s5570i hanng on samsung logo - GSM-Forum

ajmal786 · 06-06-2013, 19:12

s5570i hanng on samsung logo

i flash it but same.

how to solved problem?

.::intel32::. · 06-06-2013, 20:28

1 do hand reset
2 write full dump file with riffbox

SHIJILFONOTLY · 06-07-2013, 06:55

Hard reset the phone

canliyayin · 06-07-2013, 08:13

odin v4.38-configuration file-OPS TASS_v1.0.ops -ARM11boot_GT-S5570.tar and s5570i firmware

ajmal786 · 06-07-2013, 10:59

Quote:

Originally Posted by SHIJILFONOTLY

Hard reset the phone

it can't enter recovery/hard reset mode.

ajmal786 · 06-07-2013, 11:11

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> PDA_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> MODEM_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> GT-S5570I-MULTI-CSC-OXELB1_RST.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/157> Added!!
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> PDA_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> MODEM_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> GT-S5570I-MULTI-CSC-OXELB1_RST.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/157> Odin v.3 engine (ID:157)..
<ID:0/157> File analysis..
<ID:0/157> SetupConnection..
<ID:0/157> Initialzation..
<ID:0/157> Set PIT file..
<ID:0/157> DO NOT TURN OFF TARGET!!
<ID:0/157> Get PIT for mapping..
<ID:0/157> Firmware update start..
<ID:0/157> BcmBoot.img
<ID:0/157> NAND Write Start!!
<ID:0/157> HEDGE_NVRAM8_RF_LE.bin
<ID:0/157> sysparm_dep.img
<ID:0/157> Sbl.bin
<ID:0/157> boot.img
<ID:0/157> system.img
<ID:0/157> userdata.img
<ID:0/157> param.lfs
<ID:0/157> BcmCP.img
<ID:0/157> Transmission Complete..
<ID:0/157> Now Writing.. Please wait about 2 minutes
<ID:0/157> Receive Response from boot-loader
<ID:0/157> csc.rfs
<ID:0/157> RQT_CLOSE !!
<ID:0/157> RES OK !!
<ID:0/157> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/157> Removed!!

ajmal786 · 06-20-2013, 15:47

how to fix this problem??

Almost i try with all firmware from support Area but not luck.

AnyOne have tested file please.

need help z3x team please.

.::MASTER ALONE::. · 06-20-2013, 16:44

Quote:

Originally Posted by ajmal786

how to fix this problem??

Almost i try with all firmware from support Area but not luck.

AnyOne have tested file please.

need help z3x team please.

Boot Repair 1st With Jtag.

BR.
Arsalan gsm2000.

06-06-2013, 19:12	#1 (permalink)
ajmal786 No Life Poster Join Date: Aug 2012 Posts: 979 Member: 1792561 Status: Offline Thanks Meter: 78	s5570i hanng on samsung logo s5570i hanng on samsung logo i flash it but same. how to solved problem?

06-06-2013, 20:28	#2 (permalink)
.::intel32::. No Life Poster Join Date: Sep 2006 Location: India Posts: 913 Member: 350719 Status: Offline Sonork: 100.1623850 Thanks Meter: 157	1 do hand reset 2 write full dump file with riffbox Last edited by .::intel32::.; 06-06-2013 at 20:33. Reason: forgot

06-07-2013, 06:55	#3 (permalink)
SHIJILFONOTLY Product Supporter Join Date: Sep 2006 Location: Kerala-India Age: 46 Posts: 6,600 Member: 351924 Status: Offline Thanks Meter: 12,469	Hard reset the phone

06-07-2013, 11:11	#6 (permalink)
ajmal786 No Life Poster Join Date: Aug 2012 Posts: 979 Member: 1792561 Status: Offline Thanks Meter: 78	<OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> DefaultCalDataWithBoot_S5570IXXLD6_REV03.tar.md5 is valid. <OSM> PDA_S5570IXXLD6_REV03.tar.md5 is valid. <OSM> MODEM_S5570IXXLD6_REV03.tar.md5 is valid. <OSM> GT-S5570I-MULTI-CSC-OXELB1_RST.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/157> Added!! <OSM> All threads completed. (succeed 0 / failed 0) <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> DefaultCalDataWithBoot_S5570IXXLD6_REV03.tar.md5 is valid. <OSM> PDA_S5570IXXLD6_REV03.tar.md5 is valid. <OSM> MODEM_S5570IXXLD6_REV03.tar.md5 is valid. <OSM> GT-S5570I-MULTI-CSC-OXELB1_RST.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/157> Odin v.3 engine (ID:157).. <ID:0/157> File analysis.. <ID:0/157> SetupConnection.. <ID:0/157> Initialzation.. <ID:0/157> Set PIT file.. <ID:0/157> DO NOT TURN OFF TARGET!! <ID:0/157> Get PIT for mapping.. <ID:0/157> Firmware update start.. <ID:0/157> BcmBoot.img <ID:0/157> NAND Write Start!! <ID:0/157> HEDGE_NVRAM8_RF_LE.bin <ID:0/157> sysparm_dep.img <ID:0/157> Sbl.bin <ID:0/157> boot.img <ID:0/157> system.img <ID:0/157> userdata.img <ID:0/157> param.lfs <ID:0/157> BcmCP.img <ID:0/157> Transmission Complete.. <ID:0/157> Now Writing.. Please wait about 2 minutes <ID:0/157> Receive Response from boot-loader <ID:0/157> csc.rfs <ID:0/157> RQT_CLOSE !! <ID:0/157> RES OK !! <ID:0/157> Completed.. <OSM> All threads completed. (succeed 1 / failed 0) <ID:0/157> Removed!!

06-20-2013, 15:47	#7 (permalink)
ajmal786 No Life Poster Join Date: Aug 2012 Posts: 979 Member: 1792561 Status: Offline Thanks Meter: 78	how to fix this problem?? Almost i try with all firmware from support Area but not luck. AnyOne have tested file please. need help z3x team please.