Samsung Tool Pro 27.7. Last 2016 year update and New year Update - Page 8 - GSM-Forum

androider87 · 12-31-2016, 20:42

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Repair DRK
Selected model: SM-G920T
Software version: 27.7

Checking local file... Ok
Searching server... Ok
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM6 detected
Setup connection... Ok
Reading data from phone... Ok
Sending data to phone... Ok
Sending data to phone... Ok
Waiting ADB device... Ok
Reading phone info...
Recovery build version: 6.0.1
Boot version: G920TUES5DPI2
Platform: exynos7420
Boot serial: 06157df628e00b03
Product board: zerolte
Initialization zTool... Ok
Running zTool, please wait...
Start... Ok
Initialization... Ok
Generate and check client proof... Ok
Verify proof by client... Ok
Checking DRK status... NG!
Writing DRK... error (error(5.6.-14))

Done with Samsung Tool PRO v.27.7

please help me understand the issue keep getting this error

teng1019 · 01-01-2017, 03:35

help how to unlock samsung j710f?

rajuaryal18 · 01-01-2017, 10:22

Many Many Happy New Year all Z3X Team!

rajuaryal18 · 01-01-2017, 10:49

Z3x Team should think that as soon as possible why J510 series not support network unlock? everything is good going on but that is not good we are not happy.

mobilaemmanuel · 01-01-2017, 19:45

Good update z3x team.

nasermmx5855 · 01-01-2017, 21:15

hello sir many model frp not done & u give the combination file not good many phones r damege ..give good update files &support

ydemir95 · 01-01-2017, 21:17

Thanks Z3X Team happy new year

shadi1979 · 01-02-2017, 08:54

Best samsung team thank you

xahin · 01-02-2017, 13:42

Operation: Unlock
Selected model: SM-G570F
Software version: 27.7

Waiting ADB device...
Please, allow USB debugging on phone... Ok
Reading phone info...
Model: SM-G570F
Android version: 6.0.1
Product code: SM-G570FZDDKSA
Phone version: G570FXXU1API9
PDA version: G570FXXU1APIB
CSC version: G570FOJV1APIB
CSC country code: KSA
CSC sales code: KSA
HW version: MP 0.500
Phone SN: R28HA2YG0DZ
Chip name: EXYNOS7570
Modem board: SHANNON305
RF cal date: 20161025
IMEI:
Checking Super user right... true
Reading NV data... Ok
Checking NV data... Ok
Initialization zTool... Ok
Running zTool, please wait...
Start... Ok
Initialization... Ok
Generate and check client proof... Ok
Verify proof by client... Ok
Reading data from phone... Ok
Modem board: SHANNON305
HWID: F4 AA E1 62 8C 55 C0 F8 CC 3B C1 7E 0A 00 00 00
Calculating... Ok
Unlocking... Ok
Writing NV data... Ok
Rebooting phone... Ok
Unlock done

Done with Samsung Tool PRO v.27.7

thanks team

otherboy123 · 01-02-2017, 14:38

SM-J210f unlock fail plz help
Operation: Unlock
Selected model: SM-J210F
Software version: 27.7

Searching Samsung modem... not found

Done with Samsung Tool PRO v.27.7

Patch certificate fail
Selected model: SM-J210F
Software version: 27.7

Waiting ADB device... Ok
Reading phone info...
Model: SM-J210F
Android version: 6.0.1
Product code: SM-J210FZSDINS
Phone version: J210FXXU0APF6
PDA version: J210FXXU0APF4
CSC version: J210FODD0APF3
CSC country code: India
CSC sales code: INS
HW version: MP 0.200
Phone SN:
Modem board: SC9830i
RF cal date: 2016.07.02
IMEI:
Checking Super user right... true
Reading data from phone... Ok
Patching CERT check... error
MSL patch not found
Done with Samsung Tool PRO v.27.7

koby1p · 01-02-2017, 16:13

G900f please you update 6.0.1

labik · 01-02-2017, 16:16

Operation: Reset FRP/React/EE
Selected model: SM-G935F
Software version: 27.7

Checking local file... OK
Searching server... OK
Compare local and server file... OK (up to date)
Searching USB Flash Interface... detected COM33
Setup connection... OK
Reading data from phone... OK
Sending data to phone... OK
Waiting ADB device... time out
Phone not found

Done with Samsung Tool PRO v.27.7

Phone still on start logo

GSM@FLASHER · 01-02-2017, 16:53

Boom update.z3x team is great.

mohacraft · 01-02-2017, 18:18

[QUOTE=blang;12250100][B][COLOR="Red"][SIZE="5"]

briguns · 01-02-2017, 21:34

Operation: Write CERT
Selected model: SM-G360M
Selected port: COM382 SAMSUNG Mobile USB Serial Port
Software version: 27.7

Checking CERT file... Ok
KEY ID: 0274
Waiting ADB device... Ok
Reading phone info...
Model: SM-G360M
Android version: 5.0.2
Product code: SM-G360MZWDTPA
Phone version: G360MUBU1BPH1
PDA version: G360MUBU1BPI2
CSC version: G360MUUB1BPI1
CSC country code: PANAMA
CSC sales code: TPA
HW version: MP 0.300
Phone SN: R28G60LL9MH
Modem board: MSM8916
RF cal date: 2015.06.06
IMEI:
Writing AT RIL... Ok
Initialization AT RIL... error (11)
Done with Samsung Tool PRO v.27.7

01-02-2017, 16:13	#116 (permalink)
koby1p Junior Member Join Date: Mar 2014 Posts: 32 Member: 2146997 Status: Offline Thanks Meter: 2	G900g G900f please you update 6.0.1

01-02-2017, 18:18	#119 (permalink)
mohacraft Freak Poster Join Date: Apr 2015 Location: Tétouan Age: 38 Posts: 233 Member: 2377800 Status: Offline Sonork: nono Thanks Meter: 48	J200f patch cert not supported yet ? [QUOTE=blang;12250100][B][COLOR="Red"][SIZE="5"]

12-31-2016, 20:42	#106 (permalink)
androider87 Major Poster Join Date: Sep 2015 Location: usa Posts: 40 Member: 2455740 Status: Offline Thanks Meter: 0	REPAIR INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Fill values what you need to repair. 6. Press 'Repair' button. 7. Press 'Patch Certificate' if you have network problem after repairing. 7. Press 'Reset EFS' if you need to reset it. Be carefully, do not perform this without necessity. Backup will be created automatically. Repair DRK (Use it if you have DRK damaged (phone stuck on boot)): 1. Power on phone in download mode (turn off phone, hold vol.down + Camera + Power). 2. Connect phone to PC with USB cable, install drivers if needed. 3. Press 'Repair DRK' button. Operation: Repair DRK Selected model: SM-G920T Software version: 27.7 Checking local file... Ok Searching server... Ok Compare local and server file... OK (up to date) Searching USB Flash interface... COM6 detected Setup connection... Ok Reading data from phone... Ok Sending data to phone... Ok Sending data to phone... Ok Waiting ADB device... Ok Reading phone info... Recovery build version: 6.0.1 Boot version: G920TUES5DPI2 Platform: exynos7420 Boot serial: 06157df628e00b03 Product board: zerolte Initialization zTool... Ok Running zTool, please wait... Start... Ok Initialization... Ok Generate and check client proof... Ok Verify proof by client... Ok Checking DRK status... NG! Writing DRK... error (error(5.6.-14)) Done with Samsung Tool PRO v.27.7 please help me understand the issue keep getting this error

01-01-2017, 03:35	#107 (permalink)
teng1019 Junior Member Join Date: Jan 2017 Posts: 1 Member: 2667342 Status: Offline Thanks Meter: 1	help how to unlock samsung j710f?

01-01-2017, 10:22	#108 (permalink)
rajuaryal18 Junior Member Join Date: Jul 2015 Location: Nepal Posts: 32 Member: 2427980 Status: Offline Sonork: rajuaryal18 Thanks Meter: 3	Many Many Happy New Year all Z3X Team!

01-01-2017, 10:49	#109 (permalink)
rajuaryal18 Junior Member Join Date: Jul 2015 Location: Nepal Posts: 32 Member: 2427980 Status: Offline Sonork: rajuaryal18 Thanks Meter: 3	Z3x Team should think that as soon as possible why J510 series not support network unlock? everything is good going on but that is not good we are not happy.

01-01-2017, 19:45	#110 (permalink)
mobilaemmanuel Crazy Poster Join Date: Jul 2014 Location: GHANA Posts: 54 Member: 2231387 Status: Offline Thanks Meter: 8	Good update z3x team.

01-01-2017, 21:15	#111 (permalink)
nasermmx5855 Insane Poster Join Date: May 2016 Posts: 98 Member: 2579338 Status: Offline Thanks Meter: 21	hello sir many model frp not done & u give the combination file not good many phones r damege ..give good update files &support

01-01-2017, 21:17	#112 (permalink)
ydemir95 Junior Member Join Date: Oct 2016 Posts: 8 Member: 2631898 Status: Offline Thanks Meter: 0	Thanks Z3X Team happy new year

01-02-2017, 08:54	#113 (permalink)
shadi1979 Junior Member Join Date: Oct 2014 Posts: 1 Member: 2273329 Status: Offline Sonork: www.sonork.com Thanks Meter: 0	Best samsung team thank you

01-02-2017, 13:42	#114 (permalink)
xahin Freak Poster Join Date: Jun 2007 Location: OUT OF CONTROL Posts: 276 Member: 536012 Status: Offline Sonork: 100.1660617 Thanks Meter: 120	Operation: Unlock Selected model: SM-G570F Software version: 27.7 Waiting ADB device... Please, allow USB debugging on phone... Ok Reading phone info... Model: SM-G570F Android version: 6.0.1 Product code: SM-G570FZDDKSA Phone version: G570FXXU1API9 PDA version: G570FXXU1APIB CSC version: G570FOJV1APIB CSC country code: KSA CSC sales code: KSA HW version: MP 0.500 Phone SN: R28HA2YG0DZ Chip name: EXYNOS7570 Modem board: SHANNON305 RF cal date: 20161025 IMEI: Checking Super user right... true Reading NV data... Ok Checking NV data... Ok Initialization zTool... Ok Running zTool, please wait... Start... Ok Initialization... Ok Generate and check client proof... Ok Verify proof by client... Ok Reading data from phone... Ok Modem board: SHANNON305 HWID: F4 AA E1 62 8C 55 C0 F8 CC 3B C1 7E 0A 00 00 00 Calculating... Ok Unlocking... Ok Writing NV data... Ok Rebooting phone... Ok Unlock done Done with Samsung Tool PRO v.27.7 thanks team

01-02-2017, 14:38	#115 (permalink)
otherboy123 No Life Poster Join Date: Aug 2013 Location: Yangon Age: 29 Posts: 831 Member: 2006794 Status: Offline Sonork: 100.1664636 Thanks Meter: 164	SM-J210f unlock fail plz help Operation: Unlock Selected model: SM-J210F Software version: 27.7 Searching Samsung modem... not found Done with Samsung Tool PRO v.27.7 Patch certificate fail Selected model: SM-J210F Software version: 27.7 Waiting ADB device... Ok Reading phone info... Model: SM-J210F Android version: 6.0.1 Product code: SM-J210FZSDINS Phone version: J210FXXU0APF6 PDA version: J210FXXU0APF4 CSC version: J210FODD0APF3 CSC country code: India CSC sales code: INS HW version: MP 0.200 Phone SN: Modem board: SC9830i RF cal date: 2016.07.02 IMEI: Checking Super user right... true Reading data from phone... Ok Patching CERT check... error MSL patch not found Done with Samsung Tool PRO v.27.7

01-02-2017, 16:16	#117 (permalink)
labik Freak Poster Join Date: Apr 2004 Location: Poland - Zachpom Age: 50 Posts: 107 Member: 63365 Status: Offline Thanks Meter: 3	Operation: Reset FRP/React/EE Selected model: SM-G935F Software version: 27.7 Checking local file... OK Searching server... OK Compare local and server file... OK (up to date) Searching USB Flash Interface... detected COM33 Setup connection... OK Reading data from phone... OK Sending data to phone... OK Waiting ADB device... time out Phone not found Done with Samsung Tool PRO v.27.7 Phone still on start logo

01-02-2017, 16:53	#118 (permalink)
GSM@FLASHER Insane Poster Join Date: May 2014 Location: BANGLADESH Posts: 85 Member: 2192293 Status: Offline Sonork: 100.1682767 Thanks Meter: 60	Boom update.z3x team is great.

01-02-2017, 21:34	#120 (permalink)
briguns Freak Poster Join Date: Feb 2016 Location: san jose Posts: 119 Member: 2534813 Status: Offline Thanks Meter: 18	Operation: Write CERT Selected model: SM-G360M Selected port: COM382 SAMSUNG Mobile USB Serial Port Software version: 27.7 Checking CERT file... Ok KEY ID: 0274 Waiting ADB device... Ok Reading phone info... Model: SM-G360M Android version: 5.0.2 Product code: SM-G360MZWDTPA Phone version: G360MUBU1BPH1 PDA version: G360MUBU1BPI2 CSC version: G360MUUB1BPI1 CSC country code: PANAMA CSC sales code: TPA HW version: MP 0.300 Phone SN: R28G60LL9MH Modem board: MSM8916 RF cal date: 2015.06.06 IMEI: Writing AT RIL... Ok Initialization AT RIL... error (11) Done with Samsung Tool PRO v.27.7