Sm-g892a problem unlocking [Answered] - GSM-Forum

Dzomega · 11-19-2018, 22:19

Model: SM-G892A
Android version: 8.0.0
PDA version: G892AUCU3BRJ2
CSC version: G892AATT3BRJ2
Phone version: G892AUCU3BRJ2
Product code: SM2G892AZAAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38J8089SMR
IMEI: 3577*********
HW version: REV0.5
RF cal date: 2017.08.10
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM13 detected
Reading data from phone... OK
Calculating... error (0)

Done with Samsung Tool PRO v.34.3

need modem from combination bit3

Dzomega · 11-19-2018, 22:31

after factory rest and try

Reading phone info...
Model: SM-G892A
Android version: 8.0.0
PDA version: G892AUCU3BRJ2
CSC version: G892AATT3BRJ2
Phone version: G892AUCU3BRJ2
Product code: SM2G892AZAAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38J8089SMR
IMEI: 357712081664632
HW version: REV0.5
RF cal date: 2017.08.10
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM13 detected
Reading data from phone... OK
Calculating...
Exception: Access violation at address 0040A48B in module 'SamsungToolPRO.exe'. Read of address 00000000

Done with Samsung Tool PRO v.34.3

**blang** · 11-20-2018, 11:14

New security phone , wait for update.

RazoR888 · 01-21-2019, 21:25

Same Here

Code:

 Operation: Read Codes via Server
 Selected model: SM-G892A
 Software version: 34.8
 
 Checking Login and Password... OK
 Ballance: 5 crd.
 You have 5 credit(s) left. This operation takes 5 credits.Continue?  Yes
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-G892A
 Android version: 8.0.0
 PDA version: G892AUCS3BRG1
 CSC version: G892AATT3BRG1
 Phone version: G892AUCS3BRG1
 Product code: SM2G892AZAAATT
 CSC country code: USA
 CSC sales code: ATT
 Phone SN: R38J70KNZAH
 IMEI: 357712080945164
 HW version: REV0.5
 RF cal date: 2017.07.31
 Chip name: MSM8998
 Modem board: MSM8998
 Security patch: 2018-07-01
 Boot Warranty bit: 0
 SIM State: ABSENT
 Waiting for device to become ready... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Reading data from phone... OK
 Searching Ramdump interface... COM8 detected
 Reading data from phone... OK
 Calculating...
 Exception: Access violation at address 0040A48B in module 'SamsungToolPRO.exe'. Read of address 00000000

Any Solution ???

robertyanta83 · 01-22-2019, 05:48

Quote:

Originally Posted by Dzomega

Model: SM-G892A
Android version: 8.0.0
PDA version: G892AUCU3BRJ2
CSC version: G892AATT3BRJ2
Phone version: G892AUCU3BRJ2
Product code: SM2G892AZAAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38J8089SMR
IMEI: 3577*********
HW version: REV0.5
RF cal date: 2017.08.10
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM13 detected
Reading data from phone... OK
Calculating... error (0)

Done with Samsung Tool PRO v.34.3

need modem from combination bit3

here you go ENG_MODEM try and post result

Br

RazoR888 · 01-22-2019, 16:41

Quote:

Originally Posted by robertyanta83

here you go ENG_MODEM try and post result

Br

read codes done and 5 credits gone but phone say incorrect code

Code:

peration: Read Codes via Server
 Selected model: SM-G892A
 Software version: 34.8
 
 Checking Login and Password... OK
 Ballance: 5 crd.
 You have 5 credit(s) left. This operation takes 5 credits.Continue?  Yes
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-G892A
 Android version: 8.0.0
 PDA version: G892AUCS3BRG1
 CSC version: G892AATT3BRG1
 Phone version: G892AUCS3ARG1
 Product code: SM2G892AZAAATT
 CSC country code: USA
 CSC sales code: ATT
 Phone SN: R38J70KNZAH
 IMEI: 357712080945164
 HW version: REV0.5
 RF cal date: 2017.07.31
 Chip name: MSM8998
 Modem board: MSM8998
 Security patch: 2018-07-01
 Boot Warranty bit: 0
 SIM State: NETWORK_LOCKED
 Waiting for device to become ready... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Reading data from phone... OK
 Searching Ramdump interface... COM42 detected
 Reading data from phone... OK
 Calculating... OK
 Searching server... OK
 Waiting for server answer... OK
 Freeze code: 07513847
 NET lock: 94160538
 SUB lock: 00000000
 SP lock: 00000000
 CP lock: 00000000
 For check lock status: *#7465625#

Any idea

RazoR888 · 01-22-2019, 18:38

Quote:

Originally Posted by RazoR888

read codes done and 5 credits gone but phone say incorrect code

Code:

peration: Read Codes via Server
 Selected model: SM-G892A
 Software version: 34.8
 
 Checking Login and Password... OK
 Ballance: 5 crd.
 You have 5 credit(s) left. This operation takes 5 credits.Continue?  Yes
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-G892A
 Android version: 8.0.0
 PDA version: G892AUCS3BRG1
 CSC version: G892AATT3BRG1
 Phone version: G892AUCS3ARG1
 Product code: SM2G892AZAAATT
 CSC country code: USA
 CSC sales code: ATT
 Phone SN: R38J70KNZAH
 IMEI: 357712080945164
 HW version: REV0.5
 RF cal date: 2017.07.31
 Chip name: MSM8998
 Modem board: MSM8998
 Security patch: 2018-07-01
 Boot Warranty bit: 0
 SIM State: NETWORK_LOCKED
 Waiting for device to become ready... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Reading data from phone... OK
 Searching Ramdump interface... COM42 detected
 Reading data from phone... OK
 Calculating... OK
 Searching server... OK
 Waiting for server answer... OK
 Freeze code: 07513847
 NET lock: 94160538
 SUB lock: 00000000
 SP lock: 00000000
 CP lock: 00000000
 For check lock status: *#7465625#

Any idea

Unlock done and code work
1-flash eng modem in Ap
2-read codes via server
3-flash stock rom and input code
Done

Thanks
robertyanta83

robertyanta83 · 01-23-2019, 04:38

Quote:

Originally Posted by RazoR888

Unlock done and code work
1-flash eng modem in Ap
2-read codes via server
3-flash stock rom and input code
Done

Thanks
robertyanta83

always a pleasure to help people, but if not to much to ask hit the thanks button

Br

topspin220 · 06-26-2019, 17:32

Hi, the link is broken , hope than someone can upload the file

thxs for you help

topspin220 · 06-27-2019, 02:35

@robertyanta83 ,the link u posted is broken , I finally got it and your solution is real THXS

- Flash the ENGMODEM in the AP , in my case I didnt use z3x used an modified ODIN attached in the ZIP

- after than use de Z3x and read the codes (only 5 credits)

- The code is gonna be incorrect , in my case only flashed the MODEM in the CP field

DONEEEEEEEE

Again thxs to robertyanta83 for HELP US

gsm_service4u · 06-27-2019, 02:51

Quote:

Originally Posted by topspin220

@robertyanta83 ,the link u posted is broken , I finally got it and your solution is real THXS

- Flash the ENGMODEM in the AP , in my case I didnt use z3x used an modified ODIN attached in the ZIP

- after than use de Z3x and read the codes (only 5 credits)

- The code is gonna be incorrect , in my case only flashed the MODEM in the CP field

DONEEEEEEEE

Again thxs to robertyanta83 for HELP US

yes this is the way for most models via z3x and other tools nowadays, nothing new here

Robertcell22 · 11-29-2019, 15:15

colega necesito el eng moden y no puedo descargar desde tu enlace

11-19-2018, 22:19	#1 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	Sm-g892a problem unlocking [Answered] Model: SM-G892A Android version: 8.0.0 PDA version: G892AUCU3BRJ2 CSC version: G892AATT3BRJ2 Phone version: G892AUCU3BRJ2 Product code: SM2G892AZAAATT CSC country code: USA CSC sales code: ATT Phone SN: R38J8089SMR IMEI: 3577********* HW version: REV0.5 RF cal date: 2017.08.10 Chip name: MSM8998 Modem board: MSM8998 Security patch: 2018-10-01 Boot Warranty bit: 0 SIM State: ABSENT Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM13 detected Reading data from phone... OK Calculating... error (0) Done with Samsung Tool PRO v.34.3 need modem from combination bit3

11-19-2018, 22:31	#2 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	after factory rest and try Reading phone info... Model: SM-G892A Android version: 8.0.0 PDA version: G892AUCU3BRJ2 CSC version: G892AATT3BRJ2 Phone version: G892AUCU3BRJ2 Product code: SM2G892AZAAATT CSC country code: USA CSC sales code: ATT Phone SN: R38J8089SMR IMEI: 357712081664632 HW version: REV0.5 RF cal date: 2017.08.10 Chip name: MSM8998 Modem board: MSM8998 Security patch: 2018-10-01 Boot Warranty bit: 0 SIM State: ABSENT Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM13 detected Reading data from phone... OK Calculating... Exception: Access violation at address 0040A48B in module 'SamsungToolPRO.exe'. Read of address 00000000 Done with Samsung Tool PRO v.34.3

11-20-2018, 11:14	#3 (permalink)
blang Product Manager Join Date: Oct 2000 Location: future Posts: 22,431 Member: 2368 Status: Offline Sonork: 100.111111 Thanks Meter: 186,557	New security phone , wait for update.

06-26-2019, 17:32	#9 (permalink)
topspin220 Junior Member Join Date: Jan 2016 Posts: 21 Member: 2511800 Status: Offline Thanks Meter: 7	Hi, the link is broken , hope than someone can upload the file thxs for you help

06-27-2019, 02:35	#10 (permalink)
topspin220 Junior Member Join Date: Jan 2016 Posts: 21 Member: 2511800 Status: Offline Thanks Meter: 7	@robertyanta83 ,the link u posted is broken , I finally got it and your solution is real THXS - Flash the ENGMODEM in the AP , in my case I didnt use z3x used an modified ODIN attached in the ZIP - after than use de Z3x and read the codes (only 5 credits) - The code is gonna be incorrect , in my case only flashed the MODEM in the CP field DONEEEEEEEE Again thxs to robertyanta83 for HELP US

11-29-2019, 15:15	#12 (permalink)
Robertcell22 Junior Member Join Date: Jun 2019 Location: Peru pachacamac Posts: 1 Member: 2915163 Status: Offline Thanks Meter: 0	colega necesito el eng moden y no puedo descargar desde tu enlace