG NOTE 4 ( sm-N910T ) succesfully unlock in just a click UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available). 4. Reboot phone. Or use 'Activate Diag' function from 'Repair' tab. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SM-N910T Selected port: COM96 SAMSUNG Mobile USB Serial Port Software version: 23.9 Reading phone info... Reading IMEI... OK IMEI: 3545940xxxxxxxx Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.23.9

12-30-2015, 16:32	#15225 (permalink)
GsmKing229 Crazy Poster Join Date: Nov 2012 Location: GSM KINGDOM Posts: 59 Member: 1833305 Status: Offline Thanks Meter: 12	WONDERFULL Z3x !!!! SAMSUNG NOTE 4 ( sm-N910T ) succesfully unlock in just a click UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose 'DM/DUN over HSIC' (ignore it, if it's not available). 4. Reboot phone. Or use 'Activate Diag' function from 'Repair' tab. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SM-N910T Selected port: COM96 SAMSUNG Mobile USB Serial Port Software version: 23.9 Reading phone info... Reading IMEI... OK IMEI: 3545940xxxxxxxx Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.23.9