SM-J701f unlock error [Answered]

[pradyumnasahoo]

[pradyumnasahoo]

how can unlock plz tell.....

[Baba SW]

check diag port and driver

[pradyumnasahoo]

driver is ok... problem in modem version....

[pradyumnasahoo]

hecking Login and Password... OK
Ballance: 40 crd.
You have 40 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J701F
Android version: 8.1.0
PDA version: J701FDDU6BRI1
CSC version: J701FODD6BRI1
Phone version: J701FXXU6BRH5
Product code: SM-J701FZKDINS
CSC country code: India
CSC sales code: INS
Phone SN: R28K2114WNV
IMEI: 352174094971196
HW version: MP 0.400
RF cal date: 20180209
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-09-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Executing... OK
Reading data from phone... error (0 15)
Reboot phone and try again.
Check ADB drivers, USB cable. Don't use USB Hubs
If this repeated then reflash phone and make factory reset.

Done with Samsung Tool PRO v.34.3

[jkmobile53]

Originally Posted by pradyumnasahoo

driver is ok... problem in modem version....

@Dear

First full flash then unlock..........

[pradyumnasahoo]

sir already flash......

[pradyumnasahoo]

UNLOCK INSTRUCTIONS:
To unlock:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' for direct unlock.

Reading codes using sever:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone using sever.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)

Operation: Unlock
Selected model: SM-J701F
Software version: 34.3

Waiting ADB device... OK
Reading phone info...
Model: SM-J701F
Android version: 8.1.0
PDA version: J701FXXU6BRH9
CSC version: G965FOXM1BRF7
Phone version: J701FXXU6BRH5
Product code: SM-J701FZKDINS
CSC country code: India
CSC sales code: INS
Phone SN: R28K2114WNV
IMEI: 352174094971196
HW version: MP 0.400
RF cal date: 20180209
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-06-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... error (1)
Initialization zTool... error (0 1)
Try downgrade modem if possible

Done with Samsung Tool PRO v.34.3

[blang]

Try other method of unlock read codes via server.
other way for bit 6 not work.

[>>Gsmmilon>>]

J701F U6 Binary unlock Not Support Z3x i alredy try not work.. i unlocked done credit

[arimob]

have you tried flashing combination and then read codes with combination

[pradyumnasahoo]

Originally Posted by >>Gsmmilon>>

J701F U6 Binary unlock Not Support Z3x i alredy try not work.. i unlocked done credit

So how can unlock????
Any salutation

[frosted]

Originally Posted by blang

Try other method of unlock read codes via server.
other way for bit 6 not work.

if knox is tripped, not 00 anymore, what should we do for unlocking bit 6?

can't downgrade to 7.0 either?

[mickeybrown026]

Update the software to the latest version then unlock again

[frosted]

Originally Posted by mickeybrown026

Update the software to the latest version then unlock again

unlock using z3x is failed because knox tripped but somehow customer sees advert in online and he said the person was using ****** to unlock and it was a successful unlock without rooting..

is it true that we can unlock now even knox trigger is not 00 anymore?