samsung e2252 unlocking problem - Page 6 - GSM-Forum

ravinder mohan · 12-17-2013, 12:53

use z3x box .com port 3 use urt cable click tat made only read info and connect phone and no power on fhone auto tat mod and read code

rajavicky · 12-19-2013, 15:39

for unlocking with z3x first insert the uart cable and then insert the battery.. it was tested..

zohara · 01-10-2014, 13:50

thanx mohideen bhai.

its work bro

irshadraja · 03-24-2014, 10:53

ashish800 · 04-10-2014, 06:11

e2252 sim lock ok by z3x

Selected model: E2252
Selected com port: COM9
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone master OLD IMEI: 359**********
Phone slave OLD IMEI: 3598**********
Phone SW: E2252DDLG2
Phone CSC: E2252ODDLG2
Phone BT ADDR: 7445-8A-FE6AB8
Phone SN: RV1C92RL3H
Unlock - ok
Elapsed time: 38 second, sw ver: 3.5.0040

imraan ali · 04-24-2014, 12:27

samsung e2252 read codes info done with z3x
Selected model: E2252
Selected com port: COM5
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone master IMEI: 35984404759323
Phone slave IMEI: 35984504759323
Phone SW: E2252JPLG1
Phone CSC: E2252OJPLF1
Phone BT ADDR: 1489-FD-7EA82C
Phone SN: RV1CB0T422
[FREZEE]:69324020
[NET LOCK]:00000000
[Subset LOCK]:00000000
[SP LOCK]:00000000
[CP LOCK]:00000000
[Sim LOCK]:00000000
[Activa LOCK]:00000000
[Phone LOCK]:3245086
Read info - ok
Elapsed time: 14 second, sw ver: 3.5.0040
---------------------------------------------------

zahidshariff · 05-22-2014, 09:57

no need any bax to unlock just go to emergncy call then enter *2762*2878# its ep2 rest and unlocked

Kumbharanis · 06-02-2014, 12:17

Success work put sim card in mobile and press emergency options and then prees *2767*2878# and mobile automatic restart .Enjoy

kazim shabbir · 07-06-2014, 12:50

good solution brother.....thanks a lot.

khaledahadi · 07-07-2014, 09:00

thanks bro its working

Elapsed time: 33 second, sw ver: 3.5.0038
-------------------------------------------------------------------------------
Selected model: E2252
Selected com port: COM5
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Timeout
Phone fail TAT MODE
Unlock - FAIL
Elapsed time: 33 second, sw ver: 3.5.0038
-------------------------------------------------------------------------------
Selected model: E2252
Selected com port: COM5
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone master OLD IMEI: 35584505758323
Phone slave OLD IMEI: 35584605758323
Phone SW: E2252JPMA1
Phone CSC: E2252OJPLL2
Phone BT ADDR: B85E-7B-8B9C9C
Phone SN: RV1D92ZGSY
Unlock - ok
Elapsed time: 24 second, sw ver: 3.5.0038

cellsafemobile · 07-28-2014, 08:44

Quote:

Originally Posted by rajakhank3

finlally sucseesfully change imei by me its a simple trick and here is screenshot method is simple 1st conect cable and press power buton shortly set is on then remove betrry and put again and press power buton just a second phone screen show tat mode and imei sucseesfully change............

sucsess log2.JPG - 4shared.com - photo sharing - download image

E2252 imei repai done with this simple trick

chiragjoshi1 · 09-15-2014, 07:23

When i m starting this soft its says error - card not found

smkab143 · 10-06-2014, 09:08

connect phone and press 1 + 3 ur problem solve

dj4udx · 10-14-2014, 09:48

Selected model: E2252
Selected com port: COM7
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone master OLD IMEI: 35584505112253
Phone slave OLD IMEI: 35584605112253
Phone SW: E2252DDMA1
Phone CSC: E2252ODDMA1
Phone BT ADDR: 28CC-01-9EDFD4
Phone SN: RV1D2111AT
Unlock - ok
Elapsed time: 18 second, sw ver: 3.5.0040

ninojlampa · 10-14-2014, 10:01

Selected model: E2252
Selected com port: COM3
Selected speed port: 921600
Press "1" + "3" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A35
Sending loader... OK
Connect to control pipe... FAIL
Send loaders - fail
Elapsed time: 66 second, sw ver: 3.5.0038

03-24-2014, 10:53	#79 (permalink)
irshadraja Freak Poster Join Date: May 2011 Posts: 140 Member: 1577948 Status: Offline Sonork: rank Thanks Meter: 24	samsung e2252 unlock done with z3x

10-06-2014, 09:08	#88 (permalink)
smkab143 Freak Poster Join Date: Oct 2012 Location: India,Tripura Posts: 322 Member: 1830045 Status: Offline Thanks Meter: 39	e2252 flashing connect phone and press 1 + 3 ur problem solve

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	03-23-2015 14:21

12-17-2013, 12:53	#76 (permalink)
ravinder mohan Junior Member Join Date: Jun 2011 Posts: 1 Member: 1605558 Status: Offline Sonork: rinku Thanks Meter: 0	use z3x box .com port 3 use urt cable click tat made only read info and connect phone and no power on fhone auto tat mod and read code

12-19-2013, 15:39	#77 (permalink)
rajavicky Junior Member Join Date: Feb 2011 Posts: 9 Member: 1518701 Status: Offline Thanks Meter: 1	for unlocking with z3x first insert the uart cable and then insert the battery.. it was tested..

01-10-2014, 13:50	#78 (permalink)
zohara Junior Member Join Date: Oct 2012 Posts: 5 Member: 1824042 Status: Offline Thanks Meter: 0	thanx mohideen bhai. its work bro

04-10-2014, 06:11	#80 (permalink)
ashish800 No Life Poster Join Date: Feb 2013 Location: U.P-75 ETAWAH Age: 34 Posts: 2,068 Member: 1889562 Status: Offline Thanks Meter: 617	e2252 sim lock ok by z3x Selected model: E2252 Selected com port: COM9 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Use automatic parameters Phone in TAT MODE Phone master OLD IMEI: 359******** Phone slave OLD IMEI: 3598******** Phone SW: E2252DDLG2 Phone CSC: E2252ODDLG2 Phone BT ADDR: 7445-8A-FE6AB8 Phone SN: RV1C92RL3H Unlock - ok Elapsed time: 38 second, sw ver: 3.5.0040

04-24-2014, 12:27	#81 (permalink)
imraan ali Freak Poster Join Date: Sep 2013 Location: PaKiStAn & KSA Posts: 483 Member: 2023768 Status: Offline Sonork: 100.1661054 Thanks Meter: 76	samsung e2252 read codes info done with z3x Selected model: E2252 Selected com port: COM5 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Use automatic parameters Phone in TAT MODE Phone master IMEI: 35984404759323 Phone slave IMEI: 35984504759323 Phone SW: E2252JPLG1 Phone CSC: E2252OJPLF1 Phone BT ADDR: 1489-FD-7EA82C Phone SN: RV1CB0T422 [FREZEE]:69324020 [NET LOCK]:00000000 [Subset LOCK]:00000000 [SP LOCK]:00000000 [CP LOCK]:00000000 [Sim LOCK]:00000000 [Activa LOCK]:00000000 [Phone LOCK]:3245086 Read info - ok Elapsed time: 14 second, sw ver: 3.5.0040 ---------------------------------------------------

05-22-2014, 09:57	#82 (permalink)
zahidshariff Freak Poster Join Date: Feb 2006 Location: india Posts: 100 Member: 233950 Status: Offline Sonork: 1650875 Thanks Meter: 6	no need any bax to unlock just go to emergncy call then enter 27622878# its ep2 rest and unlocked

06-02-2014, 12:17	#83 (permalink)
Kumbharanis Junior Member Join Date: Nov 2011 Posts: 28 Member: 1688050 Status: Offline Thanks Meter: 2	Success work put sim card in mobile and press emergency options and then prees 27672878# and mobile automatic restart .Enjoy

07-06-2014, 12:50	#84 (permalink)
kazim shabbir Junior Member Join Date: Jan 2008 Posts: 26 Member: 674739 Status: Offline Thanks Meter: 4	good solution brother.....thanks a lot.

07-07-2014, 09:00	#85 (permalink)
khaledahadi Junior Member Join Date: May 2013 Posts: 34 Member: 1929152 Status: Offline Sonork: 07208412008 Thanks Meter: 5	thanks bro its working Elapsed time: 33 second, sw ver: 3.5.0038 ------------------------------------------------------------------------------- Selected model: E2252 Selected com port: COM5 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Timeout Phone fail TAT MODE Unlock - FAIL Elapsed time: 33 second, sw ver: 3.5.0038 ------------------------------------------------------------------------------- Selected model: E2252 Selected com port: COM5 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Use automatic parameters Phone in TAT MODE Phone master OLD IMEI: 35584505758323 Phone slave OLD IMEI: 35584605758323 Phone SW: E2252JPMA1 Phone CSC: E2252OJPLL2 Phone BT ADDR: B85E-7B-8B9C9C Phone SN: RV1D92ZGSY Unlock - ok Elapsed time: 24 second, sw ver: 3.5.0038

09-15-2014, 07:23	#87 (permalink)
chiragjoshi1 Junior Member Join Date: Jun 2007 Location: porbandar Age: 39 Posts: 3 Member: 537263 Status: Offline Thanks Meter: 0	When i m starting this soft its says error - card not found

10-14-2014, 09:48	#89 (permalink)
dj4udx Junior Member Join Date: Mar 2014 Posts: 1 Member: 2142544 Status: Offline Thanks Meter: 0	Selected model: E2252 Selected com port: COM7 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Use automatic parameters Phone in TAT MODE Phone master OLD IMEI: 35584505112253 Phone slave OLD IMEI: 35584605112253 Phone SW: E2252DDMA1 Phone CSC: E2252ODDMA1 Phone BT ADDR: 28CC-01-9EDFD4 Phone SN: RV1D2111AT Unlock - ok Elapsed time: 18 second, sw ver: 3.5.0040

10-14-2014, 10:01	#90 (permalink)
ninojlampa Crazy Poster Join Date: Jan 2010 Location: San Juan City Posts: 59 Member: 1216494 Status: Offline Thanks Meter: 8	Selected model: E2252 Selected com port: COM3 Selected speed port: 921600 Press "1" + "3" and connect USB cable to phone Connect to control pipe... OK Processor ID -> 0A35 Sending loader... OK Connect to control pipe... FAIL Send loaders - fail Elapsed time: 66 second, sw ver: 3.5.0038