problem with b3410 after flash - GSM-Forum

blaw · 03-23-2012, 14:38

hi
i received a working phone b3410 for change language.when i try with b3410 just i can reflash the cla file.(i think new pcb)
then i try with b3410n with usb cable but some error
phone blinck with 1800002

any help please

raoul plus · 03-23-2012, 14:56

try with full charged batterie if not successfully rehot flash ic and try a gain

blaw · 03-23-2012, 15:23

Quote:

Originally Posted by raoul plus

try with full charged batterie if not successfully rehot flash ic and try a gain

phone working before flash just i try to change the language.
i try with b3410 phone dead

Code:

Selected model: B3410 Selected com port: COM3 Selected speed port: 921600 Please, connect phone and press shortly power button Phone Detected Sending loader1... OK ARM version 3B11 Sending loader2... OK Flash ID: 00EC2206000100000034 Start TFS format... NAND format - Fail Format TFS - fail Elapsed time: 19 second, sw ver: 3.5.0035

and when i try to reflash with choise b3410n with usb cable phone blinking with 1800002 error

saifuuu7 · 03-23-2012, 15:56

flash using multiloader v5.65 xenon edition....
put ur mobile in download mode and conect then start....
best of luck ... tested 100%%%

blaw · 03-23-2012, 16:14

Quote:

Originally Posted by saifuuu7

flash using multiloader v5.65 xenon edition....
put ur mobile in download mode and conect then start....
best of luck ... tested 100%%%

we speak here for swift model and not qualcomm !!!

saifuuu7 · 03-23-2012, 16:36

How To Flash Samsung B3410

check this..... worked for me..

blaw · 03-24-2012, 10:13

Quote:

Originally Posted by saifuuu7

How To Flash Samsung B3410

check this..... worked for me..

error when i try to upload csc file.

now i try to erase eeprom with choise b3410 and flash with choise b3410n
here the log with z3x

B3410JPJC2.cla
B3410JPJC2.tfs
B3410OJPJC3.csc

Code:

Selected model: B3410N
Selected com port: COM3
Selected speed port: 921600
Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> ADC158162B
Info for PNX -> 113B000003031665
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Erasing... OK
Sending... OK
Sending TFS... OK
Sending CSC... OK
Connect to control pipe... OK
Download - ok
Elapsed time: 802 second, sw ver: 3.5.0033

some error phone blinck with 1800002 error
nb

hone work before flash just for change language

Vijendra Saini · 03-24-2012, 20:32

There are too many youngster here who were given bla bla solution and misguide user.
Just erased the phone firmware then flash the phone.

Br.
Vijendra Saini.

blaw · 03-25-2012, 21:19

Quote:

Originally Posted by vijendrasaini

There are too many youngster here who were given bla bla solution and misguide user.
Just erased the phone firmware then flash the phone.

Br.
Vijendra Saini.

this logs for erase nor with hwk

Code:

BBID: ADC158162B
MCU Id: 3B11, PNX6508/13/16/17
Preloader Ok, 460800 Baud
Flashloader Ok
FLASH Id: 00EC2206000100000034, Samsung KAP29WG00M [NAND 1G]
Erase Done, 240 sector(s), Time: 01:19

then i try to reflash with flash loader

but really some error
please any work solution for this phone

**hamada-almasry** · 03-25-2012, 22:06

if you speak Arabic see here

http://www.arabboxs.com/vb/showthread.php?p=358#post358

Vijendra Saini · 03-25-2012, 22:14

Quote:

Originally Posted by blaw

this logs for erase nor with hwk

Code:

BBID: ADC158162B
MCU Id: 3B11, PNX6508/13/16/17
Preloader Ok, 460800 Baud
Flashloader Ok
FLASH Id: 00EC2206000100000034, Samsung KAP29WG00M [NAND 1G]
Erase Done, 240 sector(s), Time: 01:19

then i try to reflash with flash loader

but really some error
please any work solution for this phone

Just go to hwk section,thats an Z3x section.
Why you were waste your and mine time here :@
I dont get any profit here to help peoples.
Just flash the phone with original downloader and if you want to flash with z3x just select 3410 not different varient.
3410 and 3410n both are different.

Vijendra Saini.

blaw · 03-25-2012, 23:06

Quote:

Originally Posted by hamada-almasry

if you speak Arabic see here

http://www.arabboxs.com/vb/showthread.php?p=358#post358

ok brother

this log for erease

Code:

Selected model: B3410
Selected com port: COM8
Selected speed port: 921600
Please, connect phone and press shortly power button
Phone Detected
Sending loader1... OK
ARM version 3B11
Sending loader2... OK
Flash ID: 00EC2206000100000034
Erase - ok
Elapsed time: 29 second, sw ver: 3.5.0035

then i reflash with z3 like b3410n becose with flash loader i get error

Code:

Selected model: B3410N
Selected com port: COM8
Selected speed port: 921600
Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> ADC158162B
Info for PNX -> 113B000003031665
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Erasing... OK
Sending... OK
Sending TFS... OK
Sending CSC... OK
Connect to control pipe... OK
Download - ok
Elapsed time: 884 second, sw ver: 3.5.0035

and my phone .............work thks

**hamada-almasry** · 03-25-2012, 23:54

if you Erasing to z3 dont flash to z3 only flash with downloder

HawK19 · 12-28-2012, 22:21

wat flash file u used on B3410N ?

03-23-2012, 14:38	#1 (permalink)
blaw No Life Poster Join Date: Dec 2006 Location: Tunisia Posts: 1,093 Member: 411207 Status: Offline Thanks Meter: 164	problem with b3410 after flash hi i received a working phone b3410 for change language.when i try with b3410 just i can reflash the cla file.(i think new pcb) then i try with b3410n with usb cable but some error phone blinck with 1800002 any help please

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

03-23-2012, 14:56	#2 (permalink)
raoul plus Freak Poster Join Date: Jan 2007 Location: algeria Posts: 380 Member: 436600 Status: Offline Thanks Meter: 67	try with full charged batterie if not successfully rehot flash ic and try a gain

03-23-2012, 15:56	#4 (permalink)
saifuuu7 Freak Poster Join Date: Feb 2011 Location: mumbai Age: 31 Posts: 331 Member: 1526620 Status: Offline Sonork: 100.1646327 Thanks Meter: 69	flash using multiloader v5.65 xenon edition.... put ur mobile in download mode and conect then start.... best of luck ... tested 100%%%

03-23-2012, 16:36	#6 (permalink)
saifuuu7 Freak Poster Join Date: Feb 2011 Location: mumbai Age: 31 Posts: 331 Member: 1526620 Status: Offline Sonork: 100.1646327 Thanks Meter: 69	How To Flash Samsung B3410 check this..... worked for me..

03-24-2012, 20:32	#8 (permalink)
Vijendra Saini No Life Poster Join Date: Nov 2006 Location: Back after long time :-) Age: 40 Posts: 4,397 Member: 398557 Status: Offline Sonork: 100.1578489 Thanks Meter: 1,516	There are too many youngster here who were given bla bla solution and misguide user. Just erased the phone firmware then flash the phone. Br. Vijendra Saini.

03-25-2012, 22:06	#10 (permalink)
hamada-almasry Product Manager Join Date: Oct 2007 Location: 乂事Lover事& Posts: 1,907 Member: 619738 Status: Offline Sonork: 100.1582811 Thanks Meter: 5,212	if you speak Arabic see here http://www.arabboxs.com/vb/showthread.php?p=358#post358

03-25-2012, 23:54	#13 (permalink)
hamada-almasry Product Manager Join Date: Oct 2007 Location: 乂事Lover事& Posts: 1,907 Member: 619738 Status: Offline Sonork: 100.1582811 Thanks Meter: 5,212	if you Erasing to z3 dont flash to z3 only flash with downloder

12-28-2012, 22:21	#14 (permalink)
HawK19 Junior Member Join Date: Mar 2007 Posts: 11 Member: 479945 Status: Offline Thanks Meter: 3	wat flash file u used on B3410N ?