sm-g925f android version 6.0.1 imei problem - Page 2 - GSM-Forum

kechup10 · 04-18-2016, 15:23

Quote:

Originally Posted by abrapy

can you provide modem for test?

tengo el mismo problema, mi g925f esta en modo solo llamadas de emergencia, si serias tan amable de pasar el link solo del modem que utilizaste

El modem lo comparten un poco mas arriba...no lo tengo a mano para subirlo en este momento. Ojo, solo es necesario flashear el modem en caso de estar en android 6.0.1...si aun se encuentra en 5.1 puedes hacer el proceso directamente de repair IxxI y Patch certificate luego.

i.kubat · 05-23-2016, 09:51

Quote:

Originally Posted by super decent

my problem solved with this modem,i write this modem and repair imei easily and after that patch certificate as well for signal,thanks bro

6.0.1 modem ok Current version can not be patched
Done with Samsung Tool PRO v.25.4 Failed

alphapro · 05-30-2016, 05:38

Flash OJ1 modem and try

Sent from my Nexus 5X using Tapatalk

GSM CLINIQUE · 06-08-2016, 01:08

Quote:

Originally Posted by kechup10

Muchas gracias Markhaines1985, me sirvio tu aporte.
Luego de la actualizacion a 6.0.1, un cliente me trajo un G925F que decia "solo llamadas de emergencia". Luego de 2 dias tratando de reparar redes, escribir cert, etc logre solucionarlo flasheando el modem que dejaste.
Me tiraba error z3x, tanto como octopus antes de flashear tu modem.
El procedimiento lo hice con z3x Samsung Tool Pro V24.7 y salio sin problemas:

1 - Flasehar MODEM_G925F_OJ1, con Odin v3.10.6 en la pestaña PHONE
2 - Rootear con CF-Auto-Root-zerolte-zeroltexx-smg925f
3 - En z3x pestaña "Repair" dar a Reset EFS (recuerden hacer un backup antes)
4 - Escribir nuevamente el IxxI, dar en "Repair"
5 - Dar en "Patch Certificate" (Luego de esto ya deberia dar señal, pero si ponen *#06# veran que S/N figura vacio)
6 - Para recuperar el S/N vuelven a escribir la EFS. Pestaña "Backup" dan en "Write EFS" y buscan el backup que habian hecho anteriormente.

Esa fue mi experiencia y todo se realiza con Samsung Tool PRO v24.7. En octopus no alcance a relizar el procedimiento pero calculo que se debe solucionar tambien. Gracias

Gracias problema resuelto con su ayuda!

kang85 · 08-09-2016, 18:45

Waiting ADB device... OK
Reading phone info...
Model: SM-G925F
Android version: 6.0.1
Product code:
Phone version:
PDA version: G925FXXU3DPBG
CSC version: G925FBTU3DPB1
CSC country code: UK & IRE
CSC sales code: BTU
HW version:
Phone S/N: RF8G314F4EV
Modem board:
RF cal date:
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait... error (7.3)
Done with Samsung Tool PRO v.26.3

ldm1973 · 08-14-2016, 23:25

wish I had seen this before I messed my phone up lol

v11 · 08-17-2016, 08:01

what is it Running zTool, please wait... error (7.3)

THX

Please answer...

ozeey · 08-18-2016, 11:27

flash this software

https://www.androidfilehost.com/?fid=24671318762849159

root your tel

CF-Auto-Root-zerolte-zeroltexx-smg925f 6.0.1

wirte cert

done

shoaibrao · 08-22-2016, 12:16

Quote:

Originally Posted by ozeey

flash this software

https://www.androidfilehost.com/?fid=24671318762849159

root your tel

CF-Auto-Root-zerolte-zeroltexx-smg925f 6.0.1

wirte cert

done

Failed
Need More Help Plz

Code:

Model: SM-G925F Android version: 6.0.1 Product code: Phone version: G925FXXU4DPG4 PDA version: G925FXXU4DPG8 CSC version: G925FAUT4DPG1 CSC country code: Switzerland CSC sales code: AUT HW version: Phone S/N: RF1D45EJGGR Modem board: SHANNON333 RF cal date: IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... error (9) Done with Samsung Tool PRO v.26.4

aliraxa · 08-22-2016, 14:34

Quote:

Originally Posted by ozeey

flash this software

https://www.androidfilehost.com/?fid=24671318762849159

root your tel

CF-Auto-Root-zerolte-zeroltexx-smg925f 6.0.1

wirte cert

done

It Worked for me but there is one issue only one network is working.all networks are not working.
may be someone can help regarding this issue.thanks

extern · 08-22-2016, 19:34

Hi All

Galaxy S6 edge, G925F. IMEI problem. I suppose the G925FXXS4DPG2_G925FOXX3DPD1_G925FXXS4DPG1_HOME.tar software. DRK Kernel_G925F_Sforum repair, and then root. your right, but there is no network. Sim card to see the phone. I suppose the OJ1 modem and from then on no signal, you do not see your phone sim card, a box z3x not see the modem, cert I can not, I can not IMEI, the modem will disappear

?????

extern · 08-23-2016, 06:52

Only OJ1 modem patch ?

kang85 · 08-23-2016, 16:57

Waiting ADB device... OK
Reading phone info...
Model: SM-G925F
Android version: 6.0.1
Product code:
Phone version:
PDA version: G925FXXU4DPG8
CSC version: G925FAUT4DPG1
CSC country code: Switzerland
CSC sales code: AUT
HW version:
Phone S/N: RF8G314F4EV
Modem board:
RF cal date:
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait... error (7.3)

Done with Samsung Tool PRO v.26.5

welshlad27 · 08-23-2016, 19:35

PDA G920FXXS4DPG2
CSC G920FBTU3DPD2

can this firmware be downgraded if so to what 1

jujomar · 08-25-2016, 09:48

Can you instal OJ1 modem in a G925FXXU4DPGW 6.0.1 (with a 4 in Rollback protection)?

05-30-2016, 05:38	#18 (permalink)
alphapro Junior Member Join Date: May 2016 Posts: 5 Member: 2567182 Status: Offline Thanks Meter: 2	Flash OJ1 modem and try Sent from my Nexus 5X using Tapatalk

08-09-2016, 18:45	#20 (permalink)
kang85 Junior Member Join Date: Jul 2016 Posts: 25 Member: 2604200 Status: Offline Thanks Meter: 3	Waiting ADB device... OK Reading phone info... Model: SM-G925F Android version: 6.0.1 Product code: Phone version: PDA version: G925FXXU3DPBG CSC version: G925FBTU3DPB1 CSC country code: UK & IRE CSC sales code: BTU HW version: Phone S/N: RF8G314F4EV Modem board: RF cal date: IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... error (7.3) Done with Samsung Tool PRO v.26.3

08-14-2016, 23:25	#21 (permalink)
ldm1973 Junior Member Join Date: Feb 2015 Posts: 10 Member: 2348404 Status: Offline Thanks Meter: 3	wish I had seen this before I messed my phone up lol

08-17-2016, 08:01	#22 (permalink)
v11 No Life Poster Join Date: Dec 2005 Location: RIFF-XILINX Posts: 993 Member: 214827 Status: Offline Sonork: 100.1597158 Thanks Meter: 59	what is it Running zTool, please wait... error (7.3) THX Please answer...

08-18-2016, 11:27	#23 (permalink)
ozeey Freak Poster Join Date: Nov 2004 Age: 44 Posts: 116 Member: 91607 Status: Offline Thanks Meter: 41	flash this software https://www.androidfilehost.com/?fid=24671318762849159 root your tel CF-Auto-Root-zerolte-zeroltexx-smg925f 6.0.1 wirte cert done

08-22-2016, 19:34	#26 (permalink)
extern Insane Poster Join Date: Jul 2012 Posts: 63 Member: 1791766 Status: Offline Thanks Meter: 2	Hi All Galaxy S6 edge, G925F. IMEI problem. I suppose the G925FXXS4DPG2_G925FOXX3DPD1_G925FXXS4DPG1_HOME.tar software. DRK Kernel_G925F_Sforum repair, and then root. your right, but there is no network. Sim card to see the phone. I suppose the OJ1 modem and from then on no signal, you do not see your phone sim card, a box z3x not see the modem, cert I can not, I can not IMEI, the modem will disappear ?????

08-23-2016, 06:52	#27 (permalink)
extern Insane Poster Join Date: Jul 2012 Posts: 63 Member: 1791766 Status: Offline Thanks Meter: 2	Only OJ1 modem patch ?

08-23-2016, 16:57	#28 (permalink)
kang85 Junior Member Join Date: Jul 2016 Posts: 25 Member: 2604200 Status: Offline Thanks Meter: 3	Waiting ADB device... OK Reading phone info... Model: SM-G925F Android version: 6.0.1 Product code: Phone version: PDA version: G925FXXU4DPG8 CSC version: G925FAUT4DPG1 CSC country code: Switzerland CSC sales code: AUT HW version: Phone S/N: RF8G314F4EV Modem board: RF cal date: IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... error (7.3) Done with Samsung Tool PRO v.26.5

08-23-2016, 19:35	#29 (permalink)
welshlad27 Insane Poster Join Date: Dec 2013 Posts: 92 Member: 2080885 Status: Offline Thanks Meter: 44	PDA G920FXXS4DPG2 CSC G920FBTU3DPD2 can this firmware be downgraded if so to what 1

08-25-2016, 09:48	#30 (permalink)
jujomar Junior Member Join Date: Aug 2016 Posts: 35 Member: 2613607 Status: Offline Thanks Meter: 2	Can you instal OJ1 modem in a G925FXXU4DPGW 6.0.1 (with a 4 in Rollback protection)?