Samsung S7 G930v FRP locked,succesfully removed. - GSM-Forum

smorbe · 07-28-2017, 14:02

Hi just wanna share this simple trick.

Samsung S7 G930v FRP locked,succesfully removed.

Info:

1, S7 G930v Verizon
2, 6.0.1 version
3, fresh from format
4, No Combi File needed.
5, No bypass app needed.

Procedure.

1,Hold power+volume up+home button, to enter Download Mode.
2,press power+volume down to enter this feature.(the phone will restart).

3,press volume to navigate,home button to select.
4,select (usb debug mode) "Usb debugging to "ON"..(#5).

5,restart and back to Download MOde
6,install ADB driver.
7,Press Reset FRP.

8,dont restart, just set up the phone,go to setting and "ON OEM".
9,reset all and erase.

Done.

sonymobile.jpj · 09-12-2017, 13:10

but not show debug option pleaswe help

cellzonex · 02-16-2018, 03:46

Quote:

Originally Posted by sonymobile.jpj

but not show debug option pleaswe help

downgrade to 6.0.1 and then try again

donniegalaxy2 · 02-23-2018, 05:27

Quote:

Originally Posted by cellzonex

downgrade to 6.0.1 and then try again

what firmware should I use to downgrade?

diddygy · 02-23-2018, 06:06

Quote:

Originally Posted by donniegalaxy2

what firmware should I use to downgrade?

Look in photo is write model firmware

BillA · 02-23-2018, 11:14

This is for old firmware versions, new ones >7.0.0 have the adb option removed, so don't waste your time.
Also, the instructions are wrong, first you have to enter download mode by Vol Down + Home + Power, release all then press Home twice.
Finally hold Vol Down + Power only for about 5 seconds then release power only till the menu appears.

donniegalaxy2 · 02-26-2018, 03:39

Quote:

Originally Posted by BillA

This is for old firmware versions, new ones >7.0.0 have the adb option removed, so don't waste your time.
Also, the instructions are wrong, first you have to enter download mode by Vol Down + Home + Power, release all then press Home twice.
Finally hold Vol Down + Power only for about 5 seconds then release power only till the menu appears.

The instructions are correct and i was able to downgrade and get the 5th option

z3x box says

Operation: Reset FRP/React/EE
Selected model: SM-G930V
Selected port: COM5 Z3X BOX Serial Port
Software version: 30.8

Checking local file... OK
Searching server... OK
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM3 detected
Setup connection... OK
Reading data from phone... OK
Sending data to phone... OK
Waiting ADB device... timeout
Phone not found
Done with Samsung Tool PRO v.30.8

I don't know how to "Enable ADB"

donniegalaxy2 · 02-26-2018, 04:27

Ok, I got it...

1)Maintenance Mode/5)Enable USB Debugging.
2)Download Mode/Reset FRP_React_EE
3)Once it starts "Waiting for ADB" let it boot to recovery/Factory reset/Reboot

Hopefully Your computer recognises the ADB before time runs out and Z3X box handles the rest!

4)It will ask if you want to restore original kernel and I selected Yes.

And the rest is history...

Operation: Reset FRP/React/EE
Selected model: SM-G930V
Selected port: COM5 Z3X BOX Serial Port
Software version: 30.8

Checking local file... OK
Searching server... OK
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM3 detected
Setup connection... OK
Reading data from phone... OK
Sending data to phone... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-G930V
Android version: 6.0.1
Product code:
Phone version:
PDA version: G930VVRU4API3
CSC version: G930VVZW4API3
CSC country code: USA
CSC sales code: VZW
HW version:
Phone SN: RF8H92MXE1J
Chip name: MSM8996
Modem board:
Security patch: 2016-10-01
RF cal date:
IMEI:
Checking Super user right... true
Erasing FRP... OK
Checking local file... OK
Searching server... OK
Compare local and server file... OK (up to date)

Done with Samsung Tool PRO v.30.8

BillA · 02-27-2018, 22:53

Quote:

Originally Posted by donniegalaxy2

Ok, I got it...
1)Maintenance Mode/5)Enable USB Debugging.
2)Download Mode/Reset FRP_React_EE
3)Once it starts "Waiting for ADB" let it boot to recovery/Factory reset/Reboot

Firmware version G930V-VRU4API3 v6.0.1 is considered "old", but newer ones starting with VRU4BQxx v7.0.0 DO NOT have the ADB-enable option in the maintenance menu, so you must use either a combination or eng-boot to enable adb. This will soon be closed with the introduction of the new RMM security which works independantly from OEM-Unlock... basically it won't let you flash anything else but official stock firmware ... it's gonna be a bitch !! FYI

Eng Katumba · 03-31-2018, 14:52

Thanks it worked ; first put phone in download mode then hold volume down and power until the phone restart , enable debugging using home button finally use z3x to rest frp

saadishaikh · 03-31-2018, 16:32

simple way just write engroot g930v p any vaarriat simple reset frp

salis210 · 06-14-2018, 17:24

ok 100% thank you good job

Inspire Mobile™ · 06-30-2018, 11:57

[ 6/30/2018 4:10:49 PM ] Software version: 32.7
[ 6/30/2018 4:10:49 PM ]
[ 6/30/2018 4:10:50 PM ] You must activate ADB before reset FRP Yes
[ 6/30/2018 4:10:51 PM ] Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
[ 6/30/2018 4:10:52 PM ] Waiting ADB device... OK
[ 6/30/2018 4:10:53 PM ] Reading phone info...
[ 6/30/2018 4:10:54 PM ] Model: SM-G930V
[ 6/30/2018 4:10:54 PM ] Android version: 6.0.1
[ 6/30/2018 4:10:54 PM ] PDA version: G930VVRS4APH1
[ 6/30/2018 4:10:55 PM ] CSC version: G930VVZW4APH1
[ 6/30/2018 4:10:55 PM ] Phone version: G930VVRS4APH1
[ 6/30/2018 4:10:55 PM ] Product code: Not Active
[ 6/30/2018 4:10:56 PM ] CSC country code: USA
[ 6/30/2018 4:10:56 PM ] CSC sales code: VZW
[ 6/30/2018 4:10:56 PM ] Phone SN: RF8H81T891J
[ 6/30/2018 4:10:57 PM ] IMEI: 3534250---------
[ 6/30/2018 4:10:57 PM ] HW version: REV0.6
[ 6/30/2018 4:10:57 PM ] RF cal date: 2016.08.18
[ 6/30/2018 4:10:58 PM ] Chip name: MSM8996
[ 6/30/2018 4:10:58 PM ] Modem board: MSM8996
[ 6/30/2018 4:10:58 PM ] Security patch: 2016-09-01
[ 6/30/2018 4:10:59 PM ] Boot Warranty bit: 0
[ 6/30/2018 4:10:59 PM ] Bypass FRP... OK
[ 6/30/2018 4:11:01 PM ] For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Fragga · 06-30-2018, 16:27

ANY SOLUTION for latest firmwares (G930VVRU4CRE5_VZW4CRE5) ? I am failing to remove FRP ,I cant downgrade (SW REV CHECK FAIL)

vapyo_2005 · 06-30-2018, 17:38

ok 100% thank you good job

07-28-2017, 14:02	#1 (permalink)
smorbe Freak Poster Join Date: Apr 2005 Age: 45 Posts: 441 Member: 132735 Status: Offline Thanks Meter: 88	Samsung S7 G930v FRP locked,succesfully removed. Hi just wanna share this simple trick. Samsung S7 G930v FRP locked,succesfully removed. Info: 1, S7 G930v Verizon 2, 6.0.1 version 3, fresh from format 4, No Combi File needed. 5, No bypass app needed. Procedure. 1,Hold power+volume up+home button, to enter Download Mode. 2,press power+volume down to enter this feature.(the phone will restart). 3,press volume to navigate,home button to select. 4,select (usb debug mode) "Usb debugging to "ON"..(#5). 5,restart and back to Download MOde 6,install ADB driver. 7,Press Reset FRP. 8,dont restart, just set up the phone,go to setting and "ON OEM". 9,reset all and erase. Done.

09-12-2017, 13:10	#2 (permalink)
sonymobile.jpj Junior Member Join Date: Feb 2016 Posts: 39 Member: 2536765 Status: Offline Thanks Meter: 0	but no show but not show debug option pleaswe help

02-23-2018, 11:14	#6 (permalink)
BillA No Life Poster Join Date: Nov 2004 Location: USA Posts: 1,207 Member: 92260 Status: Offline Thanks Meter: 843	This is for old firmware versions, new ones >7.0.0 have the adb option removed, so don't waste your time. Also, the instructions are wrong, first you have to enter download mode by Vol Down + Home + Power, release all then press Home twice. Finally hold Vol Down + Power only for about 5 seconds then release power only till the menu appears.

02-26-2018, 04:27	#8 (permalink)
donniegalaxy2 Insane Poster Join Date: Feb 2014 Location: Spokane, WA USA Age: 52 Posts: 63 Member: 2121706 Status: Offline Thanks Meter: 3	Ok, I got it... 1)Maintenance Mode/5)Enable USB Debugging. 2)Download Mode/Reset FRP_React_EE 3)Once it starts "Waiting for ADB" let it boot to recovery/Factory reset/Reboot Hopefully Your computer recognises the ADB before time runs out and Z3X box handles the rest! 4)It will ask if you want to restore original kernel and I selected Yes. And the rest is history... Operation: Reset FRP/React/EE Selected model: SM-G930V Selected port: COM5 Z3X BOX Serial Port Software version: 30.8 Checking local file... OK Searching server... OK Compare local and server file... OK (up to date) Searching USB Flash interface... COM3 detected Setup connection... OK Reading data from phone... OK Sending data to phone... OK Waiting ADB device... OK Reading phone info... Model: SM-G930V Android version: 6.0.1 Product code: Phone version: PDA version: G930VVRU4API3 CSC version: G930VVZW4API3 CSC country code: USA CSC sales code: VZW HW version: Phone SN: RF8H92MXE1J Chip name: MSM8996 Modem board: Security patch: 2016-10-01 RF cal date: IMEI: Checking Super user right... true Erasing FRP... OK Checking local file... OK Searching server... OK Compare local and server file... OK (up to date) Done with Samsung Tool PRO v.30.8

03-31-2018, 14:52	#10 (permalink)
Eng Katumba Major Poster Join Date: Feb 2015 Location: In KIgali currently Posts: 42 Member: 2349214 Status: Offline Thanks Meter: 8	Thanks it worked ; first put phone in download mode then hold volume down and power until the phone restart , enable debugging using home button finally use z3x to rest frp

03-31-2018, 16:32	#11 (permalink)
saadishaikh No Life Poster Join Date: Dec 2015 Location: pakistan Age: 27 Posts: 644 Member: 2498409 Status: Offline Thanks Meter: 127	simple way just write engroot g930v p any vaarriat simple reset frp

06-14-2018, 17:24	#12 (permalink)
salis210 Junior Member Join Date: Oct 2014 Posts: 39 Member: 2280652 Status: Offline Thanks Meter: 2	ok 100% thank you good job

06-30-2018, 16:27	#14 (permalink)
Fragga No Life Poster Join Date: Feb 2011 Location: Android Modding Posts: 932 Member: 1507693 Status: Offline Thanks Meter: 131	ANY SOLUTION for latest firmwares (G930VVRU4CRE5_VZW4CRE5) ? I am failing to remove FRP ,I cant downgrade (SW REV CHECK FAIL)

06-30-2018, 17:38	#15 (permalink)
vapyo_2005 Freak Poster Join Date: Feb 2007 Location: مصر Posts: 132 Member: 453823 Status: Offline Thanks Meter: 21	ok 100% thank you good job