Samsung Tool Pro 28.7 Update. New phones added, check inside - Page 5 - GSM-Forum

Sab!r Khan · 07-13-2017, 11:31

pls add patch cert for SM-G935F/G935FD on android 7.0

adeelnj1 · 07-13-2017, 11:34

Quote:

Originally Posted by kamal_singla

I'm Still getting same problem in SM-J320ZN

Operation: Read Codes via Server
Selected model: SM-J320ZN
Selected port: COM201 SAMSUNG Mobile USB Serial Port
Software version: 28.7

Checking Login and Password... OK
Ballance: 50 crd.
Waiting ADB device... OK
Reading phone info...
Model: SM-J320ZN
Android version: 5.1.1
Product code: SM-J320ZZWNTLP
Phone version: J320ZNDOU1APK1
PDA version: J320ZNDOS1AQE2
CSC version: J320ZNTLP1AQB1
CSC country code: Australia
CSC sales code: TLP
HW version: MP 0.200
Phone SN: R58H93PMKLT
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-05-01
RF cal date: 2016.09.21
IMEI:
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... error (4.1)
Done with Samsung Tool PRO v.28.7

Same error on my side i try more then 5 mobiles j320ZN even on different opprating systems but still same, so have you got some luck or any solution ???

Salman725626 · 07-13-2017, 11:56

wow good update z3x team please add g570f imei

alexguarin · 07-13-2017, 14:23

Thanks z3x team add more repair of imei and patch cert sm- g532m sm-g570m

abrapy · 07-13-2017, 15:25

useless update... NARNIA PHONES ADDED

when gonna realease updates for INTERNATIONAL PHONES?

BillA · 07-13-2017, 15:44

Quote:

Originally Posted by blang

We not released unlock for G950u, we released G950U code reading via credits.
Before use this method read attention regarding T-mobile and phone ask codes or not.

So for example if you flash a G930A/T G950A/T with "U" firmware and it starts asking for the unlock code, is that supported for server code reading?
Or only original "U" phones which were not flashed from "A/T" to "U"?

jamil k · 07-13-2017, 15:46

how to network unlock SM-A720F
and where buy msl code

Searching Samsung modem... detected COM12
Reading phone info... OK
Model: SM-A720F
AP version: A720FXXU1AQC5
CSC version: A720FOJV1AQC8
CP version: A720FXXU1AQC8
Product code: SM-A720FZDDKSA
Phone SN: R58J4xxxxx
Unique number: CBJ10EDF7xxxxxx
Reading IMEI... OK
IMEI: 3557580xxxxxxxx
Reading SN... OK
Phone SN: R58Jxxxxxx
Enter MSL: canceled
Operation aborted

sajoh · 07-13-2017, 16:15

I ENCOUNTERED SAME PPROBLEM

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will apear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G935A
Selected port: COM132 SAMSUNG Mobile USB Serial Port
Software version: 28.7

Checking Login and Password... OK
Ballance: 50 crd.
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G935A
Android version: 6.0.1
Product code: SM-G935AZSAATT
Phone version: G935AUCS4APK1
PDA version: G935AUCS4APK1
CSC version: G935AATT4APK1
CSC country code: USA
CSC sales code: ATT
HW version: REV0.7
Phone SN: R38H608R13V
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2016-11-01
RF cal date: 2016.06.08
IMEI:
Initialization zTool... error (0)

Done with Samsung Tool PRO v.28.7

ANY SOLUTION PLS

mr786 · 07-13-2017, 16:38

SM-G530A patch cert option not present

freshwhite · 07-13-2017, 17:04

pls add g532f cert patch

.::RONY::. · 07-13-2017, 18:46

Operation: Read Codes via Server
Selected model: SM-J320ZN
Selected port: COM49 SAMSUNG Mobile USB Serial Port
Software version: 28.7

Checking Login and Password... OK
Ballance: 50 crd.
Waiting ADB device... OK
Reading phone info...
Model: SM-J320ZN
Android version: 5.1.1
Product code: SM-J320ZZDNXSA
Phone version: J320ZNDOU1API1
PDA version: J320ZNDOS1AQC1
CSC version: J320ZNXSA1API2
CSC country code: Australia
CSC sales code: XSA
HW version: MP 0.200
Phone SN: R58HB380Z1D
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-03-01
RF cal date: 2016.11.16
IMEI:
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM6 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 74705964
NET lock: 74846079
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.28.7
tnx blang sir

ernestico911 · 07-13-2017, 18:58

Quote:

Originally Posted by sajoh

I ENCOUNTERED SAME PPROBLEM

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will apear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G935A
Selected port: COM132 SAMSUNG Mobile USB Serial Port
Software version: 28.7

Checking Login and Password... OK
Ballance: 50 crd.
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G935A
Android version: 6.0.1
Product code: SM-G935AZSAATT
Phone version: G935AUCS4APK1
PDA version: G935AUCS4APK1
CSC version: G935AATT4APK1
CSC country code: USA
CSC sales code: ATT
HW version: REV0.7
Phone SN: R38H608R13V
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2016-11-01
RF cal date: 2016.06.08
IMEI:
Initialization zTool... error (0)

Done with Samsung Tool PRO v.28.7

ANY SOLUTION PLS

Flash QA6 firmware sir, TESTED it

yasin.55 · 07-13-2017, 19:16

PLZ ADD J500F AND G532F patch cert for this models

yasin.55 · 07-13-2017, 19:18

PLZ ADD G570F patch cert for this models

rodny19 · 07-13-2017, 19:19

its possible to unlock SC-02H with Samsung Tool PRO ? using another model like SC-02J?

07-13-2017, 15:46	#67 (permalink)
jamil k Junior Member Join Date: May 2010 Location: India Posts: 31 Member: 1300346 Status: Offline Thanks Meter: 39	need help how to network unlock SM-A720F and where buy msl code Searching Samsung modem... detected COM12 Reading phone info... OK Model: SM-A720F AP version: A720FXXU1AQC5 CSC version: A720FOJV1AQC8 CP version: A720FXXU1AQC8 Product code: SM-A720FZDDKSA Phone SN: R58J4xxxxx Unique number: CBJ10EDF7xxxxxx Reading IMEI... OK IMEI: 3557580xxxxxxxx Reading SN... OK Phone SN: R58Jxxxxxx Enter MSL: canceled Operation aborted

07-13-2017, 18:46	#71 (permalink)
.::RONY::. Freak Poster Join Date: Aug 2009 Location: bangladesh Age: 34 Posts: 314 Member: 1104393 Status: Offline Sonork: 100.1603062 .::RONY::.. Thanks Meter: 130	j3020zn samsung unlock success here the log Operation: Read Codes via Server Selected model: SM-J320ZN Selected port: COM49 SAMSUNG Mobile USB Serial Port Software version: 28.7 Checking Login and Password... OK Ballance: 50 crd. Waiting ADB device... OK Reading phone info... Model: SM-J320ZN Android version: 5.1.1 Product code: SM-J320ZZDNXSA Phone version: J320ZNDOU1API1 PDA version: J320ZNDOS1AQC1 CSC version: J320ZNXSA1API2 CSC country code: Australia CSC sales code: XSA HW version: MP 0.200 Phone SN: R58HB380Z1D Chip name: MSM8916 Modem board: MSM8916 Security patch: 2017-03-01 RF cal date: 2016.11.16 IMEI: Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM6 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 74705964 NET lock: 74846079 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.28.7 tnx blang sir

07-13-2017, 11:31	#61 (permalink)
Sab!r Khan Junior Member Join Date: Jun 2017 Location: I LOVE MY INDIA Posts: 30 Member: 2723060 Status: Offline Sonork: I Dont Used Thanks Meter: 17	pls add patch cert for SM-G935F/G935FD on android 7.0

07-13-2017, 11:56	#63 (permalink)
Salman725626 Freak Poster Join Date: Nov 2015 Location: Pakistan Age: 24 Posts: 443 Member: 2488001 Status: Offline Sonork: 100.1669288 Thanks Meter: 295	wow good update z3x team please add g570f imei

07-13-2017, 14:23	#64 (permalink)
alexguarin Freak Poster Join Date: Oct 2009 Location: colombia Posts: 158 Member: 1143499 Status: Offline Thanks Meter: 28	Thanks z3x team add more repair of imei and patch cert sm- g532m sm-g570m

07-13-2017, 15:25	#65 (permalink)
abrapy No Life Poster Join Date: Sep 2009 Location: Paraguay Posts: 619 Member: 1110740 Status: Offline Thanks Meter: 383	useless update... NARNIA PHONES ADDED when gonna realease updates for INTERNATIONAL PHONES?

07-13-2017, 16:15	#68 (permalink)
sajoh Junior Member Join Date: Jan 2013 Location: freetown, sierraleone Posts: 34 Member: 1870105 Status: Offline Thanks Meter: 28	I ENCOUNTERED SAME PPROBLEM UNLOCK INSTRUCTIONS: Unlocking with original MSL code: 1. Phone must be powered on. 2. Run dialer and type #0# (service mode will apear). 3. Connect the phone to UART cable, choose correct COM port in port settings. 4. Press 'Unlock' button. 5. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will apear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Read Codes via Server Selected model: SM-G935A Selected port: COM132 SAMSUNG Mobile USB Serial Port Software version: 28.7 Checking Login and Password... OK Ballance: 50 crd. Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-G935A Android version: 6.0.1 Product code: SM-G935AZSAATT Phone version: G935AUCS4APK1 PDA version: G935AUCS4APK1 CSC version: G935AATT4APK1 CSC country code: USA CSC sales code: ATT HW version: REV0.7 Phone SN: R38H608R13V Chip name: MSM8996 Modem board: MSM8996 Security patch: 2016-11-01 RF cal date: 2016.06.08 IMEI: Initialization zTool... error (0) Done with Samsung Tool PRO v.28.7 ANY SOLUTION PLS

07-13-2017, 16:38	#69 (permalink)
mr786 Freak Poster Join Date: Dec 2010 Location: pakistan Age: 37 Posts: 241 Member: 1477840 Status: Offline Sonork: 100.1612459 Thanks Meter: 37	SM-G530A patch cert option not present

07-13-2017, 17:04	#70 (permalink)
freshwhite No Life Poster Join Date: Oct 2004 Location: MOROGORO,TANZANIA Age: 45 Posts: 1,164 Member: 87204 Status: Offline Thanks Meter: 146	pls add g532f cert patch

07-13-2017, 19:16	#73 (permalink)
yasin.55 Freak Poster Join Date: Jan 2012 Location: south africa Posts: 186 Member: 1712315 Status: Offline Sonork: 100.1602299 Thanks Meter: 65	PLZ ADD J500F AND G532F patch cert for this models

07-13-2017, 19:18	#74 (permalink)
yasin.55 Freak Poster Join Date: Jan 2012 Location: south africa Posts: 186 Member: 1712315 Status: Offline Sonork: 100.1602299 Thanks Meter: 65	PLZ ADD G570F patch cert for this models

07-13-2017, 19:19	#75 (permalink)
rodny19 Freak Poster Join Date: Sep 2010 Posts: 238 Member: 1392507 Status: Offline Thanks Meter: 38	its possible to unlock SC-02H with Samsung Tool PRO ? using another model like SC-02J?