Samsung E1200T Blinking Problem DONE by Z3X Samsung Tool..... - GSM-Forum

-=C.J.S=- · 07-06-2013, 03:22

Samsung E1200T Blinking Problem DONE by Z3X Samsung Tool.....

Tools:

1.Z3x Samsung Tool

2.Cable RJ45 J750

Procedures:

1.Download Flashfile For E1200T ....e1200tdxll1_olall1 - Download - 4shared

2.Run Samsung Exe Tool by Z3x

3.Set FlashFile

4.First Attempt Reflash With 3 Version Firmware Problem Not Solved???

5.Second Attempt Click Erase EEP and Do Click Firware , Wait Until DONE Flashing...SUCCESS But IMEI Problem!

6.Rebuild IMEI and Click CUSTOM DONE! Successfull..............

khursheed512 · 03-30-2014, 13:41

flas done e1200t by hwk

janu_shivam · 04-19-2014, 15:09

this is work 1000% First Attempt Reflash With 4 Version Firmware Problem Not Solved???

i am try this method i am success

arshada+a · 06-24-2014, 12:24

this is work 1000% First Attempt Reflash With 4 Version Firmware Problem Not Solved???

i am try this method i am success
thanks c.j.s you r good.

bishalmobile12 · 07-10-2014, 12:24

Selected model: E1200T
Selected com port: COM10
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 0000
Set speed - Fail
Send loaders - fail
Elapsed time: 25 second, sw ver: 3.5.0040

n2roy · 09-24-2014, 11:56

good sollution but no one hit thans button,even me !

, we are so salfish!

anandbet · 11-06-2014, 07:55

e1200t flash after lcd daimage

D saakib elec · 12-23-2014, 16:17

after flash lcd graphics damaged

blacky199 · 01-04-2015, 16:16

Selected model: E1200T
Selected com port: COM7
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 16F0
Set speed - Fail
Send loaders - fail
Elapsed time: 24 second, sw ver: 3.5.0040

any solution pls if i retry to erase eep software hang

javeed inam · 01-11-2015, 12:27

s cjs bos its sucess by ur trick thanx bro keep it up

bhuneshjaipur · 01-26-2015, 09:13

thanx bro good solution

jagdish p · 02-18-2015, 06:46

samsung e1200t flash after lcd daimage solution emidetly pls sir

cellcare.in · 03-03-2015, 15:53

1000000000% done..thanks this solution

Hatimhunk5 · 03-12-2015, 11:35

How to flash E1200I Where is Is E1200I Model in this setup???

bhadra096 · 04-04-2015, 05:30

Selected com port: COM5
Selected speed port: 460800
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 00F4
Set speed - Fail
Send loaders - fail
Elapsed time: 7 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------
help me

07-06-2013, 03:22	#1 (permalink)
-=C.J.S=- Freak Poster Join Date: Jan 2008 Location: philippines Posts: 346 Member: 669596 Status: Offline Sonork: 1657504 Thanks Meter: 136	Samsung E1200T Blinking Problem DONE by Z3X Samsung Tool..... Samsung E1200T Blinking Problem DONE by Z3X Samsung Tool..... Tools: 1.Z3x Samsung Tool 2.Cable RJ45 J750 Procedures: 1.Download Flashfile For E1200T ....e1200tdxll1_olall1 - Download - 4shared 2.Run Samsung Exe Tool by Z3x 3.Set FlashFile 4.First Attempt Reflash With 3 Version Firmware Problem Not Solved??? 5.Second Attempt Click Erase EEP and Do Click Firware , Wait Until DONE Flashing...SUCCESS But IMEI Problem! 6.Rebuild IMEI and Click CUSTOM DONE! Successfull..............

09-24-2014, 11:56	#6 (permalink)
n2roy Freak Poster Join Date: Dec 2009 Location: Raiganj Age: 37 Posts: 433 Member: 1175794 Status: Offline Thanks Meter: 186	good sollution but no one hit thans button,even me !, we are so salfish!

11-06-2014, 07:55	#7 (permalink)
anandbet Junior Member Join Date: Jul 2014 Location: up jaunpur Posts: 24 Member: 2231417 Status: Offline Sonork: 100.1644808 Thanks Meter: 0	e1200t flash after lcd daimage e1200t flash after lcd daimage

03-30-2014, 13:41	#2 (permalink)
khursheed512 Insane Poster Join Date: Apr 2012 Location: bihar Posts: 71 Member: 1744469 Status: Offline Sonork: khursheed512 Thanks Meter: 15	flas done e1200t by hwk

04-19-2014, 15:09	#3 (permalink)
janu_shivam Banned Join Date: Feb 2010 Location: sonebhadra Ramgarh Posts: 238 Member: 1232828 Status: Offline Sonork: 100.1647663 Thanks Meter: 49	this is work 1000% First Attempt Reflash With 4 Version Firmware Problem Not Solved??? i am try this method i am success

06-24-2014, 12:24	#4 (permalink)
arshada+a Junior Member Join Date: Jan 2012 Location: simdega jharkhand india Age: 32 Posts: 30 Member: 1710756 Status: Offline Thanks Meter: 1	this is work 1000% First Attempt Reflash With 4 Version Firmware Problem Not Solved??? i am try this method i am success thanks c.j.s you r good.

07-10-2014, 12:24	#5 (permalink)
bishalmobile12 Freak Poster Join Date: Jun 2013 Location: NARKATIA BAZAR EST CHAMPRAN Posts: 168 Member: 1963073 Status: Offline Sonork: whatsApp only 9504990949 Thanks Meter: 31	Selected model: E1200T Selected com port: COM10 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Sending loader1... OK Flash ID: 0000 Set speed - Fail Send loaders - fail Elapsed time: 25 second, sw ver: 3.5.0040

12-23-2014, 16:17	#8 (permalink)
D saakib elec Freak Poster Join Date: Jun 2013 Location: Jammu and Kashmir Baramulla Posts: 463 Member: 1963898 Status: Offline Thanks Meter: 52	after flash lcd graphics damaged

01-04-2015, 16:16	#9 (permalink)
blacky199 No Life Poster Join Date: Sep 2013 Location: India Posts: 2,005 Member: 2030192 Status: Offline Thanks Meter: 1,334	Selected model: E1200T Selected com port: COM7 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Sending loader1... OK Flash ID: 16F0 Set speed - Fail Send loaders - fail Elapsed time: 24 second, sw ver: 3.5.0040 any solution pls if i retry to erase eep software hang

01-11-2015, 12:27	#10 (permalink)
javeed inam Crazy Poster Join Date: Nov 2011 Posts: 56 Member: 1681695 Status: Offline Thanks Meter: 7	s cjs bos its sucess by ur trick thanx bro keep it up

01-26-2015, 09:13	#11 (permalink)
bhuneshjaipur Junior Member Join Date: Sep 2014 Posts: 32 Member: 2263582 Status: Offline Thanks Meter: 4	thanx bro good solution

02-18-2015, 06:46	#12 (permalink)
jagdish p Junior Member Join Date: Feb 2012 Location: india Posts: 2 Member: 1724978 Status: Offline Sonork: 17918 Thanks Meter: 0	samsung e1200t flash after lcd daimage solution emidetly pls sir

03-03-2015, 15:53	#13 (permalink)
cellcare.in Junior Member Join Date: May 2013 Posts: 17 Member: 1936972 Status: Offline Thanks Meter: 5	1000000000% done..thanks this solution

03-12-2015, 11:35	#14 (permalink)
Hatimhunk5 Freak Poster Join Date: Jan 2014 Location: Shahjahanpur U.P 27 Posts: 166 Member: 2117717 Status: Offline Sonork: 100.1663585 Thanks Meter: 28	How to flash E1200I Where is Is E1200I Model in this setup???

04-04-2015, 05:30	#15 (permalink)
bhadra096 Junior Member Join Date: Aug 2014 Posts: 10 Member: 2237463 Status: Offline Thanks Meter: 0	Selected com port: COM5 Selected speed port: 460800 Please, connect phone and press power button 3 seconds Phone Detected Sending loader1... OK Flash ID: 00F4 Set speed - Fail Send loaders - fail Elapsed time: 7 second, sw ver: 3.5.0040 ------------------------------------------------------------------------------- help me