|
s5610 successfull unlock..by z3x 3 Attachment(s) down load & install only z3x driver(SAMSUNG_USB_Driver_for_Mobile_Phones) in pc from server z3x 1 down load this file from z3x server ( CSC_S5620ODDJC1) 10 mb ( CODE_S5620DDJC1) 10 mb 2 connect phone in download mode. (for download mode prees volum down key then press power on) 3 connect cable to pc with phone . 4 clock on port serch on multi loder. 5 phone port will select by exe . 6 click on full download of m d exe. 7 select boot filr folder .after select all file as on image 8 click on download 9 within 5 to 8 minut flace will complit . 10 after flace run z3x softwere select model 5620 11 select all file as on image 3 . 12 click on direct unlock yr phone will unlock enjoy & earn mony |
sorry this phone is s5620 |
S5610 unlocked done.... Code: Selected model: S5610 |
Thank You good useful post. keep post log.... |
Good Work Mate. BR. Arsalan gsm2000. |
Which cable do you use? |
Code: Selected model: S5610 |
Use cable B3210 (micro uart+usb) select z3x port Selected model: S5610 Selected com port: COM4 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Phone in TAT MODE Phone IMEI: 35526405xxxxyy Phone SW: S5610BVKL1 Phone BT ADDR: 50F5-20-3C880B Phone SN: R21D26EQHV [FREZEE]:188xxxx [NET LOCK]:1002xxxx [Subset LOCK]:00000000 [SP LOCK]:00000000 [CP LOCK]:00000000 [Sim LOCK]:00000000 [Activa LOCK]:00000000 [Phone LOCK]:00000000 Read info - ok Elapsed time: 22 second, sw ver: 3.5.0040 ------------------------------------------------------------------------------- |
Yea i make a video about unlocking with uart http://www.youtube.com/watch?v=V62LH0CDpyQ Sent from my GT-I8190N using Tapatalk |
with c3300k microuart cable Selected model: S5610 Selected com port: COM4 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Phone in TAT MODE Phone IMEI: 3594xxxxxxxxxx Phone SW: S5xxxxVML1 Phone BT ADDR: BC44-86-C2173B Phone SN: R21xxxxx5V [FREZEE]:1xxxx350 [NET LOCK]:79xxx400 [Subset LOCK]:00000000 [SP LOCK]:00000000 [CP LOCK]:00000000 [Sim LOCK]:00000000 [Activa LOCK]:00000000 [Phone LOCK]:00000000 Read info - ok Elapsed time: 14 second, sw ver: 3.5.0040 |
c33ook cable Selected model: S5610 Selected com port: COM4 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Phone in TAT MODE Phone IMEI: 353630xxxxx Phone SW: S5610BVKL1 Phone BT ADDR: 04FE-31-286DA1 Phone SN: R21C87xxxx [FREZEE]:30135200 [NET LOCK]:68082110 [Subset LOCK]:00000000 [SP LOCK]:00000000 [CP LOCK]:00000000 [Sim LOCK]:00000000 [Activa LOCK]:00000000 [Phone LOCK]:00000000 Read info - ok Elapsed time: 28 second, sw ver: 3.5.0040 ------------------------------------------------------ |
what's the flash mode for s5610 |
unlock done !!! Samsung S5610 with Z3X Use rj45 C3300k cable with the phone OFF , press read codes and insert C3300k cable . elected model: S5610 Selected com port: COM7 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Phone in TAT MODE Phone IMEI: 356939xxxxxxxxxx Phone SW: S5610Bxxxxxx Phone BT ADxxx: 10D5-42-7C3xxx1 Phone SN: Rxx57xxxxxx [FREZEE]:14260620 [NET LOCK]:08708250 [Subset LOCK]:00000000 [SP LOCK]:00000000 [CP LOCK]:00000000 [Sim LOCK]:00000000 [Activa LOCK]:00000000 [Phone LOCK]:00000000 Read info - ok Elapsed time: 10 second, sw ver: 3.5.0040 ------------------------------------------------------------------------------- |
with c3300k microuart cable again: Selected model: S5610 Selected com port: COM6 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Phone in TAT MODE Phone IMEI: 3552xxxxxxx Phone SW: S5610XXMA1 Phone BT ADDR: 50F5-20-37xxxx Phone SN: R21xxxxxx [FREZEE]:16069090 [NET LOCK]:480xxxx [Subset LOCK]:00000000 [SP LOCK]:00000000 [CP LOCK]:00000000 [Sim LOCK]:00000000 [Activa LOCK]:00000000 [Phone LOCK]:12345 Read info - ok Elapsed time: 10 second, sw ver: 3.5.0040 |
Z3X says phone is unlocked, but not unlocked, insert correct sim card showing..! why?? Selected model: S5610 Selected com port: COM5 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Phone in TAT MODE Phone IMEI: 35817304860239 Phone SW: S5610XXKK1 Phone BT ADDR: 18E2-C2-999F4A Phone SN: R21C52KAWQ All code change to -> 00000000 If phone lock enter code -> 00000000 Unlock - ok Elapsed time: 14 second, sw ver: 3.5.0040 |
Samsung S5610 Unlock With Z3X Box suceful to RJ 45 Cable S7070Selected model: S5610 Selected com port: COM4 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Phone in TAT MODE Phone IMEI: 35948605867473 Phone SW: S5610XXME1 Phone BT ADDR: C450-06-FB0452 Phone SN: R21F38Y6WA [FREZEE]:15180910 [NET LOCK]:80193780 [Subset LOCK]:00000000 [SP LOCK]:00000000 [CP LOCK]:00000000 [Sim LOCK]:00000000 [Activa LOCK]:00000000 [Phone LOCK]:00000000 Read info - ok Elapsed time: 18 second, sw ver: 3.5.0040 |
Can someone explain in detail the cable and flashing procedure? When I put any of the micro-usb cables to the S5610, the phone boots up, without pressing the power button. Please tell me which exact cable do you use for the S5610 and why the phone boots up without pressing the power button, and how to handle this unconditional bootup? |
the tool tries to read the Port so fast that I can not get the cable in the phone |
I dont know what to do |
Quote:
Br, xerraco |
g531h frp Operation: Reset FRP/React/EE Selected model: SM-G531H Software version: 35.2 Searching Samsung USB Flash interface... COM4 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP... OK Searching Reactivation lock... not supported Searching EE lock... OK Erasing EE lock... OK Reset done Done with Samsung Tool PRO v.35.2 |
UNLOCK INSTRUCTIONS: Micro-UART cable only: 1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes. 2. Connect the phone and press power button. Operation: Unlock Selected model: GT-S5610 Selected port: COM6 USB Serial Port Software version: 38.2 Connect phone and press power button... Phone detected Switching phone to TAT mode... OK Reading phone info... OK Phone version: S5610KJPKJ2 IMEI: 35363005899087 Phone SN: R21CA6JMW4 Phone BT: 14:89:FD:26:C6:7F Reading security... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.38.2 |
| All times are GMT +1. The time now is 08:23. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -