samsung m2513 flash problem . - GSM-Forum

**aZimBahar** · 01-03-2012, 08:09

i have a samsung m2513 it hang on opening how to solve

what is boot mode ?

i need help . . .

waiting for reply . . .

**aZimBahar** · 01-10-2012, 07:07

problem solved with usb flash .

Quote:

Selected model: M2513
Selected com port: COM32
Selected speed port: USB
Decode *.s3 file - please wait
segments 9
segment 1 20000000 100 byte
segment 2 20300000 30809232 byte
segment 3 2001E000 180 byte
segment 4 20016000 26012 byte
segment 5 20078000 1139808 byte
segment 6 2000C000 21416 byte
segment 7 20058000 56 byte
segment 8 20058138 16920 byte
segment 9 2003803C 37452 byte
Start USB Flash
Syncing phone... OK
Sending USB loader... OK
Syncing phone... OK
Flash ID: 890000007E88
Syncing phone... OK
Sending *.s3 file... OK
Sending *.cts or *.csc file...
Detected file - > 117
Format FFS - wait... OK
Send content - wait... OK
Elapsed time: 388 second, sw ver: 3.5.0030

maktel mobile · 01-10-2012, 14:17

How to boot key. please help.

**aZimBahar** · 02-29-2012, 06:21

Quote:

Originally Posted by maktel mobile

How to boot key. please help.

brother try this .

Quote:

- To set the phone to flash mode follow the steps below:

1. Phone off with battery (without the USB cable connected to the phone)
2. Hold the (-) the volume down key + number 9 (nine) for a few seconds and then plug the USB cable to the phone.
3. Release the keys of the volume and number 9

**aZimBahar** · 02-29-2012, 06:32

1. FLASHING VIA USB CABLE:

Quote:

- To set the phone to flash mode follow the steps below:

1. Phone off with battery (without the USB cable connected to the phone)
2. Hold the (-) the volume down key + number 9 (nine) for a few seconds and then plug the USB cable to the phone.
3. Release the keys of the volume and number 9

Procedure to write the flash file via USB CABLE:

- Select your phone model eg Mxx10
- Select the-------->USB SPEED <---------
- Select the COM port set up after connecting the phone to the PC FLASH MODE eg COM11
- Select the files
- Click on the button FIRMWARE and wait the end.

2. FLASHING VIA RJ45 COM CABLE for DEAD OR ERASED PHONES:

Quote:

Need make special RJ45 cable with pinouts:

Procedure to write the flash file via RJ45 CABLE:
- Select your phone model eg Mxx10
- Select the COM port of RJ45 cable or BOX Port if you using BOX port.
- Select the speed.
- Select the files
- Click on the button FIRMWARE and wait the end.

01-03-2012, 08:09	#1 (permalink)
aZimBahar Product Manager Join Date: Dec 2009 Location: CEO.of.ROMDevelopers Age: 32 Posts: 15,992 Member: 1174508 Status: Offline Sonork: 100.1593820 Thanks Meter: 11,978	samsung m2513 flash problem . i have a samsung m2513 it hang on opening how to solve what is boot mode ? i need help . . . waiting for reply . . .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44

01-10-2012, 14:17	#3 (permalink)
maktel mobile Crazy Poster Join Date: Apr 2008 Posts: 50 Member: 747986 Status: Offline Thanks Meter: 3	How to boot key. please help.