Samsung Tool 30.1 PRO released. New method for read codes even knox 1 - Page 11 - GSM-Forum

Amro Lamri Lamr · 11-27-2017, 13:42

nice update z3x team......

abumaha · 11-27-2017, 14:12

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-T580
Software version: 30.0

File analysis... OK
Total file size: 0x84D61031 (2125 Mb)
Searching USB Flash interface... COM13 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending boot.img... OK
Sending recovery.img... error timeout

Done with Samsung Tool PRO v.30.0

abumaha · 11-27-2017, 14:59

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-T580
Software version: 30.1

File analysis... OK
Total file size: 0x3F85ADA8 (1016 Mb)
Searching USB Flash interface... COM13 detected
Setup connection... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending param.bin... error timeout

Done with Samsung Tool PRO v.30.1

mustafasayad · 11-27-2017, 16:40

Nice Update. But Make something easy to use. In future All are going to make service by Only Credits. Ok but make it a bit cheap too for us to use your service. thanks

Sarvechali · 11-27-2017, 19:15

Quote:

Originally Posted by blang

Samsung Tool 30.1 PRO released. New method for read codes even knox 1

Added:

addition support SM-J326az (New method Read codes via sever with any knox) - first in the world
addition support SM-J327a (New method Read codes via sever with any knox)- first in the world
addition support SM-J327az (New method Read codes via sever with any knox)- first in the world
addition support SM-J330f (New method Read codes via sever with any knox)- first in the world
addition support SM-J330fn (New method Read codes via sever with any knox)- first in the world
addition support SM-J330g (New method Read codes via sever with any knox)- first in the world
addition support SM-J330I (New method Read codes via sever with any knox)- first in the world
addition support SM-J330n (New method Read codes via sever with any knox)- first in the world

Fixed:
- Read codes on some G920x, g925x (error 4)
- Fixed J727p unlock.

P.S. Black FRIDAY Promo extended for 1 day more.

P.S2. Funny to see how copy pasters add our solution step by step.
But Big surprise they will see soon.

Facebook Z3X Team news: HERE

Attention: If you have message "product not activate in this card" on version 30.0. Run last Shell, press Wizard and activation.
Thats all.

plzz z3x team update frp reset methods some models not erase frp succesfuly

add fworlds first update for frp

musa12 · 11-27-2017, 20:17

Quote:

Originally Posted by ddilshod93

I try downgrade modem. but null result

Waiting ADB device... OK
Reading phone info...
Model: SM-J727P
Android version: 7.0
Product code: Not Active
Phone version: J727PVPU1AQB9
PDA version: J727PVPU2AQI3
CSC version: J727PSPT2AQI3
CSC country code: USA
CSC sales code: BST
HW version: J727P.02
Phone SN: 00000000000
Modem board: MSM8953
Security patch: 2017-08-01
RF cal date: 2017.03.30
IMEI: 3535590xxxxxxxx3
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... error

my friend just flash the the phone comp file then do unlock after reflash baCK THE PHONE DONE
Done with Samsung Tool PRO v.30.0

Waiting ADB device... OK
Model: SM-J727P
Android version: 7.0
Product code: Not Active
Phone version: J727PVPU2AQI1
PDA version: FA70_J727PVPU2AQI1
CSC version:
CSC country code:
CSC sales code:
HW version: J727P.02
Phone SN: 00000000000
Modem board: MSM8953
Security patch: 2017-01-01
RF cal date: 2017.04.17
IMEI: 35355908xxxxxxx
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

maero2014 · 11-27-2017, 20:20

best team ever please add ufs frp
add unlock t mobile unlock app another team found it

musa12 · 11-27-2017, 20:24

Quote:

Originally Posted by blang

Samsung Tool 30.1 PRO released. New method for read codes even knox 1

Added:

addition support SM-J326az (New method Read codes via sever with any knox) - first in the world
addition support SM-J327a (New method Read codes via sever with any knox)- first in the world
addition support SM-J327az (New method Read codes via sever with any knox)- first in the world
addition support SM-J330f (New method Read codes via sever with any knox)- first in the world
addition support SM-J330fn (New method Read codes via sever with any knox)- first in the world
addition support SM-J330g (New method Read codes via sever with any knox)- first in the world
addition support SM-J330I (New method Read codes via sever with any knox)- first in the world
addition support SM-J330n (New method Read codes via sever with any knox)- first in the world

Fixed:
- Read codes on some G920x, g925x (error 4)
- Fixed J727p unlock.

P.S. Black FRIDAY Promo extended for 1 day more.

P.S2. Funny to see how copy pasters add our solution step by step.
But Big surprise they will see soon.

Facebook Z3X Team news: HERE

Attention: If you have message "product not activate in this card" on version 30.0. Run last Shell, press Wizard and activation.
Thats all.

UNLOCKING J727P U2 DONE
1- FLASH THE PHONE WITH COMBINATION U2 GOOGLE IT
2- DO THE UNLOCK
3-REFLASH THE PHONE DONE
4- NO NEED FOR ROOT
5 LINK https:// androidfilehost.com/?fid=817906626617947530
[ 11/27/2017 1:04:00 PM ] Waiting ADB device... OK
[ 11/27/2017 1:04:00 PM ] Reading phone info...
[ 11/27/2017 1:04:00 PM ] Model: SM-J727P
[ 11/27/2017 1:04:00 PM ] Android version: 7.0
[ 11/27/2017 1:04:00 PM ] Product code: Not Active
[ 11/27/2017 1:04:00 PM ] Phone version: J727PVPU2AQI1
[ 11/27/2017 1:04:00 PM ] PDA version: FA70_J727PVPU2AQI1
[ 11/27/2017 1:04:00 PM ] CSC version:
[ 11/27/2017 1:04:00 PM ] CSC country code:
[ 11/27/2017 1:04:00 PM ] CSC sales code:
[ 11/27/2017 1:04:00 PM ] HW version: J727P.02
[ 11/27/2017 1:04:00 PM ] Phone SN: 00000000000
[ 11/27/2017 1:04:00 PM ] Modem board: MSM8953
[ 11/27/2017 1:04:00 PM ] Security patch: 2017-01-01
[ 11/27/2017 1:04:00 PM ] RF cal date: 2017.04.17
[ 11/27/2017 1:04:00 PM ] IMEI: 3535XXXXXXXX
[ 11/27/2017 1:04:00 PM ] Writing AT RIL... OK
[ 11/27/2017 1:04:00 PM ] Initialization AT RIL... OK
[ 11/27/2017 1:04:00 PM ] Unlocking... OK
[ 11/27/2017 1:04:00 PM ] Rebooting phone... OK
[ 11/27/2017 1:04:00 PM ] Unlock done

qtouch · 11-27-2017, 20:29

Quote:

Originally Posted by shaansara

after update 30.0 pro tool say card not activated.
how to solve please help z3x team.

Attention: If you have message "product not activate in this card" on version 30.0. Run last Shell, press Wizard and activation.
Thats all.

edwardv1 · 11-27-2017, 23:42

UNLOCK INSTRUCCIONES:
Domestic Unlock:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock Domestic' button.

To reset Google account activation or Samsung reactivation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Unlock
Selected model: SM-J727P
Software version: 30.1

Waiting ADB device...
Por favor, permite la depuración USB en el teléfono... Listo
Leyendo información del teléfono ...
Modelo: SM-J727P
Android version: 7.0
Código del Producto: Not Active
Versión del telefono: J727PVPU1AQB8
PDA version: FA70_J727PVPU1AQB5
CSC version:
Código de país CSC:
Código de Venta CSC:
HW version: J727P.02
Phone SN: 00000000000
Módem: MSM8953
Security patch: 2017-01-01
RF cal date: 2017.04.29
IMEI: 353559082556540
Writing AT RIL... Listo
Initialization AT RIL... Listo
Desbloquear... Listo
Reiniciando teléfono ... Listo
Desbloqueo Listo

Done with Samsung Tool PRO v.30.1

Only need flash a combination file and done

ian_ramos · 11-28-2017, 07:39

SM-A520F Read unlock Code Working Done............

Operation: Read Codes via Server
Selected model: SM-A520F
Software version: 30.1

Checking Login and Password... OK
Ballance: 45 crd.
You have 45 credit(s) left. This opreratin takes 5 credits.Continue? Yes
Searching Samsung modem... detected COM53
Reading phone info... OK
Model: SM-A520F
AP version: A520FXXU2AQG6
CSC version: A520FOJV2AQG1
CP version: A520FXXU2AQF5
Product code: SM-A520FZDDKSA
Phone SN: R28J11A14KN
Unique number: CBJ106A1BE8ECB3
Searching Samsung diag port... detected COM52
Reading phone info... OK
CP version: A520FXXU2AQF5
CP build: Jun 9 2017 13:52:16
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 50271579
NET lock: 84824629
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

mcclinic · 11-28-2017, 07:43

J701F Binary 2, Firmware Not found.

PERVEZKHAN · 11-28-2017, 10:42

sir whear is frp option on g530h in new exe

Gharswild · 11-28-2017, 13:32

Yesterday i have samsung A720f 7.0 version i use to unlock via server but z3x box say" Knox is Void...

i cant unlock even if i have server credit

So plz ADD Unlock via server even if KNOX VOID...

Thanks In Advance Z3x Team...

lexisvz · 11-28-2017, 19:13

Thank Z3X team...nice update...

Waiting ADB device... OK
Reading phone info...
Model: SM-J727P
Android version: 7.0
Product code: Not Active
Phone version: J727PVPU1AQB9
PDA version: J727PVPU1AQB9
CSC version: J727PSPT1AQB9
CSC country code: USA
CSC sales code: XAS
HW version: J727P.02
Phone SN: 00000000000
Modem board: MSM8953
Security patch: 2017-02-01
RF cal date: 2017.06.27
IMEI:
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.30.1

11-27-2017, 14:12	#152 (permalink)
abumaha Freak Poster Join Date: Mar 2013 Posts: 320 Member: 1908127 Status: Offline Thanks Meter: 14	can not flash why FLASH INSTRUCTIONS: 1. Choose correct flash file(s). 2. If you have PIT file chosen, then you must check 'Repartition' option. 3. Check flashing options if needed (Repartition, EFS clear, Boot update). 4. Power on the phone in download mode (turn off phone, press vol.down + home + power). 5. Connect the phone to PC with USB cable, install drivers if needed. 6. Press 'Flash' button. Operation: Flash Selected model: SM-T580 Software version: 30.0 File analysis... OK Total file size: 0x84D61031 (2125 Mb) Searching USB Flash interface... COM13 detected Setup connection... OK Set PIT file... OK Reading PIT from phone... OK Sending boot.img... OK Sending recovery.img... error timeout Done with Samsung Tool PRO v.30.0

11-27-2017, 14:59	#153 (permalink)
abumaha Freak Poster Join Date: Mar 2013 Posts: 320 Member: 1908127 Status: Offline Thanks Meter: 14	look blang FLASH INSTRUCTIONS: 1. Choose correct flash file(s). 2. If you have PIT file chosen, then you must check 'Repartition' option. 3. Check flashing options if needed (Repartition, EFS clear, Boot update). 4. Power on the phone in download mode (turn off phone, press vol.down + home + power). 5. Connect the phone to PC with USB cable, install drivers if needed. 6. Press 'Flash' button. Operation: Flash Selected model: SM-T580 Software version: 30.1 File analysis... OK Total file size: 0x3F85ADA8 (1016 Mb) Searching USB Flash interface... COM13 detected Setup connection... OK Reading PIT from phone... OK Sending sboot.bin... OK Sending param.bin... error timeout Done with Samsung Tool PRO v.30.1

11-27-2017, 13:42	#151 (permalink)
Amro Lamri Lamr Insane Poster Join Date: Aug 2015 Posts: 67 Member: 2443309 Status: Offline Thanks Meter: 14	nice update z3x team......

11-27-2017, 16:40	#154 (permalink)
mustafasayad Freak Poster Join Date: Feb 2017 Location: Balochistan Posts: 145 Member: 2682425 Status: Offline Thanks Meter: 66	Nice Update. But Make something easy to use. In future All are going to make service by Only Credits. Ok but make it a bit cheap too for us to use your service. thanks

11-27-2017, 20:20	#157 (permalink)
maero2014 Insane Poster Join Date: Feb 2017 Location: cairo Posts: 91 Member: 2689141 Status: Offline Thanks Meter: 15	best team ever please add ufs frp add unlock t mobile unlock app another team found it

11-27-2017, 23:42	#160 (permalink)
edwardv1 Crazy Poster Join Date: Feb 2012 Location: Dominical republic Posts: 55 Member: 1722022 Status: Offline Sonork: edward Thanks Meter: 8	UNLOCK INSTRUCCIONES: Domestic Unlock: 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options', tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock Domestic' button. To reset Google account activation or Samsung reactivation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.) Operation: Unlock Selected model: SM-J727P Software version: 30.1 Waiting ADB device... Por favor, permite la depuración USB en el teléfono... Listo Leyendo información del teléfono ... Modelo: SM-J727P Android version: 7.0 Código del Producto: Not Active Versión del telefono: J727PVPU1AQB8 PDA version: FA70_J727PVPU1AQB5 CSC version: Código de país CSC: Código de Venta CSC: HW version: J727P.02 Phone SN: 00000000000 Módem: MSM8953 Security patch: 2017-01-01 RF cal date: 2017.04.29 IMEI: 353559082556540 Writing AT RIL... Listo Initialization AT RIL... Listo Desbloquear... Listo Reiniciando teléfono ... Listo Desbloqueo Listo Done with Samsung Tool PRO v.30.1 Only need flash a combination file and done

11-28-2017, 07:39	#161 (permalink)
ian_ramos No Life Poster Join Date: Aug 2006 Location: Dhahran ph Posts: 568 Member: 334094 Status: Offline Sonork: none Thanks Meter: 73	SM-A520F Read unlock Code Working Done............ Operation: Read Codes via Server Selected model: SM-A520F Software version: 30.1 Checking Login and Password... OK Ballance: 45 crd. You have 45 credit(s) left. This opreratin takes 5 credits.Continue? Yes Searching Samsung modem... detected COM53 Reading phone info... OK Model: SM-A520F AP version: A520FXXU2AQG6 CSC version: A520FOJV2AQG1 CP version: A520FXXU2AQF5 Product code: SM-A520FZDDKSA Phone SN: R28J11A14KN Unique number: CBJ106A1BE8ECB3 Searching Samsung diag port... detected COM52 Reading phone info... OK CP version: A520FXXU2AQF5 CP build: Jun 9 2017 13:52:16 Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 50271579 NET lock: 84824629 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625#

11-28-2017, 07:43	#162 (permalink)
mcclinic No Life Poster Join Date: Sep 2007 Location: Earth Posts: 902 Member: 593876 Status: Offline Thanks Meter: 302	J701F Binary 2, Firmware Not found.

11-28-2017, 10:42	#163 (permalink)
PERVEZKHAN Insane Poster Join Date: Sep 2007 Location: PAKISTAN MULTAN MUZAFAR GHARH Posts: 92 Member: 580309 Status: Offline Sonork: NO HAVE Thanks Meter: 21	sir whear is frp option on g530h in new exe

11-28-2017, 13:32	#164 (permalink)
Gharswild Freak Poster Join Date: May 2007 Location: Inside You Posts: 353 Member: 513210 Status: Offline Thanks Meter: 110	Yesterday i have samsung A720f 7.0 version i use to unlock via server but z3x box say" Knox is Void... i cant unlock even if i have server credit So plz ADD Unlock via server even if KNOX VOID... Thanks In Advance Z3x Team...

11-28-2017, 19:13	#165 (permalink)
lexisvz Insane Poster Join Date: Oct 2016 Posts: 65 Member: 2636022 Status: Offline Thanks Meter: 13	Thank Z3X team...nice update... Waiting ADB device... OK Reading phone info... Model: SM-J727P Android version: 7.0 Product code: Not Active Phone version: J727PVPU1AQB9 PDA version: J727PVPU1AQB9 CSC version: J727PSPT1AQB9 CSC country code: USA CSC sales code: XAS HW version: J727P.02 Phone SN: 00000000000 Modem board: MSM8953 Security patch: 2017-02-01 RF cal date: 2017.06.27 IMEI: Writing AT RIL... OK Initialization AT RIL... root required Checking Super user right... true Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.30.1