GSM-Forum

GSM-Forum (http://forum.gsmhosting.com/vbb/)
-   Z3X-Team Products (http://forum.gsmhosting.com/vbb/f453/)
-   -   SGOLD3 NEW9 the same bug............. (http://forum.gsmhosting.com/vbb/f453/sgold3-new9-same-bug-872034/)

foufou34 12-02-2009 08:10

SGOLD3 NEW9 the same bug.............
 
PMB8878 Module 1.0a started. SW: Ver 2.0.0.38
Connecting to KM900 in UART Mode (COM7 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8868) prebooting...
Release power button. Booting...
Main Loader answer timed OUT!
BOOT Failed
Disconnected.
PMB8878 Module 1.0a started. SW: Ver 2.0.0.38
Connecting to KM900 in UART Mode (COM7 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8868) prebooting...
Release power button. Booting...
Main Loader answer timed OUT!
BOOT Failed
Disconnected.
PMB8878 Module 1.0a started. SW: Ver 2.0.0.38
Connecting to KM900 in UART Mode (COM7 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8868) prebooting...
Release power button. Booting...
Main Loader answer timed OUT!
BOOT Failed
Disconnected.


i try with other com-box (unibox) but the same problem

sirnavid2010 12-02-2009 08:42

Sgold3 new9 still have bug
 
SGOLD3 NEW9 STILL HAVE BUG ...
Welcome to LG Infineon SGOLD3 TOOL v2x by NoName®
models count: 23
Welcome to Sgold3 Module!!
Count supported models - 23
Disconnected.
PMB8878 Module 1.0a started. SW: Ver 2.0.0.38
Connecting to KM900 in UART Mode (COM5 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8868) prebooting...
Release power button. Booting...
Flash ID: FF00FF
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading ...
Analising EEPROM...
Unlock codes:
NCK[0]: 1260681610289147 (LOCKED)
Preprocessing FLS File....
Starting Flash Applet
Opening "KM900AT-00-V10f-ARB-XXX-JUN-12-2009+0.fls"...
Writing FLS:DSP
Sending SEC pack...
Done FLS:DSP
Writing FLS:STATIC_EEP
Sending SEC pack...
Done FLS:STATIC_EEP
Writing FLS:CODE
Sending SEC pack...
Writing FLS:CODE
Done FLS:CODE
Writing FLS:CUST_DISK
Sending SEC pack...
Done FLS:CUST_DISK
Writing FLS:ROOT_DISK
Sending SEC pack...
Certificate Failed!
http://forum.gsmhosting.com/vbb/imag...ons/report.gif http://forum.gsmhosting.com/vbb/imag...tons/quote.gifAND MISMATCHING VERSION!!!!

sirnavid2010 12-02-2009 08:44

Welcome to LG Infineon SGOLD3 TOOL v2x by NoName®
models count: 23
Welcome to Sgold3 Module!!
Count supported models - 23
Disconnected.
PMB8878 Module 1.0a started. SW: Ver 2.0.0.38
Connecting to KM900 in UART Mode (COM5 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8868) prebooting...
Release power button. Booting...
Flash ID: FF00FF
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading ...
Analising EEPROM...
Preprocessing FLS File....
Starting Flash Applet
Opening "KM900AT-00-V10b-EEU-XXX-MAY-05-2009+2.fls"...
Writing FLS:DSP
Sending SEC pack...
Done FLS:DSP
Writing FLS:STATIC_EEP
Sending SEC pack...
Done FLS:STATIC_EEP
Writing FLS:CODE
Sending SEC pack...
Writing FLS:CODE
Done FLS:CODE
Writing FLS:CUST_DISK
Sending SEC pack...
Done FLS:CUST_DISK
Writing FLS:ROOT_DISK
Sending SEC pack...
Certificate Failed!

foufou34 12-02-2009 08:58

problem solved with free method

http://www.forummobiles.com/index.php?showtopic=213565


plz plz Mr blank we need old card firmware 1.7 plz how to downgrade the firmware card

Mobileman_hu 12-02-2009 09:14

We need good working sw, not old card firmware:)

regareds:
Mobileman

foufou34 12-02-2009 09:34

Quote:

Originally Posted by Mobileman_hu (Post 5097356)
We need good working sw, not old card firmware:)

regareds:
Mobileman

the good working sw in the old firmware card 1.7.......................

foufou34 12-02-2009 09:38

this solution tested by me now and working

http://www.forummobiles.com/index.php?showtopic=213565

use : III Flash avec FlashTool_E2

foufou34 12-02-2009 09:42

use SGOLD3 NEW 9FOR UNLOCK IS GOOD

Disconnected.
PMB8878 Module 1.0a started. SW: Ver 2.0.0.38
Connecting to KM900 in UART Mode (COM3 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8868) prebooting...
Release power button. Booting...
Flash ID: FF00FF
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading ...
Analising EEPROM...
Unlock codes:
NCK[0]: 6546668541211046 (LOCKED)

foufou34 12-02-2009 09:44

SGOLD3 NEW9 succefull unlock KM900

Disconnected.
PMB8878 Module 1.0a started. SW: Ver 2.0.0.38
Connecting to KM900 in UART Mode (COM3 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8868) prebooting...
Release power button. Booting...
Flash ID: FF00FF
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading ...
Analising EEPROM...
Unlock codes:
NCK[0]: 6546668541211046 (LOCKED)

thank you Mr:blank

sirnavid2010 12-02-2009 09:48

Quote:

Originally Posted by foufou34 (Post 5097446)
this solution tested by me now and working

http://www.forummobiles.com/index.php?showtopic=213565

use : III Flash avec FlashTool_E2

thanks dear friend my phone is hang on version mismatching!

can i solve with your solution?!!

sirnavid2010 12-02-2009 09:49

Quote:

Originally Posted by foufou34 (Post 5097453)
use SGOLD3 NEW 9FOR UNLOCK IS GOOD

Disconnected.
PMB8878 Module 1.0a started. SW: Ver 2.0.0.38
Connecting to KM900 in UART Mode (COM3 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8868) prebooting...
Release power button. Booting...
Flash ID: FF00FF
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading ...
Analising EEPROM...
Unlock codes:
NCK[0]: 6546668541211046 (LOCKED)

i want write flash not unlock

sirnavid2010 12-02-2009 10:36

to z3xteam
 
pleaese help urgent for km900

flash with z3x and now hang on version mismatching

and use sgold3beta2new9 and error certificate

please solve my problem .i need it.
Welcome to LG Infineon SGOLD3 TOOL v2x by NoName®
models count: 23
Welcome to Sgold3 Module!!
Count supported models - 23
Disconnected.
PMB8878 Module 1.0a started. SW: Ver 2.0.0.38
Connecting to KM900 in UART Mode (COM5 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8868) prebooting...
Release power button. Booting...
Flash ID: FF00FF
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading ...
Analising EEPROM...
Preprocessing FLS File....
Starting Flash Applet
Opening "KM900AT-00-V10b-EEU-XXX-MAY-05-2009+2.fls"...
Writing FLS:DSP
Sending SEC pack...
Done FLS:DSP
Writing FLS:STATIC_EEP
Sending SEC pack...
Done FLS:STATIC_EEP
Writing FLS:CODE
Sending SEC pack...
Writing FLS:CODE
Done FLS:CODE
Writing FLS:CUST_DISK
Sending SEC pack...
Done FLS:CUST_DISK
Writing FLS:ROOT_DISK
Sending SEC pack...
Certificate Failed!

umadineshdas 12-02-2009 11:00

change the battery and again try to flash.............................

sirnavid2010 12-02-2009 11:14

battery is full i think this is bug in this box.and i want fix this bug from z3x team please help.

sirnavid2010 12-02-2009 14:01

my lg km900 stil error please fix buggggggggggg


All times are GMT +1. The time now is 01:29.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.29285 seconds with 5 queries

SEO by vBSEO