s3350 user code...

[SicilianBoy]

hi all,i got a samsung s3350 with a password when trying to enter in the messages,i tried to unlock the phone but here is the log:

-------------------------------------------------------------------------------
Selected model: S3350
Selected com port: COM7
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Already patched SW
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Timeout
Deactivate MSL - fail
Unlock - fail
Elapsed time: 104 second, sw ver: 3.5.0035
-------------------------------------------------------------------------------


after power on the phone connect the uart cable,i dont get this passage,the cable i use is the usb one so what am i supposed to connect and where?

please let me know what could i do

thanks a lot in advance


P.S: also if i try to just reset the user code here is the log:

Selected model: S3350
Selected com port: COM7
Selected speed port: 921600
Phone must be ON
Use UART cable E210 or J750
Timeout
Read user code - fail
Elapsed time: 33 second, sw ver: 3.5.0035
-------------------------------------------------------------------------------

problem is that e210 or j750 cable doesnt fit the s3350 so i really dont understand what am i supposed to do!

please give me some feedback

thanks again

[dany.d]

after power on conect cable rj45 !! not usb !!

[SicilianBoy]

and if i dont have the cable?

[dany.d]

micro uart cable...
z3x
lg
gx10x
gs102
sms
sgh c3300k
.....s7070

[SicilianBoy]

i am using s7070 uart cable for nspro,i heard they are the same

am i right?

thanks