SM-J330F knox void, unlock error

[Miftah_Lutfi]

Hello..,
SM-J330F knox void 1

Reading codes using sever ('Upload' algo) but error
tried many times., also with V30.1

Checking Login and Password... OK
Ballance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits.Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J330F
Android version: 7.0
Product code: SM-J330FZKDKSA
Phone version: J330FXXU1AQFB
PDA version: J330FXWU1AQF9
CSC version: J330FOJV1AQF9
CSC country code: KSA
CSC sales code: KSA
HW version: MP 0.500
Phone SN: R58Jxxxx
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2017-06-01
RF cal date: 20171004
IMEI: 358870089xxxxxx
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM4 detected
Calculating... error (1)

Done with Samsung Tool PRO v.30.2

Please what's the problem..???

[Miftah_Lutfi]

UP..., need solution..,

[Xaker2012]

Model: SM-J330F
Android version: 7.0
Product code: SM2J330FZSDETL
Phone version: J330FXXU1AQF7
PDA version: J330FXXU1AQI2
CSC version: J330FOXX1AQI1
CSC country code: Czech Republic
CSC sales code: ETL
HW version: MP 0.400
Phone SN: R58J81CP27Y
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2017-08-01
RF cal date: 20170806
IMEI: 3------------
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM76 detected
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 94709364
NET lock: 91839317
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.30.2

[Miftah_Lutfi]

Originally Posted by Xaker2012

Model: SM-J330F
Android version: 7.0
Product code: SM2J330FZSDETL
Phone version: J330FXXU1AQF7
PDA version: J330FXXU1AQI2
CSC version: J330FOXX1AQI1
CSC country code: Czech Republic
CSC sales code: ETL
HW version: MP 0.400
Phone SN: R58J81CP27Y
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2017-08-01
RF cal date: 20170806
IMEI: 3------------
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM76 detected
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 94709364
NET lock: 91839317
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.30.2

Which methode..??
Upload Algo or Diag Algo..??
Mine, knox is void

[orhan5]

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever ('Diag' algo):
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone using sever.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes via server' button, select 'Diag', write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)

Reading codes using sever ('Upload' algo):
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, select 'Upload' write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-J330F
Software version: 31.4

Checking Login and Password... OK
Ballance: 45 crd.
You have 45 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J330F
Android version: 7.0
PDA version: FA70_J330FXXU1AQF6
CSC version:
Phone version: J330FXXU1AQEB
Product code: SM-J330FZDDSER
CSC country code:
CSC sales code:
Phone SN: R58JA638X7A
IMEI: 353xxxxxxxxxxxx
HW version: MP 0.500
RF cal date: 20171027
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2017-05-01
Boot Warranty bit: 1
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM31 detected
Reading data from phone... error (1)

Done with Samsung Tool PRO v.31.4







help please